EN 13445-4:2009/A1:2011

Unfired pressure vessels - Part 4: Fabrication

2010-03-31 EMA: Former standard reference EN 13445-4:2005/prA4 changed to prA1 following e-mail from secretary sent to tcminares on 2010-03-30, in order to avoid amendments published out of order.
2010-01-15 EMA: Tolerance of 9 months before Formal Vote requested through resolution 613 taken on 2009-11-26.
2009-11-27 SJ: This amendment was originally amending the 2002 version. The 2002 version has been consolidated (main + all adopted amendments). prA4 has not yet been adopted. It will now amend the consolidated version of 2009 (00054100)
2009-08-03 EMA: Amendment replaced by EN 13445-4:2009.
2013: Originator of XML version: first setup pilot of CCMC in 2012

Unbefeuerte Druckbehälter - Teil 4: Herstellung

Récipients sous pression non soumis à la flamme - Partie 4: Fabrication

Neogrevane tlačne posode - 4. del: Proizvodnja - Dopolnilo A1

Ta dokument določa zahteve za izdelavo neogrevanih tlačnih posod in njihovih delov, narejenih iz jekla, vključno z njihovim priklopom na netlačne dele. Določa zahteve za sledljivost materiala, odstopanja pri izdelavi, zahteve za varjenje, proizvodne preskuse, zahteve za oblikovanje, toplotno obdelavo, popravila in zaključna dela.

General Information

• Status: Withdrawn
• Publication Date: 06-Dec-2011
• Withdrawal Date: 09-Sep-2014
• ICS: 23.020.30 - Pressure vessels, gas cylinders
• Technical Committee: CEN/TC 54 - Unfired pressure vessels
• Drafting Committee: CEN/TC 54/WG 54 - D - Manufacture
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 10-Sep-2014
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 13445-4:2009/A1:2012 - Unfired pressure vessels - Part 4: Fabrication

Relations

• Replaced By: EN 13445-4:2014 - Unfired pressure vessels - Part 4: Fabrication
• Effective Date: 17-Sep-2014
• Amends: EN 13445-4:2009 - Unfired pressure vessels - Part 4: Fabrication
• Effective Date: 25-Jul-2009

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13445-4:2009/A1:2012
01-januar-2012
1HRJUHYDQHWODþQHSRVRGHGHO3URL]YRGQMD'RSROQLOR$
Unfired pressure vessels - Part 4: Fabrication
Unbefeuerte Druckbehälter - Teil 4: Herstellung
Récipients sous pression non soumis à la flamme - Partie 4: Fabrication
Ta slovenski standard je istoveten z: EN 13445-4:2009/A1:2011
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
SIST EN 13445-4:2009/A1:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13445-4:2009/A1:2012

---------------------- Page: 2 ----------------------

SIST EN 13445-4:2009/A1:2012


EUROPEAN STANDARD
EN 13445-4:2009/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2011
ICS 23.020.30
English Version
Unfired pressure vessels - Part 4: Fabrication
Récipients sous pression non soumis à la flamme - Partie Unbefeuerte Druckbehälter - Teil 4: Herstellung
4: Fabrication
This amendment A1 modifies the European Standard EN 13445-4:2009; it was approved by CEN on 15 October 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13445-4:2009/A1:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13445-4:2009/A1:2012
EN 13445-4:2009/A1:2011 (E)
Contents Page
Foreword .3
1 Table 10.1-1 .4
2 Clause 8.2 .8
3 Clause 10.1 .8
4 Clause 10.5.1 .8
5 Clause 10.5.1 .8
6 Clause 10.5.2 .8
7 Clause 10.5.3 .9
8 Clause 10.8 .9

2

---------------------- Page: 4 ----------------------

SIST EN 13445-4:2009/A1:2012
EN 13445-4:2009/A1:2011 (E)
Foreword
This document (EN 13445-4:2009/A1:2011) has been prepared by Technical Committee CEN/TC 54 “Unfired
pressure vessels”, the secretariat of which is held by BSI.
This Amendment to the European Standard EN 13445-4:2009 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by June 2012, and conflicting national
standards shall be withdrawn at the latest by June 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade A
...