Plant biostimulants - Determination of the pH for liquid microbial plant biostimulants/pH in microbial products - Determination of pH

This document specifies a method for laboratory measurement of the pH value in liquid microbial plant biostimulants, using pH electrodes with a glass membrane.
This document does not apply to plant biostimulants other than microbial plant biostimulants.
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilizing products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Plant Biostimulants and where the following category Plant Biostimulants is the highest percentage in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest percentage in the blend, the European Standard for the highest percentage of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.

Pflanzen-Biostimulanzien - Bestimmung des pH‑Wertes für flüssige mikrobielle Pflanzen-Biostimulanzien/pH‑Wert in mikrobiellen Produkten - Bestimmung des pH‑Wertes

Dieses Dokument legt ein Verfahren zur Messung des pH Wertes in flüssigen mikrobiellen Pflanzen-Biostimulanzien im Labor unter Verwendung von pH Elektroden mit einer Glasmembran fest.
Dieses Dokument ist nicht anwendbar auf andere Pflanzen-Biostimulanzien als mikrobielle Pflanzen-Biostimulanzien.
Dieses Dokument ist für die Mischungen von Düngeprodukten anwendbar, in denen eine Mischung aus mindestens zwei der folgenden Kategorien von Komponenten-EU Düngeprodukten besteht: Düngemittel, Kalkdünger, Bodenverbesserungsmittel, Kultursubstrate, Pflanzen-Biostimulanzien und wenn die folgende Kategorie Pflanzen-Biostimulanzien prozentual den höchsten Massen- oder Volumenanteil in der Mischung bzw., bei flüssiger Form, den höchsten Trockenmasseanteil aufweist. Wenn Pflanzen-Biostimulanzien nicht den höchsten prozentualen Anteil in der Mischung ausmachen, ist die für den höchsten prozentualen Anteil geltende Europäische Norm anwendbar. Falls eine Düngemittelmischung aus Komponenten gleicher Menge besteht oder falls die für die Mischung verwendeten Komponenten-EU Düngeprodukte identische Formulierungen  haben, entscheidet der Anwender, welche Norm angewendet wird.

Biostimulants des végétaux - Détermination du pH des biostimulants microbiens liquides des végétaux/pH dans les produits microbiens - Détermination du pH

Le présent document spécifie une méthode de mesure en laboratoire de la valeur du pH dans les biostimulants microbiens des végétaux sous forme liquide, à l’aide d’électrodes de pH avec une membrane en verre.
Le présent document ne s’applique pas aux biostimulants des végétaux autres que les biostimulants microbiens des végétaux.
Le présent document est applicable aux mélanges de fertilisants constitués d’au moins deux composants appartenant aux catégories de fertilisants UE suivantes : engrais, amendements minéraux basiques, amendements du sol, supports de culture, biostimulants des végétaux et, dans lesquels la catégorie Biostimulants des végétaux représente le pourcentage le plus élevé du mélange en masse ou en volume, ou dans le cas d’un liquide, en masse sèche. Si les biostimulants des végétaux ne représentent pas le pourcentage le plus élevé du mélange, la Norme européenne relative au composant représentant le pourcentage le plus élevé du mélange s’applique. Dans le cas où un mélange de fertilisants contient des composants en quantité égale ou dans le cas où les composants des fertilisants UE utilisés pour le mélange ont des formulations  identiques, l’utilisateur décide quelle norme appliquer.

Rastlinski biostimulanti - Določanje pH-vrednosti za tekoče mikrobne biostimulante/mikrobne proizvode - Določanje pH-vrednosti

General Information

Status
Not Published
Publication Date
18-Sep-2024
Current Stage
5020 - Submission to Vote - Formal Approval
Start Date
30-May-2024
Due Date
19-Dec-2023
Completion Date
30-May-2024

Relations

Buy Standard

Draft
prEN 17721:2023
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
oSIST prEN 17721:2023
01-maj-2023
Rastlinski biostimulanti - Določanje pH-vrednosti za tekoče mikrobne
biostimulante/mikrobne proizvode - Določanje pH-vrednosti
Plant biostimulants - Determination of the pH for liquid microbial plant biostimulants/pH in
microbial products - Determination of pH
Pflanzen-Biostimulanzien - Bestimmung des pH Wertes für flüssige mikrobielle Pflanzen-
Biostimulanzien/pH Wert in mikrobiellen Produkten - Bestimmung des pH Wertes
Biostimulants des végétaux - Détermination du pH des biostimulants microbiens liquides
des végétaux/pH dans les produits microbiens - Détermination du pH
Ta slovenski standard je istoveten z: prEN 17721
ICS:
65.080 Gnojila Fertilizers
oSIST prEN 17721:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 17721:2023
oSIST prEN 17721:2023
DRAFT
EUROPEAN STANDARD
prEN 17721
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2023
ICS 65.080 Will supersede CEN/TS 17721:2022
English Version
Plant biostimulants - Determination of the pH for liquid
microbial plant biostimulants/pH in microbial products -
Determination of pH
Biostimulants des végétaux - Détermination du pH des Pflanzen-Biostimulanzien - Bestimmung des pH Wertes
biostimulants microbiens liquides des végétaux/pH für flüssige mikrobielle Pflanzen-Biostimulanzien/pH
dans les produits microbiens - Détermination du pH Wert in mikrobiellen Produkten - Bestimmung des pH
Wertes
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 455.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17721:2023 E
worldwide for CEN national Members.

