CEN/TR 14473:2014
(Main)Transportable gas cylinders - Porous materials for acetylene cylinders
Transportable gas cylinders - Porous materials for acetylene cylinders
This Technical Report contains information about monolithic porous materials used in individual acetylene cylinders and in acetylene cylinder bundles. It does not claim to be exhaustive.
Ortsbewegliche Gasflaschen - Poröse Materialien für Acetylenflaschen
Dieser Technische Bericht enthält Daten und Angaben zu monolithischen porösen Materialien für Acetylen-flaschen und Acetylenflaschenbündel. Er erhebt keinen Anspruch auf Vollständigkeit.
Bouteilles à gaz transportables - Matières poreuses pour bouteilles à acétylène
Premične plinske jeklenke - Porozne mase za jeklenke za acetilen
CEN/TR 14473 vsebuje informacije o monolitnih poroznih masah za posamezno jeklenko za acetilen in za snope jeklenk za acetilen. Standard ni dokončen.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
kSIST-TP FprCEN/TR 14473:2013
01-november-2013
3UHPLþQHSOLQVNHMHNOHQNH3RUR]QHPDVH]DMHNOHQNH]DDFHWLOHQ
Transportable gas cylinders - Porous materials for acetylene cylinders
Ortsbewegliche Gasflaschen - Poröse Materialien für Acetylenflaschen
Bouteilles à gaz transportables - Matières poreuses pour bouteilles à acétylène
Ta slovenski standard je istoveten z: FprCEN/TR 14473
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
kSIST-TP FprCEN/TR 14473:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
kSIST-TP FprCEN/TR 14473:2013
kSIST-TP FprCEN/TR 14473:2013
TECHNICAL REPORT
FINAL DRAFT
FprCEN/TR 14473
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
September 2013
ICS 23.020.30 Will supersede CR 14473:2002
English Version
Transportable gas cylinders - Porous materials for acetylene
cylinders
Bouteilles à gaz transportables - Matières poreuses pour Ortsbewegliche Gasflaschen - Poröse Materialien für
bouteilles à acétylène Acetylenflaschen
This draft Technical Report is submitted to CEN members for Technical Committee Approval. It has been drawn up by the Technical
Committee CEN/TC 23.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a Technical Report. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a Technical Report.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TR 14473:2013: E
worldwide for CEN national Members.
kSIST-TP FprCEN/TR 14473:2013
FprCEN/TR 14473:2013 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Source and nature of the data about the listed porous materials .5
3 Country codes .5
4 Data for porous materials for individual acetylene cylinders type tested in accordance
with EN 1800 or ISO 3807-1 .6
5 Data for porous materials for individual acetylene cylinders and that are type approved
based on national regulations . 10
6 Data for porous materials for acetylene cylinders used in bundles and that are type
approved according to national regulations . 17
Bibliography . 24
kSIST-TP FprCEN/TR 14473:2013
FprCEN/TR 14473:2013 (E)
Foreword
This document (FprCEN/TR 14473:2013) has been prepared by Technical Committee CEN/TC 23
“Transportable gas cylinders”, the secretariat of which is held by BSI.
This document is currently submitted to the Technical Committee Approval.
This document will supersede CR 14473:2002.
This second edition supersedes the first edition (CR 14473:2002) with the following main technical revisions:
a) changes in the legal background are taken into account by introducing new tables for porous materials
with filling conditions based on new European and International standards (EN 1800 and ISO 3807-1 for
type testing of porous materials for acetylene cylinders);
b) entries for porous materials that are no longer used or for which the filling conditions could not be verified
were deleted;
c) the report was amended with regard to porous materials which have been newly placed on the market
since the last edition of this report.
For amendments or changes to this report, an application shall be made to the CEN/TC 23 Secretariat with a
copy of the documentation based on which the acetylene cylinders are placed on the market (type approval by
the competent authority or conformity assessment in accordance with Directive 2010/35/EU (TPED)).
kSIST-TP FprCEN/TR 14473:2013
FprCEN/TR 14473:2013 (E)
Introduction
This report contains data and information about monolithic porous materials for acetylene cylinders.
