Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings (ISO 1452-3:2009, corrected version 2010-03-01)

ISO 1452-3:2009 specifies the characteristics of fittings made from unplasticized poly(vinyl chloride) (PVC‑U) for piping systems intended for water supply and for buried and above ground drainage and sewerage under pressure. It also specifies the test parameters for the test methods referred to.
In conjunction with ISO 1452-1, ISO 1452-2 and ISO 1452-5, it is applicable to PVC‑U fittings and to joints with components of PVC‑U, other plastics and non-plastics materials intended to be used for the following:
- water mains and services buried in the ground;
- conveyance of water above ground for both outside and inside buildings;
- buried and above ground drainage and sewerage under pressure.
It is applicable to fittings in piping systems intended for the supply of water under pressure up to and including 25 °C (cold water), intended for human consumption and for general purposes as well as for waste water under pressure. It is also applicable to components for the conveyance of water and waste water up to and including 45 °C.

Kunststoff-Rohrleitungssysteme für die Wasserversorgung und für erdverlegte und nicht erdverlegte Entwässerungs- und Abwasserdruckleitungen - Weichmacherfreies Polyvinylchlorid (PVC-U) - Teil 3: Formstücke (ISO 1452-3:2009, korrigierte Fassung 2010-03-01)

Systèmes de canalisations en plastique pour l'alimentation en eau, pour branchements et collecteurs d'assainissement enterrés et aériens avec pression - Poly(chlorure de vinyle) non plastifié (PVC-U) - Partie 3: Raccords (ISO 1452-3:2009, version corrigée 2010-03-01)

L'ISO 1452-3:2009 spécifie les caractéristiques des raccords en poly(chlorure de vinyle) non plastifié (PVC‑U) pour les systèmes de canalisations destinés à l'alimentation en eau et pour les collecteurs d'assainissement enterrés et aériens avec pression. Elle spécifie également les paramètres d'essai pour les méthodes d'essai auxquelles il y est fait référence.
Conjointement à l'ISO 1452-1, à l'ISO 1452-2, à l'ISO 1452-4 et à l'ISO 1452-5, elle s'applique aux raccords en PVC U et à leurs assemblages avec des composants en PVC‑U, ou en d'autres matériaux, plastiques ou non plastiques, destinés à être utilisées dans:
— conduites principales et branchements enterrés;
— transport de l'eau en aérien, à l'extérieur et à l'intérieur des bâtiments;
— collecteurs d'assainissement enterrés et aériens avec pression.
L'ISO 1452-3:2009 s'applique aux systèmes de canalisations destinés à l'alimentation en eau sous pression jusqu'à 25 °C (eau froide) compris, destinée à la consommation humaine et pour les besoins généraux aussi bien que les eaux usées sous pression. Elle s'applique également aux composants pour le transport de l'eau et des eaux usées jusqu'à 45 °C inclus.

Cevni sistemi iz polimernih materialov za oskrbo z vodo in za podzemno in nadzemno odvodnjavanje in kanalizacijo pod tlakom - Nemehčan polivinilklorid (PVC-U) - 3. del: Fitingi (ISO 1452-3:2009, popravljena verzija 2010-03-01)

Ta del ISO 1452 določa značilnosti fitingov, narejenih iz nemehčanega polivinilklorida (PVC-U), za cevne sisteme, namenjene oskrbi z vodo ter podzemnemu in nadzemnemu odvodnjavanju in kanalizaciji pod tlakom. Prav tako določa preskusne parametre za preskusne metode, na katere se sklicuje ta del ISO 1452. Skupaj z ISO 1452-1, ISO 1452-2 in ISO 1452-5 velja za polivinilkloridne (PVC-U) fitinge in spoje s sestavnimi deli iz PVC-U, druge vrste polimernih in nepolimernih materialov, namenjenih za uporabo kot sledi: a) za podzemne glavne vodovode in dovode; b) nadzemni prenos vode zunaj in znotraj stavb; c) podzemno in nadzemno odvodnjavanje in kanalizacijo pod tlakom. Velja za fitinge v cevnih sistemih, ki se uporabljajo za oskrbo z vodo pod tlakom do vključno 25°C (s hladno vodo), namenjeno za prehrano ljudi in za splošne namene, ter za odpadne vode pod tlakom. Ta del ISO 1452 velja tudi za komponente prenosa vode in odpadne vode do vključno 45°C. Za temperature med 25°C in 45°C velja Slika A.1 iz ISO 1452-2:2009.