oSIST prEN 17721:2023
prEN 17721:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 9
5 Apparatus and materials . 9
5.1 General . 9
5.2 pH measuring apparatus . 9
5.3 Water . 10
5.4 pH meter . 10
5.5 pH electrode . 11
5.6 Standard buffer solutions . 11
5.7 Storage solution for the pH electrodes . 11
6 Sampling . 11
7 Procedure. 12
7.1 General . 12
7.2 Test conditions . 12
7.3 Calibration . 12
7.4 Number of determinations . 12
7.5 Measuring the pH value . 12
8 Evaluation . 13
9 Precision . 13
10 Test report . 13
Annex A (informative) Repeatability and Reproducibility data . 14
A.1 Materials used in the interlaboratory study . 14
A.2 Samples . 14
A.3 Procedure. 14
A.4 Replicate determination . 14
A.5 Results . 14
Annex ZA (informative) Relationship of this European Standard and the essential
requirements of Regulation (EU) 2019/1009 making available on the market of EU
fertilising products aimed to be covered. 17
Bibliography . 18
oSIST prEN 17721:2023
prEN 17721:2023 (E)
European foreword
This document (prEN 17721:2023) has been prepared by Technical Committee CEN/TC 455 “Plant
Biostimulants”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN enquiry.
This document will supersede CEN/TS 17721:2022.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For relationship with EU Directive(s) / Regulation(s), see informative Annex ZA, which is an integral part
of this document.
oSIST prEN 17721:2023
prEN 17721:2023 (E)
Introduction
The new Fertilising Products Regulation (Reg. (EU) 2019/1009) introduces new requirements related to
quality, safety, and labelling of fertilizing products and extends the scope to organic fertilizers, organo-
mineral fertilizers, growing media, biostimulants and others. The Regulation harmonizes EU rules for
products derived from waste organic materials and by products, and provides rules to recover nutrients
into secondary raw materials – largely boosting the EU Circular Economy.
CEN/TC 455 “Plant Biostimulants” is one of the three Technical Committees in charge of developing
deliverables to ensure full harmonization of fertilizing products on the European Single Market under the
Fertilizing Products Regulation, standardizing terminology, specifications, testing methods for safety and
environmental criteria of the fertilizing products.
This document was prepared by the experts of CEN/TC 455 “Plant Biostimulants”. The European
Committee for Standardization (CEN) was requested by the European Commission (EC) to draft
European standards or European standardization deliverables to support the implementation of
Regulation (EU) 2019/1009 of 5 June 2019 laying down rules on the making available on the market of
EU fertilising products (“FPR” or “Fertilising Products Regulation”). This standardization request,
presented as SR M/564, also contributes to the Communication on “Innovating for Sustainable Growth:
A Bio economy for Europe”. Working Group 5 “Labelling and denominations”, was created to develop a
work program as part of this standardization request.
Technical committee CEN/TC 455 “Plant Biostimulants” was established to carry out the work program
that will prepare a series of standards. The interest in biostimulants has increased significantly in Europe
as a valuable tool to use in agriculture. Standardization was identified as having an important role in
order to promote the use of biostimulants. The work of CEN/TC 455 seeks to improve the reliability of
the supply chain, thereby improving the confidence of farmers, industry, and consumers in biostimulants,
and will promote and support commercialisation of the European biostimulant industry.
Liquid microbial plant biostimulants have a pH optimal for contained microorganisms and for plants [1].
WARNING — Persons using this document should be familiar with normal laboratory practice. This
document does not purport to address all of the safety problems, if any, associated with its use. It is the
responsibility of the user to establish appropriate safety and health practices and to ensure compliance
with any national regulatory conditions.
IMPORTANT — It is absolutely essential that tests conducted in accordance with this document be
carried out by suitably trained staff.
oSIST prEN 17721:2023
prEN 17721:2023 (E)
1 Scope
This document specifies a method for laboratory measurement of the pH value in liquid microbial plant
biostimulants, using pH electrodes with a glass membrane.
Plant biostimulants other than microbial plant biostimulants are excluded from the scope of this
document because there is no essential requirement in the Regulation [1] for measuring the pH of non-
microbial plant biostimulants.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 17702-1:— , Plant biostimulants — Sampling and sample preparation — Part 1: Sampling
EN 17702-2:— , Plant biostimulants — Sampling and sample preparation — Part 2: Sample preparation
EN 17724:— , Plant biostimulants — Terminology
EN ISO 3696:1995, Water for analytical laboratory use — Specification and test methods (ISO 3696:1987)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 17724:— and the following
apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
• ISO Online browsing platform: available at https://www.iso.org/obp
• IEC Electropedia: available at https://www.electropedia.org/
3.1
pH
measure for the acidic or basic reaction of an aqueous solution or dispersion
Note 1 to entry: Notation of pH: the p and the H are vertically on one line.
Note 2 to entry: The acidic reaction is determined by the activity of the existing hydrogen ions. The basic reaction
is determined by the activity of the existing hydroxide ions. The direct relationship between the activities of the
hydrogen ions and the hydroxide ions is described by the ionic product of the water.

Under preparation
Under preparation
Under preparation
oSIST prEN 17721:2023
prEN 17721:2023 (E)
3.2
pH value
decadal logarithm of the hydrogen ion activity multiplied with (−1)

 m ⋅ γ
a
H++mH,
H+

pH= pa =−lg= −lg
H+


m m
00

with
am= ⋅γ
H++H mH, +
where
+
a is the activity of the hydrogen ion, expressed in mole per kilogram (mol/kg);
H
m is the standard molality expressed in mole per kilogram (mol/kg);
γ is the activity coefficient of the hydrogen ion;
m,H+
+
m is the molality of the h
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.