This report does not contain information about non-monolithic porous materials.
Where there is any conflict between this European Technical Report and any applicable regulation, the
regulation always takes precedence.
In International Standards, weight is equivalent to a force, expressed in Newton. However, in common par-
lance the word “weight” continues to be used to mean “mass”, but this practice is deprecated (ISO 80000-4).
In this European Technical Report the unit bar is used, due to its universal use in the field of technical gases.
It should, however, be noted that bar is not an SI unit, and that the according SI unit for pressure is Pa.
Pressure values given in this International standard are given as gauge pressure (pressure exceeding
atmospheric pressure) unless noted otherwise.
kSIST-TP FprCEN/TR 14473:2013
FprCEN/TR 14473:2013 (E)
1 Scope
This Technical Report contains information about monolithic porous materials used in individual acetylene
cylinders and in acetylene cylinder bundles. It does not claim to be exhaustive.
2 Source and nature of the data about the listed porous materials
The data contained in the tables in Clauses 4, 5 and 6 are derived from the documentation based on which
the acetylene cylinders were or still are placed on the market (type approval by the competent authority or
conformity assessment in accordance with TPED) and according to which they are operated (in some cases a
type approval with regard to newly manufacturing a porous material has been withdrawn or a TPED-certificate
is no longer valid but the cylinders that were already on the market still may be used).
NOTE The documentation provided was examined carefully before including the according information into this
Report. Nevertheless, there might be discrepancies to the actual approval, e.g. because more recent amendments exist
which were not made available at the time of preparing this Report. In some cases not all information was available in the
documents provided and consequently the according information is missing (for example the maximum top clearance or
the working pressure).
Acetylene cylinders that were reassessed in accordance with TPED may be filled with the filling values
conforming to the reassessment certificate throughout the EU. It should be noted that these values might
deviate from those of prior national approvals which still apply to those cylinders that were not reassessed
according to TPED.
If no reliable documentation could be made available to the working group, no information is included in this
Report. However, this does not necessarily mean that no approval or certification exists.
Clause 4 contains information on porous materials for acetylene cylinders which are placed on the market in
accordance with type tests according to EN 1800 or ISO 3807-1. It also contains information on filling
conditions for acetylene cylinder bundles in accordance with EN 12755 or EN ISO 13088, respectively.
Clause 5 contains information on porous materials used in individual acetylene cylinders that were type
approved based on national regulations and/or standards.
Clause 6 contains information on porous materials used in acetylene cylinder bundles that were approved
based on national regulations and/or standards.
If several years are indicated for the approval or certification they refer to according amendments in addition.
3 Country codes
In this Technical Report countries are identified in accordance with their distinguishing signs for motor vehicles
according to the Vienna Convention on Road Traffic which is also the basis for marking of cylinders according
to the ADR (see Annex A to the ADR, 6.2.2.7) as follows:
A Austria F France L Luxembourg
B Belgium GB United Kingdom NL Netherlands
CH Switzerland GR Greece N Norway
CZ Czech Republic HR Croatia P Portugal
D Germany HU Hungary S Sweden
DK Denmark IRL Ireland SK Slovakia
E Spain I Italy
FIN Finland IS Iceland
kSIST-TP FprCEN/TR 14473:2013
FprCEN/TR 14473:2013 (E)
4 Data for porous materials for individual acetylene cylinders type tested in
accordance with EN 1800 or ISO 3807-1
Clause 4 contains information on porous materials for acetylene cylinders which were or still are placed on the
market in accordance with type testing according to EN 1800 or ISO 3807-1, respectively. It also contains
information on filling conditions for acetylene cylinder bundles in accordance with EN 12755 or EN ISO 13088,
respectively.
