iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 500-4:2006/FprA2

(Amendment)

Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines

Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines

This part of EN 500 specifies the safety requirements for compaction machines as defined in Clause 3 and deals with all significant hazards, hazardous situations and events relevant to compaction machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable.
This document specifies additional requirements to and/or exceptions from EN 500-1 "Common requirements".
This part of EN 500 is not applicable for seated ride-on operated rollers with a drum width less than nominal  0,8 m.

Bewegliche Straßenbaumaschinen - Sicherheit - Teil 4: Besondere Anforderungen an Verdichtungsmaschinen

Machines mobiles pour la construction des routes - Sécurité - Partie 4: Prescriptions spécifiques pour compacteurs

Premični stroji za gradnjo cest - Varnost - 4. del: Posebne zahteve za stroje za kompaktiranje tal

General Information

Status
Not Published
ICS
93.080.10 - Road construction
Technical Committee
CEN/TC 151 - Construction equipment and building material machines - Safety
Drafting Committee
CEN/TC 151/WG 5 - Road construction machines - Safety
Current Stage
5098 - Decision to abandon - Formal Approval
Start Date
13-Jan-2011
Completion Date
13-Jan-2011
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Mandate
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
SIST EN 500-4:2007/kprA2:2010 - Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines

Relations

Replaced By
EN 500-4:2011 - Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines
Effective Date
19-Feb-2011
Amends
EN 500-4:2006+A1:2009 - Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines
Effective Date
08-Jun-2022

Buy Standard

EN 500-4:2007/kprA2:2010 - BARVEEN 500-4:2007/kprA2:2010 - BARVE
PreviousNext
Draft
EN 500-4:2007/kprA2:2010 - BARVE
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 500-4:2007/kprA2:2010
01-december-2010
3UHPLþQLVWURML]DJUDGQMRFHVW9DUQRVWGHO3RVHEQH]DKWHYH]DVWURMH]D
NRPSDNWLUDQMHWDO
Mobile road construction machinery - Safety - Part 4: Specific requirements for
compaction machines
Bewegliche Straßenbaumaschinen - Sicherheit - Teil 4: Besondere Anforderungen an
Verdichtungsmaschinen
Machines mobiles pour la construction des routes - Sécurité - Partie 4: Prescriptions
spécifiques pour compacteurs
Ta slovenski standard je istoveten z: EN 500-4:2006/FprA2
ICS:
93.080.10 Gradnja cest Road construction
SIST EN 500-4:2007/kprA2:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 500-4:2007/kprA2:2010

---------------------- Page: 2 ----------------------

SIST EN 500-4:2007/kprA2:2010


EUROPEAN STANDARD
FINAL DRAFT
EN 500-4:2006+A1:2009
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA2
September 2010
ICS 93.080.10
English Version
Mobile road construction machinery - Safety - Part 4: Specific
requirements for compaction machines
Machines mobiles pour la construction des routes - Bewegliche Straßenbaumaschinen - Sicherheit - Teil 4:
Sécurité - Partie 4: Prescriptions spécifiques pour Besondere Anforderungen an Verdichtungsmaschinen
compacteurs
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 151.

This draft amendment A2, if approved, will modify the European Standard EN 500-4:2006+A1:2009. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 500-4:2006/FprA2:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 500-4:2007/kprA2:2010
EN 500-4:200
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13862:2021(Main)
Floor cutting-off machines - Safety
SIST EN 13862:2022

