EN ISO 11681-2:2011
(Main)Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011)
Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011)
ISO 11681-2:2011 gives safety requirements and measures for their verification for the design and construction for tree service of portable, combustion-engine, hand-held chain-saws having a maximum mass, without guide bar or saw chain and with tanks empty, of 4,3 kg, intended to be used, with the right hand on the rear handle and left hand on the front handle, by a trained operator for pruning and dismantling standing tree crowns, and by persons having read and understood the safety requirements provided in the instruction handbook, using the appropriate personal protective equipment (PPE). Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified.
ISO 11681-2:2011 deals with all significant hazards, hazardous situations and hazardous events relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
Forstmaschinen - Sicherheitstechnische Anforderungen und Prüfungen für tragbare Kettensägen - Teil 2: Kettensägen für die Baumpflege (ISO 11681-2:2011)
Dieser Teil von ISO 11681 enthält Sicherheitsanforderungen und Maßnahmen zu deren Überprüfung für die
Gestaltung und Konstruktion von tragbaren, handgehaltenen verbrennungsmotorisch betriebenen
Kettensägen für die Baumpflege, mit einer maximalen Masse — ohne Führungsschiene oder Kette und mit
leeren Tanks — von 4,3 kg, die für die Benutzung mit der rechten Hand am hinteren Griff und der linken Hand
am vorderen Griff, durch einen in der Anwendung ausgebildeten Benutzer zum Entasten und Absägen
stehender Baumkronen und durch Personen, die die mitgelieferten Sicherheitsanforderungen in der
Betriebsanleitung gelesen und verstanden haben sowie angemessene persönliche Schutzausrüstung tragen
(PSA), vorgesehen sind. Methoden zur Vermeidung oder Verminderung der sich aus dem Gebrauch solcher
Maschinen ergebenden Gefährdungen, und die vom Hersteller zu erbringenden Informationen für sicheres
Arbeiten, die vom Hersteller zu erbringen sind, werden festgelegt.
Dieser Teil der ISO 11681 behandelt alle signifikanten Gefährdungen, Gefährdungssituationen oder
Gefährdungsereignisse, die für diese Maschinen relevant sind, sofern sie zu dem vorgesehenen Zweck und
bei vernünftigerweise durch den Hersteller vorhersehbarem Missbrauch eingesetzt werden.
ANMERKUNG Siehe Anhang B zur Liste der signifikanten Gefährdungen.
Dieser Teil der ISO 11681 gilt für Kettensägen, die nach dem Veröffentlichungsdatum dieser Norm hergestellt
wurden.
Matériel forestier - Exigences de sécurité et essais des scies à chaîne portatives - Partie 2: Scies à chaîne pour l'élagage des arbres (ISO 11681-2:2011)
L'ISO 11681-2:2011 spécifie les exigences de sécurité et les mesures pour leur vérification, pour la conception et la construction des scies à chaîne portatives à moteur à combustion interne pour l'élagage des arbres, tenues à la main, ayant une masse maximale de 4,3 kg (guide-chaîne et chaîne non compris et réservoirs vides), prévues pour être manoeuvrées avec la main droite sur la poignée arrière et la main gauche sur la poignée avant, par un opérateur qualifié pour la taille, l'élagage et la coupe des parties supérieures (houppier) des arbres sur pied et par des personnes qui ont lu et compris les exigences de sécurité de la notice d'instructions et qui utilisent l'équipement de protection individuelle (EPI) approprié. Elle spécifie des méthodes pour éliminer ou réduire les phénomènes dangereux inhérents à l'utilisation de ces machines et le type d'informations devant être fournies par le fabricant sur les pratiques d'utilisation sûre.
L'ISO 11681-2:2011 traite de tous les phénomènes dangereux significatifs, situations dangereuses ou événements dangereux pertinents pour ces machines, lorsqu'elles sont utilisées normalement et dans des conditions de mauvais usage raisonnablement prévisibles par le fabricant.