The following tables are ordered alphabetically according to the name of the porous material. Within these
tables the countries are ranked alphabetically according to the country codes as given in Clause 3.
Column 1 gives the cylinder water capacities, in l, to which the filling conditions (solvent content, acetylene
content, working pressure) as given in the subsequent columns are applicable.
Column 2 lists the specified solvent content, in kg/l, that the acetylene cylinder shall contain per litre water
capacity in accordance with the type tests according to EN 1800 or ISO 3807-1.
Column 3 lists the maximum acetylene content (including saturation gas), in kg/l, that the acetylene cylinder
shall contain per litre water capacity in accordance with the type tests according to EN 1800 or ISO 3807-1.
Column 4 lists the working pressure of the acetylene cylinder as calculated in accordance with EN 1800:2006,
Annex C or ISO 3807-1:2000, Annex E or ISO 3807-2:2000, Annex E. For bundles it gives the maximum no.
of consecutive fillings before the bundle has to be dismantled and solvent has to be replenished in the
individual cylinders.
kSIST-TP FprCEN/TR 14473:2013
FprCEN/TR 14473:2013 (E)
Identification A-10W ECO
Manufacturer Worthington Cylinders GmbH
Beim Flaschenwerk 1, 3291 Kienberg bei Gaming, Austria
Year and no. 2005, 2006
of type approval or EU-Certificate BAM-05-M01
Time of manufacture since 2006
Type of porous material Monolithic, asbestos-free
Density in kg/l 0,270 ± 0,015
Porosity in % 90,5 ± 1,5
Maximum top clearance in mm 2
Solvent Acetone
Individual cylinders with acetone
Cylinder water capacity Solvent content Acetylene content Working pressure
in l in kg/l in kg/l in bar
< 20 0,310 0,180 18
20 to 60 0,310 0,200 19
Individual cylinders without solvent
Cylinder water capacity Solvent content Acetylene content Working pressure
in l in kg/l in kg/l in bar
-
0,020 19
Bundle cylinders based on EN 12755 (or EN ISO 13088)
Cylinder water capacity Solvent content Acetylene content Maximum no. of
consecutive fillings
in l in kg/l in kg/l
20 to 60 0,289 to 0,331 0,180 6
kSIST-TP FprCEN/TR 14473:2013
FprCEN/TR 14473:2013 (E)
Identification A-10W ECO DMF
Manufacturer Worthington Cylinders GmbH
Beim Flaschenwerk 1, 3291 Kienberg bei Gaming, Austria
Year and no. 2005, 2006, 2009
of type approval or EU-Certificate BAM-05-M02
Time of manufacture since 2006
Type of porous material Monolithic, asbestos-free
Density in kg/l 0,270 ± 0,015
Porosity in % 90,5 ± 1,5
Maximum top clearance in mm 2
Solvent DMF
Individual cylinders with DMF
Cylinder water capacity Solvent content Acetylene content Working pressure
in l in kg/l in kg/l in bar
40 to 60 0,400 0,209 18
Bundle cylinders based on EN 12755 (or EN ISO 13088)
Cylinder water capacity Solvent content Acetylene content Maximum no. of
consecutive fillings
in l in kg/l in kg/l
40 to 60 0,385 to 0,410 0,189 100
kSIST-TP FprCEN/TR 14473:2013
FprCEN/TR 14473:2013 (E)
Identification UL 1
Manufacturer Linde Vitkovice a.s.
