EN ISO 10360-6:2001/AC:2008

Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001/Cor 1:2007)

Specifies a method for testing software used for computing associated features from coordinate measurements. The features of concern are the line (in two and three dimensions), the plane, the circle (in two and three dimensions), the sphere, the cylinder, the cone and the torus. The test defined here is concerned with assessing the correctness of the parameters of the computed associated feature. It is intended for software designed for Gaussian (least-squares) assessment of data measured by a coordinate measuring machine (CMM) or another coordinate measuring system. One or more separate tests are required for each feature that is claimed to be covered by the software. The test is of the software alone and therefore independent of the coordinate measuring system. Is concerned with complete features and non-extremely partial features; however, the tests for complete and for partial features are separated, and software may be submitted for either or both tests.

Geometrische Produktspezifikation (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmessgeräte (KMG) - Teil 6: Abweichungsabschätzung beim Berechnen zugeordneter Geometrieelemente nach Gauß (ISO 10360-6:2001/Cor 1:2007)

Spécification géométrique des produits (GPS) - Essai de réception et de vérification périodique des machines à mesurer tridimensionnelles (MMT) - Partie 6: Estimation des erreurs dans le calcul des éléments associés Gaussiens (ISO 10360-6:2001/Cor 1:2007)

Specifikacija geometrijskih veličin izdelka - Preskusi za sprejemljivost in ponovno overjanje koordinatnih merilnih strojev (KMS) - 6. del: Ocena napak pri računanju značilnosti Gaussove porazdelitve (ISO 10360-6:2001/Cor 1:2007)

General Information

• Status: Published
• Publication Date: 16-Sep-2008
• ICS: 17.040.30 - Measuring instruments
• Technical Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Drafting Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 17-Sep-2008
• Completion Date: 17-Sep-2008
• Ref Project: SIST EN ISO 10360-6:2004/AC:2008 - Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001/Cor 1:2007)

Relations

• Corrects: EN ISO 10360-6:2001 - Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geometrische Produktspezifikation (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmessgeräte (KMG) - Teil 6: Abweichungsabschätzung beim Berechnen zugeordneter Geometrieelemente nach Gauß (ISO 10360-6:2001/Cor 1:2007)Spécification géométrique des produits (GPS) - Essai de réception et de vérification périodique des machines à mesurer tridimensionnelles (MMT) - Partie 6: Estimation des erreurs dans le calcul des éléments associés Gaussiens (ISO 10360-6:2001/Cor 1:2007)Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001/Cor 1:2007)17.040.40Geometrical Product Specification (GPS)17.040.30MerilaMeasuring instrumentsICS:Ta slovenski standard je istoveten z:EN ISO 10360-6:2001/AC:2008SIST EN ISO 10360-6:2004/AC:2008en,fr,de01-december-2008SIST EN ISO 10360-6:2004/AC:2008SLOVENSKI
STANDARD



SIST EN ISO 10360-6:2004/AC:2008



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 10360-6:2001/ACSeptember 2008Septembre 2008September 2008ICS 17.040.30English versionVersion FrançaiseDeutsche FassungGeometrical Product Specifications (GPS) - Acceptance and reverificationtests for coordinate measuring machines (CMM) - Part 6: Estimation oferrors in computing Gaussian associated features (ISO 10360-6:2001/Cor1:2007)Spécification géométrique des produits(GPS) - Essai de réception et devérification périodique des machines àmesurer tridimensionnelles (MMT) - Partie6: Estimation des erreurs dans le calcul deséléments associés Gaussiens (ISO 10360-6:2001/Cor 1:2007)Geometrische Produktspezifikation (GPS) -Annahmeprüfung und Bestätigungsprüfungfür Koordinatenmessgeräte (KMG) - Teil 6:Abweichungsabschätzung beim Berechnenzugeordneter Geometrieelemente nachGauß (ISO 10360-6:2001/Cor 1:2007)This corrigendum becomes effective on 17 September 2008 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 17 septembre 2008 pour incorporation dans les trois versionslinguistiques officielles de la EN.Die Berichtigung tritt am 17.September 2008 zur Einarbeitung in die drei offiziellen Sprachfassungender EN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedernvon CEN vorbehalten.Ref. No.:EN ISO 10360-6:2001/AC:2008 D/E/FSIST EN ISO 10360-6:2004/AC:2008



EN IS
...