This document applies to pedestrian-controlled floor-sawing machines having travel power feed or manual feed (see 3.1) for sawing, grooving and milling floor surfaces made of concrete, asphalt and similar mineral building materials where the main power is supplied by electric or internal combustion prime engine. The power transmission of floor-sawing machines is mechanical or hydraulic.
This document deals with all significant hazards, hazardous situations or hazardous events relevant to floor sawing machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A). This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during the lifetime of the machinery as described in EN ISO 12100:2010, 5.4.
These machines are designed for use with rotating cutting-off wheels for wet and dry cutting. These cutting-off wheels can be either a diamond cutting-off wheel or a boron nitride cutting-off wheel.
This document does not apply to:
-   self-propelled ride-on floor-sawing machines;
-   machines moving along a rail;
-   hand-held portable cutting off machines for construction materials mounted on a mobile support, to be used as floor saws;
-   remote-controlled machines.
In this document, floor-sawing machines are called “machines”, and cutting-off wheels are also called “tools”.
This document applies to machines which are manufactured after the date of approval of the standard by CEN.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13020:2015(Main)
Road surface treatment machines - Safety requirements
SIST EN 13020:2016

This European Standard applies to road surface treatment machines, which are in particular:
-   binder sprayers [or sprayers];
-   chipping spreaders [or spreaders];
-   machines for surface repairs (binder sprayer chipping spreader [or sprayer spreader]);
-   mastics asphalt mixers;
-   joint sealer;
-   micro-surfacing machines/slurry machines;
-   cold asphalt laying / micro-asphalt-paving machines
(see also Clause 3).
Road surface treatment machines can be mounted on a carrier vehicle, trailer or articulated truck, combining to form an integral unit. It is also possible to mount a road surface treatment machine on its own chassis construction and propulsion system (self-propelled or pedestrian-controlled). In all cases the machine and chassis form an integral unit.
Directives and standards for the vehicular truck chassis aspects, termed 'carrier vehicle' in this document, would be those relative to that equipment, even where specific modifications have been made to realize the road surface treatment application. The use in public road traffic is governed by the national regulations.
This European Standard deals with all significant hazards identified through a risk assessment relevant to road surface treatment machines when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). This European Standard does not deal with significant hazards associated with pressurized tanks, and EMC. This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards associated with machine operation, setting and adjustments, load discharge and routine maintenance.
This European Standard does not include requirements for the carrier vehicles or special constructions. These are covered in directives related to the construction of vehicles. Demountable bodywork systems (e.g. demountable containers) are specified in other standards. Vibrations are not dealt with in the standard, because for all machines of this family vibration is not a relevant hazard due to the low working speed and special working conditions (e.g. flat surface).
This European Standard does not deal with the risks associated with the operation of the machines in potentially explosive atmospheres.
This European Standard does not include requirements of the 94/55/EC Directive related to transport of dangerous goods by road but contains additional specifications in link with these existing requirements.
This European Standard applies to machines which are manufactured after the date of approval of this standard by CEN.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 536:2015(Main)
Road construction machines - Mixing plants for road construction materials - Safety requirements
SIST EN 536:2015

This European Standard specifies the safety requirements applicable to stationary and relocatable mixing plants for the production of materials (e.g. hot-mix asphalt, cold-mix asphalt, cement gravel) used for the construction and maintenance of traffic routes (roads, highways, sidewalks, airfields, etc.) water retaining works, dam walls, culverts, etc.
This European Standard applies to the following types of mixing plant:
a)   hot Asphalt mixing plant;
b)   cold mixing plant (e.g. for production of cement gravel, cold mix asphalt);
c)   mixing plant for bituminous or non-bituminous reclaimed materials;
d)   mixing plant for mastic asphalt, also including natural asphalt.
Machines moving during the working process (e.g. mobile mastic asphalt mixers) and crushers are not covered by this European Standard.
Those types of asphalt mixing plants can also be combined or enlarged by additional installations (e.g. Plant for storage of binders (e.g. bituminous, synthetic, vegetal).
This European Standard deals with all significant hazards pertinent to mixing plants, when they are used as intended and under the conditions of misuse which are reasonably foreseen by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This European Standard does not apply to machines for the production of cement concrete and mortar as covered in EN 12151.
This European Standard does not deal with hazards caused by flammable gases. As soon as information is available it will be included.
This European Standard is not applicable to mixing plants for road construction materials, which are manufactured before the date of publication of this European Standard by CEN.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 500-1:2006+A1:2009(Main)
Mobile road construction machinery - Safety - Part 1: Common requirements
SIST EN 500-1:2007+A1:2010