Hrbovická 155, 400 01 Ústí nad Labem, Czech Republic
Year and no. 2012 (valid until 2022)
of type approval or EU-Certificate 05.64.115
Time of manufacture since 1997
Type of porous material Monolithic, asbestos-free
Density in kg/l 0,264 ± 0,010
Porosity in % 90,0 ± 1,5
Maximum top clearance in mm 3
Solvent Acetone
Individual cylinders with acetone
Cylinder water capacity Solvent content Acetylene content Working pressure
in l in kg/l in kg/l in bar
< 20 0,3125 0,180 18
20 to 55,5 0,3125 0,200 19
Individual cylinders without solvent
Cylinder water capacity Solvent content Acetylene content Working pressure
in l in kg/l in kg/l in bar
–
50, 55 0,020 19
Bundle cylinders based on EN 12755 (or EN ISO 13088)
Cylinder water capacity Solvent content Acetylene content Maximum no. of
consecutive fillings
in l in kg/l in kg/l
20 to 55,5 0,2914 to 0,333 0,180 6
kSIST-TP FprCEN/TR 14473:2013
FprCEN/TR 14473:2013 (E)
Identification UL 2
Manufacturer Linde Vitkovice a.s.
Hrbovická 155/147, 400 01 Ústí nad Labem, Czech Republic
Year and no. 2010
of type approval or EU-Certificate BAM-TPED-2007/002
Time of manufacture
Type of porous material
...
SLOVENSKI STANDARD
01-julij-2014
1DGRPHãþD
SIST CR 14473:2002
3UHPLþQHSOLQVNHMHNOHQNH3RUR]QHPDVH]DMHNOHQNH]DDFHWLOHQ
Transportable gas cylinders - Porous materials for acetylene cylinders
Ortsbewegliche Gasflaschen - Poröse Materialien für Acetylenflaschen
Bouteilles à gaz transportables - Matières poreuses pour bouteilles à acétylène
Ta slovenski standard je istoveten z: CEN/TR 14473:2014
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
TECHNICAL REPORT
CEN/TR 14473
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
March 2014
ICS 23.020.30 Supersedes CR 14473:2002
English Version
Transportable gas cylinders - Porous materials for acetylene
cylinders
Bouteilles à gaz transportables - Matières poreuses pour Ortsbewegliche Gasflaschen - Poröse Materialien für
bouteilles à acétylène Acetylenflaschen
This Technical Report was approved by CEN on 6 January 2014. It has been drawn up by the Technical Committee CEN/TC 23.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 14473:2014 E
worldwide for CEN national Members.
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Source and nature of the data about the listed porous materials .5
3 Country codes .5
4 Data for porous materials for individual acetylene cylinders type tested in accordance
with EN ISO 3807.6
5 Data for porous materials for individual acetylene cylinders and that are type approved
based on national regulations . 10
6 Data for porous materials for acetylene cylinders used in bundles and that are type
approved according to national regulations . 18
Bibliography . 25
Foreword
This document (CEN/TR 14473:2014) has been prepared by Technical Committee CEN/TC 23 “Transportable
gas cylinders”, the secretariat of which is held by BSI.
This document supersedes CR 14473:2002.
This second edition supersedes the first edition (CR 14473:2002) with the following main technical revisions:
a) changes in the legal background are taken into account by introducing new tables for porous materials
with filling conditions based on a new European standard (EN ISO 3807) for type testing of porous
materials for acetylene cylinders);
b) entries for porous materials that are no longer used or for which the filling conditions could not be verified
were deleted;
c) the report was amended with regard to porous materials which have been newly placed on the market
since the last edition of this report.
For amendments or changes to this report, an application shall be made to the CEN/TC 23 Secretariat with a
copy of the documentation based on which the acetylene cylinders are placed on the market (type approval by
the competent authority or conformity assessment in accordance with Directive 2010/35/EU (TPED)).
Introduction
This report contains data and information about monolithic porous materials for acetylene cylinders.
This report does not contain information about non-monolithic porous materials.
Where there is any conflict between this European Technical Report and any applicable regulation, the
regulation always takes precedence.
In International Standards, weight is equivalent to a force, expressed in Newton. However, in common
parlance the word “weight” continues to be used to mean “mass”, but this practice is deprecated
(ISO 80000-4).
In this European Technical Report the unit bar is used, due to its universal use in the field of technical gases.
It should, however, be noted that bar is not an SI unit, and that the according SI unit for pressure is Pa.
