EN 2267-010:2005

Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 010: DR family, single UV laser printable - Product standard

This standard specifies the characteristics of UV laser printable electrical lightweight cables DR family for use in the on-board electrical systems of aircraft at operating temperatures between - 55 °C and 260 °C. Nevertheless, if needed, - 65 °C is also acceptable as shown by cold test.
It shall also be possible to mark these cables by qualified compatible marking. These markings shall satisfy the requirements of EN 3838.

Luft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 260 °C - Teil 010: DR-Familie, einadrige Leitungen UV-Laser bedruckbar - Produktnorm

Diese Norm legt die Eigenschaften von UV Laser-bedruckbaren, leichten elektrischen Leitungen der DR Familie zur Verwendung in Bordnetzen von Luftfahrzeugen bei Betriebstemperaturen zwischen - 55 °C und 260 °C fest. Es können aber auch, falls erforderlich, - 65 °C verwendet werden, wie die Kälteprüfung zeigt.
Es muss auch möglich sein, diese Leitungen mit einer qualifizierten, verträglichen Kennzeichnung zu versehen. Diese Kennzeichnungen müssen die Anforderungen von EN 3838 erfüllen.

Série aérospatiale - Câbles, électriques, d'usage général, températures de fonctionnement comprises entre - 55 °C et 260 °C - Partie 010 : Famille DR, fil simple marquable au laser UV - Norme de produit

Aeronavtika – Električni kabli za splošno uporabo – Delovne temperature med –55 °C in 260 °C – 010. del: Družina DR, enožilni kabli z možnostjo UV-laserskega tiskanja – Standard za proizvod

General Information

• Status: Withdrawn
• Publication Date: 15-Nov-2005
• Withdrawal Date: 17-Dec-2013
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 18-Dec-2013
• Completion Date: 18-Dec-2013
• Ref Project: SIST EN 2267-010:2006 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 010: DR family, single UV laser printable - Product standard

Relations

• Replaced By: EN 2267-010:2013 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 010: DR family, single UV laser printable - Product standard
• Effective Date: 03-Jul-2013

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 010: DR family, single UV laser printable - Product standard9ODVHUVNHJDSérie aérospatiale - Câbles, électriques, d'usage général, températures de fonctionnement comprises entre - 55 °C et 260 °C - Partie 010 : Famille DR, fil simple marquable au laser UV - Norme de produitLuft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 260 °C - Teil 010: DR-Familie, einadrige Leitungen UV-Laser bedruckbar - ProduktnormTa slovenski standard je istoveten z:EN 2267-010:2005SIST EN 2267-010:2006en49.060ICS:SLOVENSKI
STANDARDSIST EN 2267-010:200601-julij-2006

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2267-010
November 2005 ICS 49.060 English Version
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 010: DR family, single UV laser printable – Product standard
Série aérospatiale - Câbles, électriques, d'usage général, températures de fonctionnement comprises entre -55 °C et 260 °C - Partie 010 : Famille DR, fil simple marquable au laser UV - Norme de produit
Luft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 260 °C - Teil 010: DR-Familie Einadrige Leitungen UV-laser bedruckbar - Produktnorm This European Standard was approved by CEN on 26 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2267-010:2005: E

Copper or copper alloy conductors for electrical cables
Product standard. EN 2084, Aerospace series
Cables, electric, single-core, general purpose, with conductors in copper or copper alloy
Technical specification. EN 2267-002, Aerospace series
Cables, electr
...