prEN 10265
(Main)Magnetics materials - Specification for electrical steel strip and sheet with specified mechanical properties and magnetic polarisation
Magnetics materials - Specification for electrical steel strip and sheet with specified mechanical properties and magnetic polarisation
This document defines the grades of electrical steel strip and sheet with specified mechanical properties and magnetic polarisation. It specifies general requirements, mechanical properties, magnetic polarisation, geometric characteristics, tolerances and technological characteristics, as well as inspection procedures.
This document applies to electrical steel strip and sheet for the construction of poles and rims of rotating electrical machines.
The grades are grouped into two classes according to their manufacturing process:
- hot-rolled grades;
- cold-rolled grades.
NOTE These materials correspond to EN 60404-1:2018, D.2.
Magnetische Werkstoffe - Anforderungen an Elektroband und -blech mit festgelegten mechanischen Eigenschaften und magnetischer Polarisation
Dieses Dokument enthält Stahlsorten für Elektroband- und -blech aus Stahl mit festgelegten mechanischen und magnetischen Eigenschaften. Im Einzelnen sind allgemeine Anforderungen, mechanische Eigenschaften, magnetische Polarisation, geometrische Merkmale, Grenzabmaße und technologische Merkmale, sowie Annahmekriterien festgelegt.
Die vorliegende Norm gilt für Erzeugnisse, die für die Pole und Einfassungen von rotierenden elektrischen Maschinen bestimmt sind.
Die Stahlsorten sind nach Herstellverfahren in zwei Klassen unterteilt:
- Warmgewalzte Stahlsorten;
- Kaltgewalzte Stahlsorten.
ANMERKUNG Diese Erzeugnisse entsprechen EN 60404-1:2017, D.2.
Matériaux magnétiques - Spécification pour les bandes et tôles en acier électrique à caractéristiques mécaniques et polarisation magnétique spécifiées
Le présent document définit les nuances de bandes et de tôles d'acier électrique ayant des caractéristiques mécaniques et une polarisation magnétique spécifiées. Il spécifie les prescriptions générales, les caractéristiques mécaniques, la polarisation magnétique, les caractéristiques géométriques, les tolérances et les caractéristiques technologiques, ainsi que les procédures de contrôle.
Le présent document s’applique aux bandes et tôles en acier électrique pour la construction des pôles et des jantes des machines électriques tournantes.
Les nuances sont regroupées en deux classes selon leur procédé de fabrication :
- nuances laminées à chaud.
- nuances laminées à froid.
NOTE Ces matériaux correspondent à l’EN 60404-1:2017, D.2.
Magnetni materiali - Specifikacija električnih jeklenih trakov in pločevin s specifičnimi mehanskimi lastnostmi in magnetno polarizacijo
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 10265:2024
01-februar-2024
Magnetni materiali - Specifikacija električnih jeklenih trakov in pločevin s
specifičnimi mehanskimi lastnostmi in magnetno polarizacijo
Magnetics materials - Specification for electrical steel strip and sheet with specified
mechanical properties and magnetic polarisation
Magnetische Werkstoffe - Anforderungen an Elektroband und -blech mit festgelegten
mechanischen Eigenschaften und magnetischer Polarisation
Matériaux magnétiques - Spécification pour les bandes et tôles en acier électrique à
caractéristiques mécaniques et polarisation magnétique spécifiées
Ta slovenski standard je istoveten z: prEN 10265
ICS:
29.030 Magnetni materiali Magnetic materials
77.140.50 Ploščati jekleni izdelki in Flat steel products and semi-
polizdelki products
oSIST prEN 10265:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 10265:2024
---------------------- Page: 2 ----------------------
oSIST prEN 10265:2024
DRAFT
EUROPEAN STANDARD
prEN 10265
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2023
ICS 77.140.50 Will supersede EN 10265:1995
English Version
Magnetics materials - Specification for electrical steel strip
and sheet with specified mechanical properties and
magnetic polarisation
Matériaux magnétiques - Spécification pour les bandes Magnetische Werkstoffe - Anforderungen an
et tôles en acier électrique à caractéristiques Elektroband und -blech mit festgelegten mechanischen
mécaniques et polarisation magnétique spécifiées Eigenschaften und magnetischer Polarisation
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 459/SC 8.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 10265:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 10265:2024
prEN 10265:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Classification. 6
5 Designation . 6
6 General requirements . 7
6.1 Production process . 7
6.2 Form of supply .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.