Pressure values given in this European Technical Report are given as gauge pressure (pressure exceeding
atmospheric pressure) unless noted otherwise.
1 Scope
This Technical Report contains information about monolithic porous materials used in individual acetylene
cylinders and in acetylene cylinder bundles. It does not claim to be exhaustive.
2 Source and nature of the data about the listed porous materials
The data contained in the tables in Clauses 4, 5 and 6 are derived from the documentation based on which
the acetylene cylinders were or still are placed on the market (type approval by the competent authority or
conformity assessment in accordance with TPED) and according to which they are operated (in some cases a
type approval with regard to newly manufacturing a porous material has been withdrawn or a TPED-certificate
is no longer valid but the cylinders that were already on the market still may be used).
NOTE The documentation provided was examined carefully before including the according information into this
Report. Nevertheless, there might be discrepancies to the actual approval, e.g. because more recent amendments exist
which were not made available at the time of preparing this Report. In some cases not all information was available in the
documents provided and consequently the according information is missing (for example the maximum top clearance or
the working pressure).
Acetylene cylinders that were reassessed in accordance with TPED may be filled with the filling values
conforming to the reassessment certificate throughout the EU. It should be noted that these values might
deviate from those of prior national approvals which still apply to those cylinders that were not reassessed
according to TPED.
If no reliable documentation could be made available to the working group, no information is included in this
Report. However, this does not necessarily mean that no approval or certification exists.
Clause 4 contains information on porous materials for acetylene cylinders which are placed on the market in
accordance with type tests according to EN ISO 3807. It also contains information on filling conditions for
acetylene cylinder bundles in accordance with EN ISO 13088.
Clause 5 contains information on porous materials used in individual acetylene cylinders that were type
approved based on national regulations and/or standards.
Clause 6 contains information on porous materials used in acetylene cylinder bundles that were approved
based on national regulations and/or standards.
If several years are indicated for the approval or certification they refer to according amendments in addition.
3 Country codes
In this Technical Report countries are identified in accordance with their distinguishing signs for motor vehicles
according to the Vienna Convention on Road Traffic which is also the basis for marking of cylinders according
to the ADR (see Annex A to the ADR, 6.2.2.7) as follows:
A Austria F France L Luxembourg
B Belgium GB United Kingdom NL Netherlands
CH Switzerland GR Greece N Norway
CZ Czech Republic HR Croatia P Portugal
D Germany HU Hungary S Sweden
DK Denmark IRL Ireland SK Slovakia
E Spain I Italy
FIN Finland IS Iceland
4 Data for porous materials for individual acetylene cylinders type tested in
accordance with EN ISO 3807
Clause 4 contains information on porous materials for acetylene cylinders which were or still are placed on the
market in accordance with type testing according to EN ISO 3807. It also contains information on filling
conditions for acetylene cylinder bundles in accordance with EN ISO 13088.
The following tables are ordered alphabetically according to the name of the porous material.
Column 1 gives the cylinder water capacities, in l, to which the filling conditions (solvent content, acetylene
content, working pressure) as given in the subsequent columns are applicable.
Column 2 lists the specified solvent content, in kg/l, that the acetylene cylinder shall contain per litre water
capacity in accordance with the type tests according to EN ISO 3807.
Column 3 lists the maximum acetylene content (including saturation acetylene), in kg/l, that the acetylene
cylinder shall contain per litre water capacity in accordance with the type tests according to EN ISO 3807.
Column 4 lists the working pressure of the acetylene cylinder as calculated in accordance with EN ISO 3807.
For bundles it gives the maximum no. of consecutive fillings before the bundle has to be dismantled and
solvent has to be replenished in the individual cylinders.
