EN 12503-6:2001
(Main)Sports mats - Part 6: Determination of the top friction
Sports mats - Part 6: Determination of the top friction
This European Standard specifies a method of test for the determination of static rotational friction of sports mats types 1 to 8 of prEN 12503-1 and type 12 of prEN 12503-3.
Sportmatten - Teil 6: Bestimmung der Reibungseigenschaften der Oberseite
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Reibungseigenschaften der Oberseite von Sport-matten der Typen 1 bis 8 von EN 12503-1:2001 und des Typs 12 von EN 12503-3:2001 fest.
Tapis de sport - Partie 6: Détermination des caractéristiques antidérapantes de la face supérieure
La présente Norme européenne fixe une méthode d'essai permettant de déterminer les caractéristiques antidérapantes de la face supérieure des tapis de sport des types 1 à 8 conformes à l'EN 12503-1: 2001, et du type 12 conforme à l'EN 12503-3: 2001.
Športne blazine - 6. del: Ugotavljanje trenja na zgornji površini
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Športne blazine - 6. del: Ugotavljanje trenja na zgornji površiniSportmatten - Teil 6: Bestimmung der Reibungseigenschaften der OberseiteTapis de sport - Partie 6: Détermination des caractéristiques antidérapantes de la face supérieureSports mats - Part 6: Determination of the top friction97.220.30Oprema za dvoranske športeIndoor sports equipmentICS:Ta slovenski standard je istoveten z:EN 12503-6:2001SIST EN 12503-6:2002en01-september-2002SIST EN 12503-6:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12503-6April 2001ICS 97.220.30English versionSports mats - Part 6: Determination of the top frictionTapis de sport - Partie 6: Détermination descaractéristiques antidérapantes de la face supérieureSportmatten - Teil 6: Bestimmung derReibungseigenschaften der OberseiteThis European Standard was approved by CEN on 21 January 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12503-6:2001 ESIST EN 12503-6:2002
Page 2EN 12503-6:2001ContentsPageForeword .21
Scope .32
Normative references .33
Principle .34
Apparatus .35
Test piece .56
Conditioning and test temperature .57
Procedure .58
Expression of results .59
Test report .6ForewordThis European Standard has been prepared by Technical Committee CEN/TC 136 "Sports, playground and otherrecreational equipment", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by October 2001, and conflicting national standards shall be withdrawn at the latestby October 2001.This standard EN 12503 "Sports mats" consists of:Part 1:Gymnastic mats, safety requirementsPart 2:Pole vault and high jump mats, safety requirementsPart 3:Judo mats, safety requirementsPart 4:Determination of shock absorptionPart 5:Determination of the base frictionPart 6:Determination of the top frictionPart 7:Determination of static stiffnessAccording to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,Switzerla
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.