General Information

Status
Published
Publication Date
05-Oct-2010
Withdrawal Date
29-Apr-2011
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
06-Oct-2010
Due Date
07-Nov-2011
Completion Date
06-Oct-2010

Relations

Buy Standard

Standard
EN ISO 1452-3:2010
English language
45 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1452-3:2010
01-december-2010
1DGRPHãþD
SIST EN ISO 1452-3:2010
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY]DRVNUER]YRGRLQ]DSRG]HPQRLQ
QDG]HPQRRGYRGQMDYDQMHLQNDQDOL]DFLMRSRGWODNRP1HPHKþDQSROLYLQLONORULG
39&8 GHO)LWLQJL ,62SRSUDYOMHQDYHU]LMD
Plastics piping systems for water supply and for buried and above-ground drainage and
sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings
(ISO 1452-3:2009, corrected version 2010-03-01)
Kunststoff-Rohrleitungssysteme für die Wasserversorgung und für erdverlegte und nicht
erdverlegte Entwässerungs- und Abwasserdruckleitungen - Weichmacherfreies
Polyvinylchlorid (PVC-U) - Teil 3: Formstücke (ISO 1452-3:2009, korrigierte Fassung
2010-03-01)
Systèmes de canalisations en plastique pour l'alimentation en eau, pour branchements
et collecteurs d'assainissement enterrés et aériens avec pression - Poly(chlorure de
vinyle) non plastifié (PVC-U) - Partie 3: Raccords (ISO 1452-3:2009, version corrigée
2010-03-01)
Ta slovenski standard je istoveten z: EN ISO 1452-3:2010
ICS:
23.040.45 Fitingi iz polimernih Plastics fittings
materialov
91.140.60 Sistemi za oskrbo z vodo Water supply systems
93.025 Zunanji sistemi za prevajanje External water conveyance
vode systems
SIST EN ISO 1452-3:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1452-3:2010

---------------------- Page: 2 ----------------------

SIST EN ISO 1452-3:2010


EUROPEAN STANDARD
EN ISO 1452-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2010
ICS 93.025; 91.140.60; 23.040.20; 23.040.45 Supersedes EN ISO 1452-3:2009
English Version
Plastics piping systems for water supply and for buried and
above-ground drainage and sewerage under pressure -
Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings (ISO
1452-3:2009, corrected version 2010-03-01)
Systèmes de canalisations en plastique pour l'alimentation Kunststoff-Rohrleitungssysteme für die Wasserversorgung
en eau, pour branchements et collecteurs d'assainissement und für erdverlegte und nicht erdverlegte Entwässerungs-
enterrés et aériens avec pression - Poly(chlorure de vinyle) und Abwasserdruckleitungen - Weichmacherfreies
non plastifié (PVC-U) - Partie 3: Raccords (ISO 1452- Polyvinylchlorid (PVC-U) - Teil 3: Formstücke (ISO 1452-
3:2009, version corrigée 2010-03-01) 3:2009, korrigierte Fassung 2010-03-01)
This European Standard was approved by CEN on 23 September 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1452-3:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 1452-3:2010
EN ISO 1452-3:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 1452-3:2010
EN ISO 1452-3:2010 (E)
Foreword
The text of ISO 1452-3:2009, corrected version 2010-03-01 has been prepared by Technical Committee
ISO/TC 138 “Plastics pipes, fittings and valves for the transport of fluids” of the International Organization for
Standardization (ISO) and has been taken over as EN ISO 1452-3:2010 by Technical Committee CEN/TC 155
“Plastics piping systems and ducting systems” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2011, and conflicting national stan
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.