CEN/TR 14473:2020
(Main)Transportable gas cylinders - Porous materials for acetylene cylinders
Transportable gas cylinders - Porous materials for acetylene cylinders
This document contains information about monolithic porous materials used in individual acetylene cylinders and in acetylene cylinder bundles in Europe. It does not claim to be exhaustive.
NOTE Where there is any conflict between this document and any applicable regulation, the regulation always takes precedence.
Ortsbewegliche Gasflaschen - Poröse Materialien für Acetylenflaschen
Dieses Dokument enthält Daten und Angaben zu monolithischen porösen Materialien für Acetylenflaschen und Acetylenflaschenbündel in Europa. Es erhebt keinen Anspruch auf Vollständigkeit.
ANMERKUNG Sofern irgendein Widerspruch zwischen diesem Dokument und jeglicher anwendbaren Rechts-vorschrift besteht, hat immer die Rechtsvorschrift Vorrang.
Bouteilles à gaz transportables - Matières poreuses pour bouteilles à acétylène
Le présent document contient des informations sur les matières poreuses monolithiques utilisées dans les bouteilles à acétylène individuelles et dans les cadres de bouteilles à acétylène en Europe. Il ne prétend pas être exhaustif.
NOTE En cas de conflit entre le présent document et toute réglementation applicable, la réglementation prévaut toujours.
Premične plinske jeklenke - Porozni materiali za jeklenke za acetilen
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2021
Nadomešča:
SIST-TP CEN/TR 14473:2014
Premične plinske jeklenke - Porozni materiali za jeklenke za acetilen
Transportable gas cylinders - Porous materials for acetylene cylinders
Ortsbewegliche Gasflaschen - Poröse Materialien für Acetylenflaschen
Bouteilles à gaz transportables - Matériaux poreux pour bouteilles d'acétylène
Ta slovenski standard je istoveten z: CEN/TR 14473:2020
ICS:
23.020.35 Plinske jeklenke Gas cylinders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
CEN/TR 14473
TECHNICAL REPORT
RAPPORT TECHNIQUE
November 2020
TECHNISCHER BERICHT
ICS 23.020.35 Supersedes CEN/TR 14473:2014
English Version
Transportable gas cylinders - Porous materials for
acetylene cylinders
Bouteilles à gaz transportables - Matières poreuses Ortsbewegliche Gasflaschen - Poröse Materialien für
pour bouteilles à acétylène Acetylenflaschen
This Technical Report was approved by CEN on 2 November 2020. It has been drawn up by the Technical Committee CEN/TC 23.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 14473:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Source and nature of the data about the listed porous materials . 5
5 Country codes . 6
6 Overview (in alphabetic order) of porous materials for which data were available
and could be checked . 6
6.1 Single cylinders and bundles with TPED evaluation of conformity . 6
6.2 Cylinders and/or bundles with reassessment to TPED . 7
6.3 Single cylinders and bundles that are type approved based on national regulations . 8
7 Data for porous materials for acetylene cylinders approved to TPED evaluation of
conformity at time of manufacture . 9
8 Data for porous materials for acetylene cylinders reassessed in accordance with
TPED . 22
9 Data for porous materials for individual acetylene cylinders and that are type
approved based on national regulations . 27
Bibliography . 53
European foreword
This document (CEN/TR 14473:2020) has been prepared by Technical Committee CEN/TC 23
“Transportable gas cylinders”, the secretariat of which is held by BSI.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN/TR 14473:2014.
Compared to the previous version, the following changes apply:
a) data of further porous materials has been added;
b) the structure of the document has been changed:
— Clause 7 contains data for porous materials for acetylene cylinders approved to TPED
evaluation of conformity at time of manufacture;
— Clause 8 contains data for porous materials for acetylene cylinders reassessed in accordance
with TPED;
— Clause 9 contains data for porous materials for individual acetylene cylinders and that are type
approved based on national regulations;
c) the document has been aligned with the current principles and rules for the structure and drafting
of CEN and CENELEC documents.
For amendments or changes to this report, an application shall be made to the Secretariat of
CEN/TC 23, with a copy of the documentation based on which the acetylene cylinders are placed on the
market (type approval by the competent authority or conformity assessment in accordance with
Directive 2010/35/EU (TPED)).
Introduction
This document contains data and information about monolithic porous materials for acetylene
cylinders.
It does not contain information about non-monolithic porous materials.
In International Standards, weight is equivalent to a force, expressed in newton. However, in common
parlance the word “weight” continues to be used to mean “mass”, but this practice is deprecated
(ISO 80000-4).
In this document the unit bar is used, due to its universal use in the field of technical gases. It should,
however, be noted that bar is not an SI unit, and that the according SI unit for pressure is Pa
5 5 2
(1 bar = 10 Pa = 10 N/m ).
Pressure values given in this document are given as gauge pressure (pressure exceeding atmospheric
pressure) unless noted otherwise.
1 Scope
This document contains information about monolithic porous materials used in individual acetylene
cylinders and in acetylene cylinder bundles in Europe. It does not claim to be exhaustive.
NOTE Where there is any conflict between this document and any applicable regulation, the regulation
always takes precedence.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at http://www.electropedia.org/
4 Source and nature of the data about the listed porous materials
The data contained in the tables in Clauses 7 and 8 are derived from the documentation based on which
the acetylene cylinders were placed or still are on the market (type approval by the competent
authority or conformity assessment in accordance with TPED) and according to which they are
operated. In some cases a type approval or a TPED-certificate might no longer be valid but the cylinders
that are already on the market still may be used. For this purpose, information on old porous materials
is provided.
