EN 13848-1:2003+A1:2008
(Main)Railway applications - Track - Track geometry quality - Part 1: Characterisation of track geometry
Railway applications - Track - Track geometry quality - Part 1: Characterisation of track geometry
This European Standard specifies the requirements for the homologation of track geometry quality parameters as measured by various measuring devices fitted on track recording vehicles. These measuring devices are described in Part 2 of the standard. This European Standard applies to all track geometry parameters including track gauge, longitudinal level, alignment, cross level (cant / superelevation) and twist. It defines each parameter and specifies the requirements for measurement, the analysis methods and the presentation of results. Parts 3 and 4 give a description of measuring devices complying partially with this Part 1 according to the specificities of respectively track construction and maintenance machines, and manual and lightweight devices.
Bahnanwendungen - Oberbau - Gleislagequalität - Teil 1: Beschreibung der Gleisgeometrie
Applications ferroviaires - Voie - Qualité géométrique de la voie - Partie 1: Caractérisation de la géométrie de voie
!Cette Norme européenne spécifie les exigences pour l’homologation des paramètres de qualité géométrique de
la voie tels qu’ils sont mesurés par divers systèmes de mesure fixés sur les véhicules d’enregistrement de la voie."
Ces systèmes de mesure sont décrits dans la !Partie 2" de la norme. La présente Norme européenne s’applique
à tous les paramètres de géométrie de la voie, y compris l’écartement de la voie, le nivellement longitudinal,
le dressage, le dévers et le gauche. Elle définit chaque paramètre et spécifie les exigences pour la mesure,
les méthodes d’analyse, et la présentation des résultats. !Les Parties 3 et 4 donnent une description des systèmes
de mesure satisfaisant partiellement à la présente Partie 1 de la norme, par rapport aux spécificités des engins
de travaux et de maintenance de la voie, ainsi qu’aux spécificités des dispositifs manuels et de faible poids."
Železniške naprave - Zgornji ustroj - Kakovost tirne geometrije - 1. del: Karakteristike tirne geometrije
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Železniške naprave - Zgornji ustroj - Kakovost tirne geometrije - 1. del: Karakteristike tirne geometrijeBahnanwendungen - Oberbau - Gleislagequalität - Teil 1: Beschreibung der GleisgeometrieApplications ferroviaires - Voie - Qualité géométrique de la voie - Partie 1: Caractérisation de la géométrie de voieRailway applications - Track - Track geometry quality - Part 1: Characterisation of track geometry93.100Gradnja železnicConstruction of railways45.080Rails and railway componentsICS:Ta slovenski standard je istoveten z:EN 13848-1:2003+A1:2008SIST EN 13848-1:2004+A1:2008en01-september-2008SIST EN 13848-1:2004+A1:2008SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13848-1:2003+A1
July 2008 ICS 93.100 Supersedes EN 13848-1:2003English Version
Railway applications - Track - Track geometry quality - Part 1: Characterisation of track geometry
Applications ferroviaires - Voie - Qualité géométrique de la voie - Partie 1: Caractérisation de la géométrie de voie
Bahnanwendungen - Oberbau - Gleislagequalität - Teil 1: Beschreibung der Gleisgeometrie This European Standard was approved by CEN on 26 June 2003 and includes Amendment 1 approved by CEN on 6 June 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13848-1:2003+A1:2008: ESIST EN 13848-1:2004+A1:2008
Measurement of acceleration.20 A.1 Introduction.20 A.2 Measurement method.20 A.3 Frequency range.20 A.4 Range of measurement.20 A.5 Sampling frequency.21 A.6 Measurement conditions.21 A.7 Analysis method.21 A.8 Output requirements.21 A.9 Output presentation.21 Annex B (informative)
Other Parameters.22 Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or other provisions of EU Directives.24
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.