1.1   This part of EN 500 specifies the common safety requirements for mobile road construction machinery ). The EN 500 series is applicable to mobile road construction machinery as listed in Annex A. When no specific standard exists, EN 500-1 applies.
It specifies common requirements for the design and construction of mobile road construction machinery in order to protect workers from accidents and health hazards which could occur during operation, loading, transport and maintenance.
Additional specific requirements for certain types of mobile road construction machinery are given in parts 2 to 4 and 6 of this standard.
This part of this standard gives safety requirements for all types of mobile road construction machinery and shall be used in conjunction with one of the parts 2 to 4 and 6. These machine-specific parts do not repeat the requirements from part 1 but add to or replace the requirements for the type of mobile road construction machinery in question.
Machine-specific requirements in parts 2 to 4 and 6 take precedence over the respective requirements of this stan-dard.
For types of mobile road construction machinery not dealt with in parts 2 to 4 and 6, EN 500-1 applies and if for those machinery additional derived risks may arise, these risks have to be taken into consideration.
1.2   This European Standard deals with all significant hazards, hazardous situations and events relevant to mobile road construction machinery, when they are used as intended and under conditions of misuse which are reasonably foreseeable (see Clause 4).
This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards as specified in Clause 4.
1.3   This European Standard applies to machines which are manufactured after the date of publication of this European Standard by CEN.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 500-2:2006+A1:2008(Main)
Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines
SIST EN 500-2:2007+A1:2008

This part of EN 500 specifies the safety requirements for road-milling machines as defined in Clause 3 and deals with all significant hazards, hazardous situations and events relevant to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable.
This part of EN 500 contains additional requirements to EN 500-1 "Common requirements".

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 500-3:2006+A1:2008(Main)
Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines
SIST EN 500-3:2007+A1:2008

This part of EN 500 specifies the safety requirements for soil-stabilising machines and recycling machines as de-fined in Clause 3 and deals with all significant hazards, hazardous situations and events relevant to these ma-chines, when they are used as intended and under conditions of misuse which are reasonably foreseeable.
This part of EN 500 contains additional requirements to EN 500-1 "Common requirements".

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 500-6:2006+A1:2008(Main)
Mobile road construction machinery - Safety - Part 6: Specific requirements for paver-finishers
SIST EN 500-6:2007+A1:2008

This part of EN 500 specifies the safety requirements for paver-finishers as defined in Clause 3 and deals with the significant hazards relevant to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable. This part of EN 500 contains additional requirements to EN 500-1 "Common requirements".
If internal and/or external vibrators are used for concrete paving, then prEN 12649 applies.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN ISO 20500-6(Main)
Mobile road construction machinery - Safety - Part 6: Specific requirements for paver-finishers
oSIST prEN ISO 20500-6:2020

This part of EN 500 specifies the safety requirements for paver-finishers as defined in Clause 3 and deals with the significant hazards relevant to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable. This part of EN 500 contains additional requirements to EN 500-1 "Common requirements". If internal and/or external vibrators are used for concrete paving, then prEN 12649 applies.

  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN ISO 20500-2(Main)
Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines
oSIST prEN ISO 20500-2:2020

This part of EN 500 specifies the safety requirements for road-milling machines as defined in Clause 3 and deals with all significant hazards, hazardous situations and events relevant to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable. This part of EN 500 contains additional requirements to EN 500-1 "Common requirements".

  • Draft
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN ISO 20500-4(Main)
Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines
oSIST prEN ISO 20500-4:2020

This part of EN 500 specifies the safety requirements for compaction machines as defined in Clause 3 and deals with all significant hazards, hazardous situations and events relevant to compaction machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable. This document specifies additional requirements to and/or exceptions from EN 500-1 "Common requirements".

  • Draft
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day