Gozdarski stroji - Zahteve za varnost in preskušanje prenosnih motornih verižnih žag - 2. del: Žage za nego dreves (ISO 11681-2:2011)
Ta del standarda ISO 11681 določa varnostne zahteve in ukrepe za njihovo preverjanje za zasnovo in konstrukcijo prenosnih, ročnih verižnih žag z notranjim izgorevanjem za nego dreves z največjo maso 4,3 kg (vodilo ali veriga žage ni všteta, rezervoarji pa so prazni), ki jih z desno roko na desnem ročaju in levo roko na sprednjem ročaju uporabljajo usposobljeni upravljavci za obrezovanje in razrez stoječih drevesnih krošenj in osebe, ki so prebrale in razumele varnostne zahteve v uporabniškem priročniku ter uporabljajo ustrezno osebno zaščitno opremo (PPE). Predpisane so metode za odpravljanje ali zmanjšanje tveganj, ki izhajajo iz uporabe teh strojev, in vrsta informacij o varnih delovnih praksah, ki jih mora zagotoviti proizvajalec. Ta del standarda ISO 11681 opisuje vsa večja tveganja, nevarne situacije in nevarne dogodke v zvezi s temi stroji, kadar se uporabljajo v skladu z njihovim namenom in pod pogoji pričakovane nepravilne uporabe, ki jih določa proizvajalec. Ta del standarda ISO 11681 se uporablja za verižne žage, izdelane po datumu njegove izdaje.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2012
1DGRPHãþD
SIST EN ISO 11681-2:2009
Gozdarski stroji - Zahteve za varnost in preskušanje prenosnih motornih verižnih
žag - 2. del: Žage za nego dreves (ISO 11681-2:2011)
Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2:
Chain-saws for tree service (ISO 11681-2:2011)
Forstmaschinen - Sicherheitstechnische Anforderungen und Prüfungen für tragbare
Kettensägen - Teil 2: Kettensägen für die Baumpflege (ISO 11681-2:2011)
Matériel forestier - Exigences de sécurité et essais des scies à chaîne portatives - Partie
2: Scies à chaîne pour l'élagage des arbres (ISO 11681-2:2011)
Ta slovenski standard je istoveten z: EN ISO 11681-2:2011
ICS:
65.060.80 Gozdarska oprema Forestry equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 11681-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2011
ICS 65.060.80 Supersedes EN ISO 11681-2:2008
English Version
Machinery for forestry - Portable chain-saw safety requirements
and testing - Part 2: Chain-saws for tree service (ISO 11681-
2:2011)
Matériel forestier - Exigences de sécurité et essais des Forstmaschinen - Sicherheitstechnische Anforderungen
scies à chaîne portatives - Partie 2: Scies à chaîne pour und Prüfungen für tragbare Kettensägen - Teil 2:
l'élagage des arbres (ISO 11681-2:2011) Kettensägen für die Baumpflege (ISO 11681-2:2011)
This European Standard was approved by CEN on 30 November 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11681-2:2011: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .4
Foreword
This document (EN ISO 11681-2:2011) has been prepared by Technical Committee ISO/TC 23 "Tractors and
machinery for agriculture and forestry" in collaboration with Technical Committee CEN/TC 144 “Tractors and
machinery for agriculture and forestry” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2012, and conflicting national standards shall be withdrawn at
the latest by June 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11681-2:2008.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 11681-2:2011 has been approved by CEN as a EN ISO 11681-2:2011 without any
modification.
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide one means of conforming to Essential Requirements of
the New Approach Directive 2006/42/EC on machinery.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the normative clauses of
this standard confers, within the limits of the scope of this standard, a presumption of conformity with the
relevant Essential Requirements of that Directive and associated EFTA regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this standard.
INTERNATIONAL ISO
STANDARD 11681-2
Third edition
2011-12-01
Machinery for forestry — Portable chain-
saw safety requirements and testing —
Part 2:
Chain-saws for tree service
Matériel forestier — Exigences de sécurité et essais des scies à chaîne
portatives —
Partie 2: Scies à chaîne pour l’élagage des arbres
Reference number
ISO 11681-2:2011(E)
©
ISO 2011
ISO 11681-2:2011(E)
© ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved
ISO 11681-2:2011(E)
Contents Page
Foreword . iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Safety requirements and/or protective measures . 3
4.1 General . 3
4.2 Handles . 3
4.3 Hand protection . 3
4.4 Balance and holding moment . 5
4.5 Protection against injury by kickback . 5
4.6 Chain catcher . 6
4.7 Spiked bumper . 6
4.8 Chip discharge . 6
4.9 Guide-bar cover . 6
4.10 Engine starting device . 6
4.11 Engine stopping device . 7
4.12 Throttle control . 7
4.13 Drive sprocket guard . 8
4.14 Clutch . 8
4.15 Protection against contact with parts under high voltage . 9
4.16 Protection against contact with hot parts . 9
4.17 Fuel and oil systems .10
4.18 Exhaust gases . 11
4.19 Chain lubrication . 11
4.20 Chain tensioning . 11
4.21 Attachment device . 11
4.22 Vibration .12
4.23 Noise .12
4.24 Electromagnetic immunity .12
5 Information for use .13
5.1 Instruction handbook .13
5.2 Marking .16
5.3 Warnings .16
5.4 Test of labels .17
Annex A (informative) Working with tree service chain-saws from rope and harness .19
Annex B (informative) List of significant hazards .24
Bibliography .26
© ISO 2011 – All rights reserved iii
ISO 11681-2:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.