EN ISO 13517:2013

Metallic powders - Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2013)

ISO 13517:2013 specifies a method for determining the flow rate of metallic powders, including powders for hardmetals and mixes of metallic powders and organic additives such as lubricants, by means of a calibrated funnel (Gustavsson flowmeter).
The method is applicable only to powders which flow freely through the specified test orifice.

Metallpulver - Ermittlung der Durchflussrate mit Hilfe eines kalibrierten Trichters (Gustavsson flowmeter) (ISO 13517:2013)

Diese Internationale Norm legt ein Verfahren zur Ermittlung der Durchflussrate für Metallpulver einschließlich
Hartmetallpulver und Gemische aus Metallpulvern mit organischen Zusatzstoffen, z. B. Schmiermitteln, mit
Hilfe eines kalibrierten Trichters (Gustavsson flowmeter) fest.
Dieses Verfahren ist nur auf Pulver anwendbar, die frei durch die festgelegte Ausflussöffnung des Prüftrichters
fließen.

Poudres métalliques - Détermination du temps d'écoulement au moyen d'un entonnoir calibré (cône d'écoulement de Gustavsson) (ISO 13517:2013)

l'ISO 13517:2013 spécifie une méthode visant à déterminer le temps d'écoulement des poudres métalliques, y compris les poudres pour métaux-durs et les mélanges de poudres métalliques et d'additifs organiques tels que les lubrifiants, au moyen d'un entonnoir calibré (cône d'écoulement de Gustavsson).
Cette méthode s'applique uniquement aux poudres qui s'écoulent librement par l'orifice d'essai spécifié.

Kovinski prah - Ugotavljanje hitrosti pretoka z uporabo kalibriranega lija (merilnik pretoka po Gustavssonu) (ISO 13517:2013)

General Information

• Status: Withdrawn
• Publication Date: 07-May-2013
• Withdrawal Date: 12-May-2020
• ICS: 77.160 - Powder metallurgy
• Technical Committee: CEN/SS M11 - Powder metallurgy
• Drafting Committee: CEN/SS M11 - Powder metallurgy
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 13-May-2020
• Ref Project: SIST EN ISO 13517:2014 - Metallic powders - Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2013)

Relations

• Replaced By: EN ISO 13517:2020 - Metallic powders - Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2020)
• Effective Date: 20-May-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13517:2014
01-marec-2014
Kovinski prah - Ugotavljanje hitrosti pretoka z uporabo kalibriranega lija (merilnik
pretoka po Gustavssonu) (ISO 13517:2013)
Metallic powders - Determination of flowrate by means of a calibrated funnel
(Gustavsson flowmeter) (ISO 13517:2013)
Metallpulver - Ermittlung der Durchflussrate mit Hilfe eines kalibrierten Trichters
(Gustavsson flowmeter) (ISO 13517:2013)
Poudres métalliques - Détermination du temps d'écoulement au moyen d'un entonnoir
calibré (cône d'écoulement de Gustavsson) (ISO 13517:2013)
Ta slovenski standard je istoveten z: EN ISO 13517:2013
ICS:
77.160 Metalurgija prahov Powder metallurgy
SIST EN ISO 13517:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 13517:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 13517:2014


EUROPEAN STANDARD
EN ISO 13517

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2013
ICS 77.160
English Version
Metallic powders - Determination of flowrate by means of a
calibrated funnel (Gustavsson flowmeter) (ISO 13517:2013)
Poudres métalliques - Détermination du temps Metallpulver - Ermittlung der Durchflussrate mit Hilfe eines
d'écoulement au moyen d'un entonnoir calibré (cône kalibrierten Trichters (Gustavsson flowmeter) (ISO
d'écoulement de Gustavsson) (ISO 13517:2013) 13517:2013)
This European Standard was approved by CEN on 1 March 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13517:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 13517:2014
EN ISO 13517:2013 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 13517:2014
EN ISO 13517:2013 (E)
Foreword
This document (EN ISO 13517:2013) has been prepared by Technical Committee ISO/TC 119 "Powder
metallurgy".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2013, and conflicting national standards shall be withdrawn
at the latest by November 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 13517:2013 has been approved by CEN as EN ISO 13517:2013 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 13517:2014

---------------------- Page: 6 ----------------------

SIST EN ISO 13517:2014
INTERNATIONAL ISO
STANDARD 13517
First edition
2013-05-01
Metallic powders — Determination
of flowrate by means of a calibrated
funnel (Gustavsson flowmeter)
Poudres métalliques — Détermination du temps d’écoulement au
moyen d’un entonnoir calibré (cô
...