NOTE 1 The documentation provided was examined carefully before including the according information into
this Technical Report. Nevertheless, there might be discrepancies to the actual approval, e.g. because more recent
amendments exist which were not made available at the time of preparing this document. In some cases not all
information was available in the documents provided and consequently the according information is missing (for
example the maximum top clearance or the working pressure).
Acetylene cylinders that were reassessed in accordance with TPED may be filled with the filling values
conforming to the reassessment certificate throughout the EU. It should be noted that these values
might deviate from those of prior national approvals which still apply to those cylinders that were not
reassessed according to TPED.
Where no official documentation could be made available to CEN/TC 23/WG 31, the data for the porous
material is added with a note, that this information is shared by expert/porous material manufacturer
as extracted from the official documentation, but has not been presented to the working group. This is
of especial note in the case of reassessed acetylene cylinders, since every user can ask for a specific
reassessment.
Clause 7 contains information on porous materials for acetylene cylinders approved to TPED. It also
contains information on filling conditions for acetylene cylinder bundles in accordance with
EN ISO 13088:2012. The same filling ratio applies for the whole EU.
Clause 9 contains information on porous materials used in individual acetylene cylinders and cylinder
bundles that were type approved based on national regulations and/or standards.
If several years are indicated for the approval or certification, they refer to according amendments in
addition.
NOTE 2 The initial agreements of the French porous materials have been delivered on the basis of a data pair
“porous material/cylinder manufacturer”. Therefore, the name of the cylinder manufacturer has been detailed:
Chevalier Bertrand (CB), Schneider Industrie (SI), Pecquet Tesson (PTC), Société Métallurgique de Gerzat (SMG)
and Siebel (S).
NOTE 3 Every user (owner) of a cylinder can decide on its own commercial acetylene load, provided that this
load is less or equal to the maximum load given in the agreement.
5 Country codes
In this document, countries are identified in accordance with their distinguishing signs for motor
vehicles according to the Vienna Convention on Road Traffic, which is also the basis for marking of
cylinders according to the ADR (see Annex A to the ADR, 6.2.2.7) as follows:
A Austria FIN Finland NL Netherlands
B Belgium GB United Kingdom P Portugal
BG Bulgaria GR Greece PL Poland
CH Switzerland H Hungary RO Romania
CZ Czech Republic HR Croatia S Sweden
D Germany I Italy SK Slovakia
DK Denmark IRL Ireland SLO Slovenia
E Spain L Luxembourg
F France N Norway
6 Overview (in alphabetic order) of porous materials for which data were
available and could be checked
6.1 Single cylinders and bundles with TPED evaluation of conformity
Table 1 provides the list of porous materials for single cylinders and bundles in this Technical Report
with TPED evaluation of conformity given in this Technical Report, and cross-references to the
respective data tables in Clause 7.
Table 1 — List of porous materials for single cylinders and bundles with TPED evaluation of
conformity
Porous material (trading name) Solvent Data
A-10W ECO Acetone and solvent free Table 4
A-10W ECO DMF DMF Table 5
BAF1 Acetone Table 6
NORAL 2 Acetone Table 7
SIAD AF Acetone Table 8
DMF Table 9
UL 1 Acetone Table 10
Solvent free Table 11
UL 2 DMF Table 12
Technogas AF Acetone Table 13
W-ECO-A Acetone and solvent free Table 14
W-ECO-A DMF DMF Table 15
6.2 Cylinders and/or bundles with reassessment to TPED
Table 2 provides the overview list of porous materials for cylinders and/or bundles with reassessment
to TPED in this Technical Report, and cross-references to the respective data tables in Clause 8.
Table 2 — List of porous materials for cylinders and/or bundles with reassessment to TPED
Porous material Solvent Cylinder and/or Data
(trading name) bundle
AL 4 Acetone Cylinder and bundle Table 16
DMF Cylinder and bundle Table 17
NORAL Acetone Cylinder and bundle Table 18
6.3 Single cylinders and bundles that are type approved based on national regulations
Table 3 provides the overview list of porous materials for single cylinders and bundles that are type
approved based on national regulations in this document, and cross-references to the respective data
tables in Clause 9.
Table 3 — List of porous materials for cylinders and bundles that are type approved based on
national regulations
Porous material (trading name) Solvent Data
AGA 2 Acetone Table 19
AGA 2/2 DMF Table 20
AGA 4 Acetone Table 21
Solvent free Table 22
AGA H Acetone Table 23
AL 4 Acetone Table 24
BOC 1 Acetone Table 25
Heiser-DMF DMF Table 26
Heiser ECO Acetone Table 27
Heiser ECO DMF DMF Table 28
Heiser ECO Solvent free Table 29
JH-Coyne Acetone Table 30
Linde M 1 Acetone Table 31
Linde M 2 DMF Table 32
NA Acetone Table 33
NLH Acetone Table 34
NORAL Acetone Table 35
POR 92 Acetone Table 36
SIAD 2 Acetone Table 37
DMF Table 38
SIAD 3 DMF Table 39
SIAD AF Acetone Table 40
T-200A Acetone Table 41
7 Data for porous materials for acetylene cylinders approved to TPED
evaluation of conformity at time of manufacture
Clause 7 contains information on porous materials for pi-marked acetylene cylinders which were
placed or still are on the market. Such porous materials are type tested in most cases according to
EN ISO 3807, EN 1800 or ISO 3807-1. It also contains information on filling conditions for acetylene
cylinder bundles in accordance with EN 12755 or EN ISO 13088:2012.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.