EN ISO 13517:2020

Metallic powders - Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2020)

This document specifies a method for determining the flow rate of metallic powders, including powders for hardmetals and mixes of metallic powders and organic additives such as lubricants, by means of a calibrated funnel (Gustavsson flowmeter).
The method is applicable only to powders which flow freely through the specified test orifice.

Metallpulver - Ermittlung der Durchflussrate mit Hilfe eines kalibrierten Trichters (Gustavsson-Flowmeter) (ISO 13517:2020)

Dieses Dokument legt ein Verfahren zur Ermittlung der Durchflussrate für Metallpulver einschließlich Hartmetallpulver und Gemische aus Metallpulvern mit organischen Zusatzstoffen, z. B. Schmiermitteln, mit Hilfe eines kalibrierten Trichters (Gustavsson Flowmeter) fest.
Dieses Verfahren ist nur auf Pulver anwendbar, die frei durch die festgelegte Ausflussöffnung des Prüftrichters fließen.

Poudres métalliques - Détermination du temps d'écoulement au moyen d'un entonnoir calibré (cône d'écoulement de Gustavsson) (ISO 13517:2020)

Le présent document spécifie une méthode visant à déterminer le temps d'écoulement des poudres métalliques, y compris les poudres pour métaux-durs et les mélanges de poudres métalliques et d'additifs organiques tels que les lubrifiants, au moyen d'un entonnoir calibré (cône d'écoulement de Gustavsson).
Cette méthode s'applique uniquement aux poudres qui s'écoulent librement par l'orifice d'essai spécifié.

Kovinski praški - Ugotavljanje hitrosti pretoka z uporabo kalibriranega lija (merilnik pretoka po Gustavssonu) (ISO 13517:2020)

General Information

• Status: Published
• Publication Date: 12-May-2020
• Withdrawal Date: 29-Nov-2020
• ICS: 77.160 - Powder metallurgy
• Technical Committee: CEN/SS M11 - Powder metallurgy
• Drafting Committee: CEN/SS M11 - Powder metallurgy
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 13-May-2020
• Completion Date: 13-May-2020
• Ref Project: SIST EN ISO 13517:2020 - Metallic powders - Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2020)

Relations

• Replaces: EN ISO 13517:2013 - Metallic powders - Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2013)
• Effective Date: 20-May-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13517:2020
01-julij-2020
Nadomešča:
SIST EN ISO 13517:2014
Kovinski praški - Ugotavljanje hitrosti pretoka z uporabo kalibriranega lija
(merilnik pretoka po Gustavssonu) (ISO 13517:2020)
Metallic powders - Determination of flow rate by means of a calibrated funnel
(Gustavsson flowmeter) (ISO 13517:2020)
Metallpulver - Ermittlung der Durchflussrate mit Hilfe eines kalibrierten Trichters
(Gustavsson flowmeter) (ISO 13517:2020)
Poudres métalliques - Détermination du temps d'écoulement au moyen d'un entonnoir
calibré (cône d'écoulement de Gustavsson) (ISO 13517:2020)
Ta slovenski standard je istoveten z: EN ISO 13517:2020
ICS:
77.160 Metalurgija prahov Powder metallurgy
SIST EN ISO 13517:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 13517:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 13517:2020


EN ISO 13517
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2020
EUROPÄISCHE NORM
ICS 77.160 Supersedes EN ISO 13517:2013
English Version

Metallic powders - Determination of flow rate by means of
a calibrated funnel (Gustavsson flowmeter) (ISO
13517:2020)
Poudres métalliques - Détermination du temps Metallpulver - Ermittlung der Durchflussrate mit Hilfe
d'écoulement au moyen d'un entonnoir calibré (cône eines kalibrierten Trichters (Gustavsson flowmeter)
d'écoulement de Gustavsson) (ISO 13517:2020) (ISO 13517:2020)
This European Standard was approved by CEN on 1 May 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13517:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 13517:2020
EN ISO 13517:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 13517:2020
EN ISO 13517:2020 (E)
European foreword
This document (EN ISO 13517:2020) has been prepared by Technical Committee ISO/TC 119 "Powder
metallurgy" in collaboration with CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2020, and conflicting national standards
shall be withdrawn at the latest by November 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 13517:2013.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 13517:2020 has been approved by CEN as EN ISO 13517:2020 without any modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 13517:2020

---------------------- Page: 6 ----------------------
SIST EN ISO 13517:2020
INTERNATIONAL ISO
STANDARD 13517
Second edition
2020-04
Metallic powders — Determination
of flow rate by means
...