EN ISO 11681-2:2011

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011)

ISO 11681-2:2011 gives safety requirements and measures for their verification for the design and construction for tree service of portable, combustion-engine, hand-held chain-saws having a maximum mass, without guide bar or saw chain and with tanks empty, of 4,3 kg, intended to be used, with the right hand on the rear handle and left hand on the front handle, by a trained operator for pruning and dismantling standing tree crowns, and by persons having read and understood the safety requirements provided in the instruction handbook, using the appropriate personal protective equipment (PPE). Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified.  
ISO 11681-2:2011 deals with all significant hazards, hazardous situations and hazardous events relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.

Forstmaschinen - Sicherheitstechnische Anforderungen und Prüfungen für tragbare Kettensägen - Teil 2: Kettensägen für die Baumpflege (ISO 11681-2:2011)

Dieser Teil von ISO 11681 enthält Sicherheitsanforderungen und Maßnahmen zu deren Überprüfung für die
Gestaltung und Konstruktion von tragbaren, handgehaltenen verbrennungsmotorisch betriebenen
Kettensägen für die Baumpflege, mit einer maximalen Masse — ohne Führungsschiene oder Kette und mit
leeren Tanks — von 4,3 kg, die für die Benutzung mit der rechten Hand am hinteren Griff und der linken Hand
am vorderen Griff, durch einen in der Anwendung ausgebildeten Benutzer zum Entasten und Absägen
stehender Baumkronen und durch Personen, die die mitgelieferten Sicherheitsanforderungen in der
Betriebsanleitung gelesen und verstanden haben sowie angemessene persönliche Schutzausrüstung tragen
(PSA), vorgesehen sind. Methoden zur Vermeidung oder Verminderung der sich aus dem Gebrauch solcher
Maschinen ergebenden Gefährdungen, und die vom Hersteller zu erbringenden Informationen für sicheres
Arbeiten, die vom Hersteller zu erbringen sind, werden festgelegt.
Dieser Teil der ISO 11681 behandelt alle signifikanten Gefährdungen, Gefährdungssituationen oder
Gefährdungsereignisse, die für diese Maschinen relevant sind, sofern sie zu dem vorgesehenen Zweck und
bei vernünftigerweise durch den Hersteller vorhersehbarem Missbrauch eingesetzt werden.
ANMERKUNG Siehe Anhang B zur Liste der signifikanten Gefährdungen.
Dieser Teil der ISO 11681 gilt für Kettensägen, die nach dem Veröffentlichungsdatum dieser Norm hergestellt
wurden.

Matériel forestier - Exigences de sécurité et essais des scies à chaîne portatives - Partie 2: Scies à chaîne pour l'élagage des arbres (ISO 11681-2:2011)

L'ISO 11681-2:2011 spécifie les exigences de sécurité et les mesures pour leur vérification, pour la conception et la construction des scies à chaîne portatives à moteur à combustion interne pour l'élagage des arbres, tenues à la main, ayant une masse maximale de 4,3 kg (guide-chaîne et chaîne non compris et réservoirs vides), prévues pour être manoeuvrées avec la main droite sur la poignée arrière et la main gauche sur la poignée avant, par un opérateur qualifié pour la taille, l'élagage et la coupe des parties supérieures (houppier) des arbres sur pied et par des personnes qui ont lu et compris les exigences de sécurité de la notice d'instructions et qui utilisent l'équipement de protection individuelle (EPI) approprié. Elle spécifie des méthodes pour éliminer ou réduire les phénomènes dangereux inhérents à l'utilisation de ces machines et le type d'informations devant être fournies par le fabricant sur les pratiques d'utilisation sûre.
L'ISO 11681-2:2011 traite de tous les phénomènes dangereux significatifs, situations dangereuses ou événements dangereux pertinents pour ces machines, lorsqu'elles sont utilisées normalement et dans des conditions de mauvais usage raisonnablement prévisibles par le fabricant.