Identification A-10W ECO
Manufacturer Worthington Cylinders GmbH
Beim Flaschenwerk 1, 3291 Kienberg bei Gaming, Austria
Year and no. 2005, 2006
of type approval or EU- BAM-05-M01
Certificate
Time of manufacture since 2006
Type of porous material Monolithic, asbestos-free
Density in kg/l 0,270 ± 0,015
Porosity in % 90,5 ± 1,5
Maximum top clearance in mm 2
Solvent Acetone
Individual cylinders with acetone
Cylinder water capacity Solvent content Acetylene content Working pressure
in l in kg/l in kg/l in bar
< 20 0,310 0,180 18
20 to 60 0,310 0,200 19
Individual cylinders without solvent
Cylinder water capacity Solvent content Acetylene content Working pressure
in l in kg/l in kg/l in bar
- 0,020 19
Bundle cylinders based on EN ISO 13088
Cylinder water capacity Solvent content Acetylene content Maximum no. of
consecutive fillings
in l in kg/l in kg/l
20 to 60 0,289 to 0,331 0,180 6
Identification A-10W ECO DMF
Manufacturer Worthington Cylinders GmbH
Beim Flaschenwerk 1, 3291 Kienberg bei Gaming, Austria
Year and no. 2005, 2006, 2009
of type approval or EU- BAM-05-M02
Certificate
Time of manufacture since 2006
Type of porous material Monolithic, asbestos-free
Density in kg/l 0,270 ± 0,015
Porosity in % 90,5 ± 1,5
Maximum top clearance in mm 2
Solvent DMF
Individual cylinders with DMF
Cylinder water capacity Solvent content Acetylene content Working pressure
in l in kg/l in kg/l in bar
40 to 60 0,400 0,209 18
Bundle cylinders based on EN ISO 13088
Cylinder water capacity Solvent content Acetylene content Maximum no. of
consecutive fillings
in l in kg/l in kg/l
40 to 60 0,385 to 0,410 0,189 100
Identification UL 1
Manufacturer Linde Vitkovice a.s.
Hrbovická 155, 400 01 Ústí nad Labem, Czech Republic
Year and no. 2012 (valid until 2022)
of type approval or EU- 05.624.115
Certificate
Time of manufacture since 1997
Type of porous material Monolithic, asbestos-free
Density in kg/l 0,264 ± 0,010
Porosity in % 90,0 ± 1,5
Maximum top clearance in mm 3
Solvent Acetone
Individual cylinders with acetone
Cylinder water capacity Solvent content Acetylene content Working pressure
in l in kg/l in kg/l in bar
< 20 0,3125 0,180 18
20 to 55,5 0,3125 0,200 19
Individual cylinders without solvent
Cylinder water capacity Solvent content Acetylene content Working pressure
in l in kg/l in kg/l in bar
50, 55 – 0,020 19
Bundle cylinders based on EN ISO 13088
Cylinder water capacity Solvent content Acetylene content Maximum no. of
consecutive fillings
in l in kg/l in kg/l
20 to 55,5 0,2914 to 0,333 0,180 6
Identification UL 2
Manufacturer Linde Vitkovice a.s.
Hrbovická 155/147, 400 01 Ústí nad Labem, Czech Republic
Year and no. 2010
of type approval or EU- BAM-TPED-2007/002
Certificate
Time of manufacture
Type of porous material Monolithic, asbestos-free
Density in kg/l 0,264 ± 0,010
Porosity in % 90,0 ± 1,5
Maximum top clearance in mm 3
Solvent DMF
Individual cylinders with DMF
Cylinder water capacity Solvent content Acetylene content Working pressure
in l in kg/l in kg/l in bar
< 20 0,400 0,180 16
20 to ≤ 55,5 0,400 0,200 17
Bundle cylinders based on EN ISO 13088
Cylinder water capacity Solvent content Acetylene content Maximum no. of
consecutive fillings
in l in kg/l in kg/l
0,385 to 0,408 0,180 92
5 Data for porous materials for individual acetylene cylinders and that are type
approved based on national regulations
Clause 5 contains information on porous materials for individual acetylene cylinders which were type
approved based on national regulations and/or standards.
The following tables are ordered alphabetically according to the name of the poro
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.