EN 3686:2008

Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1 100 MPa/650 °C

This standard specifies the characteristics of double hexagon head bolts with relieved shank and long thread, in heat resisting steel FE-PA92HT, silver plated, tensile strength class 1 100 MPa at room temperature. The maximum test temperature of the material is 650 °C.
These bolts are to be used in aerospace fastening systems mainly stressed in tension.

Luft- und Raumfahrt - Zwölfkantschrauben, Dünnschaft, langes Gewinde, aus hochwarmfestem Stahl FE-PA92HT (A286), versilbert - Klasse: 1 100 MPa/650 °C

Diese Norm legt die Eigenschaften von Zwölfkantschrauben mit Dünnschaft und langem Gewinde aus hochwarmfesten Stahl FE PA92HT, versilbert, Zugfestigkeitsklasse 1 100 MPa bei Raumtemperatur fest. Die maximale Prüftemperatur der Teile beträgt 650 °C.
Diese Schrauben sind in Verbindungssystemen der Luft- und Raumfahrt zu verwenden, die hauptsächlich auf Scherkraft beansprucht werden.

Série aérospatiale - Vis à tête bihexagonale, à tige réduite, filetage long, en acier résistant à chaud FE-PA92HT (A286), argentées - Classification: 1 100 MPa/650 °C

Aeronavtika - Sorniki, dvojna šestroba glava, tanko steblo, dolg navoj, iz toplotnoodpornega jekla FE-PA92HT (A286), posrebreni - Klasifikacija: 1 100 MPa/650 °C

General Information

• Status: Published
• Publication Date: 27-May-2008
• Withdrawal Date: 29-Nov-2008
• ICS: 49.030.20 - Bolts, screws, studs
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 28-May-2008
• Completion Date: 28-May-2008
• Ref Project: SIST EN 3686:2008 - Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1 100 MPa/650 °C

Relations

• Corrected By: EN 3686:2008/AC:2009 - Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1 100 MPa/650 °C
• Effective Date: 23-Mar-2009

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3686:2008
01-september-2008
Aeronavtika - Sorniki, dvojna šestroba glava, tanko steblo, dolg navoj, iz
toplotnoodpornega jekla FE-PA92HT (A286), posrebreni - Klasifikacija: 1 100
MPa/650 °C
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat
resisting steel FE-PA92HT (A286), silver plated - Classification: 1 100 MPa/650 °C
Luft- und Raumfahrt - Zwölfkantschrauben, Dünnschaft, langes Gewinde, aus
hochwarmfestem Stahl FE-PA92HT (A286), versilbert - Klasse: 1 100 MPa/650 °C
Série aérospatiale - Vis à tête bihexagonale, à tige réduite, filetage long, en acier
résistant à chaud FE-PA92HT (A286), argentées - Classification: 1 100 MPa/650 °C
Ta slovenski standard je istoveten z: EN 3686:2008
ICS:
49.030.20 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN 3686:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 3686

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2008
ICS 49.030.20
English Version
Aerospace series - Bolts, double hexagon head, relieved shank,
long thread, in heat resisting steel FE-PA92HT (A286), silver
plated - Classification: 1 100 MPa/650 °C
Série aérospatiale - Vis à tête bihexagonale, à tige réduite, Luft- und Raumfahrt - Zwölfkantschrauben, Dünnschaft,
filetage long, en acier résistant à chaud FE-PA92HT langes Gewinde, aus hochwarmfestem Stahl FE-PA92HT
(A286), argentées - Classification: 1 100 MPa/650 °C (A286), versilbert - Klasse: 1 100 MPa/650 °C
This European Standard was approved by CEN on 21 December 2007.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3686:2008: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 3686:2008 (E)
Contents Page
Foreword.3
1 Scope.4
2 Normative references.4
3 Required characteristics.4
3.1 Configuration, dimensions, tolerances, masses.4
3.2 Surface roughness.4
3.3 Material.4
3.4 Surface treatment.5
4 Designation.8
5 Marking.8
6 Technical specification.8

Figures
Figure 1 — Bolt . 5

Tables
Table 1 — Di
...