Gozdarski stroji - Zahteve za varnost in preskušanje prenosnih motornih verižnih žag - 2. del: Žage za nego dreves (ISO 11681-2:2011)

Ta del standarda ISO 11681 določa varnostne zahteve in ukrepe za njihovo preverjanje za zasnovo in konstrukcijo prenosnih, ročnih verižnih žag z notranjim izgorevanjem za nego dreves z največjo maso 4,3 kg (vodilo ali veriga žage ni všteta, rezervoarji pa so prazni), ki jih z desno roko na desnem ročaju in levo roko na sprednjem ročaju uporabljajo usposobljeni upravljavci za obrezovanje in razrez stoječih drevesnih krošenj in osebe, ki so prebrale in razumele varnostne zahteve v uporabniškem priročniku ter uporabljajo ustrezno osebno zaščitno opremo (PPE). Predpisane so metode za odpravljanje ali zmanjšanje tveganj, ki izhajajo iz uporabe teh strojev, in vrsta informacij o varnih delovnih praksah, ki jih mora zagotoviti proizvajalec. Ta del standarda ISO 11681 opisuje vsa večja tveganja, nevarne situacije in nevarne dogodke v zvezi s temi stroji, kadar se uporabljajo v skladu z njihovim namenom in pod pogoji pričakovane nepravilne uporabe, ki jih določa proizvajalec. Ta del standarda ISO 11681 se uporablja za verižne žage, izdelane po datumu njegove izdaje.

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-2011
• Withdrawal Date: 24-May-2022
• ICS: 65.060.80 - Forestry equipment
• Technical Committee: CEN/TC 144 - Tractors and machinery for agriculture and forestry
• Drafting Committee: CEN/TC 144 - Tractors and machinery for agriculture and forestry
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 25-May-2022
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN ISO 11681-2:2012 - Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011)

Relations

• Replaces: EN ISO 11681-2:2008 - Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2006)
• Effective Date: 14-Dec-2011
• Replaced By: EN ISO 11681-2:2022 - Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2022)
• Effective Date: 01-Jun-2022
• Amended By: EN ISO 11681-2:2011/A1:2017 - Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011/Amd 1:2017)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11681-2:2012
01-marec-2012
1DGRPHãþD
SIST EN ISO 11681-2:2009
Gozdarski stroji - Zahteve za varnost in preskušanje prenosnih motornih verižnih
žag - 2. del: Žage za nego dreves (ISO 11681-2:2011)
Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2:
Chain-saws for tree service (ISO 11681-2:2011)
Forstmaschinen - Sicherheitstechnische Anforderungen und Prüfungen für tragbare
Kettensägen - Teil 2: Kettensägen für die Baumpflege (ISO 11681-2:2011)
Matériel forestier - Exigences de sécurité et essais des scies à chaîne portatives - Partie
2: Scies à chaîne pour l'élagage des arbres (ISO 11681-2:2011)
Ta slovenski standard je istoveten z: EN ISO 11681-2:2011
ICS:
65.060.80 Gozdarska oprema Forestry equipment
SIST EN ISO 11681-2:2012 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11681-2:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 11681-2:2012


EUROPEAN STANDARD
EN ISO 11681-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2011
ICS 65.060.80 Supersedes EN ISO 11681-2:2008
English Version
Machinery for forestry - Portable chain-saw safety requirements
and testing - Part 2: Chain-saws for tree service (ISO 11681-
2:2011)
Matériel forestier - Exigences de sécurité et essais des Forstmaschinen - Sicherheitstechnische Anforderungen
scies à chaîne portatives - Partie 2: Scies à chaîne pour und Prüfungen für tragbare Kettensägen - Teil 2:
l'élagage des arbres (ISO 11681-2:2011) Kettensägen für die Baumpflege (ISO 11681-2:2011)
This European Standard was approved by CEN on 30 November 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11681-2:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11681-2:2012
EN ISO 11681-2:2011 (E)
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 11681-2:2012
EN ISO 11681-2:2011 (E)
Foreword
This document (EN ISO 11681-2:2011) has been prepared by Technical Committee ISO/TC 23 "Tractors and
machinery for agriculture and forestry" in collaboration with Technical Committee CEN/TC 144 “Tractors and
machinery for agriculture and forestry” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2012, and conflicting national standards shall be withdrawn at
the latest by June 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11681-2:2008.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this E
...