iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1015-19:1998/A1:2004

(Amendment)

Methods of test for mortar for masonry - Part 19: Determination of water vapour permeability of hardened rendering and plastering mortars

Methods of test for mortar for masonry - Part 19: Determination of water vapour permeability of hardened rendering and plastering mortars

This European Standard specifies a method for determining the steady state water vapour permeability of rendering and plastering mortars in accordance with prEN 998-1 at the upper and lower part of the hygroscopic range. The test method is applicable to mortars from which disc shaped specimens of uniform thickness between 10 mm and 30 mm can be made.

Prüfverfahren für Mörtel für Mauerwerk - Teil 19: Bestimmung der Wasserdampfdurchlässigkeit von Festmörteln aus Putzmörteln

Méthodes d'essai des mortiers pour maçonnerie - Partie 19: Détermination de la perméabilité à la vapeur d'eau des mortiers d'enduits durcis

Metode preskušanja zidarskih malt - 19. del: Ugotavljanje prepustnosti strjenega grobega in finega ometa za vodno paro

General Information

Status
Published
Publication Date
05-Oct-2004
Withdrawal Date
30-Jul-2006
ICS
91.100.10 - Cement. Gypsum. Lime. Mortar
Technical Committee
CEN/TC 125 - Masonry
Drafting Committee
CEN/TC 125/WG 4 - Test methods
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
06-Oct-2004
Completion Date
06-Oct-2004
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/116 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on masonry and related products
Ref Project
SIST EN 1015-19:1999/A1:2004 - Methods of test for mortar for masonry - Part 19: Determination of water vapour permeability of hardened rendering and plastering mortars

Relations

Amends
EN 1015-19:1998 - Methods of test for mortar for masonry - Part 19: Determination of water vapour permeability of hardened rendering and plastering mortars
Effective Date
22-Dec-2008

Buy Standard

EN 1015-19:1999/A1:2004EN 1015-19:1999/A1:2004
PreviousNext
Amendment
EN 1015-19:1999/A1:2004
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1015-19:1999/A1:2004
01-december-2004
Metode preskušanja zidarskih malt - 19. del: Ugotavljanje prepustnosti strjenega
grobega in finega ometa za vodno paro
Methods of test for mortar for masonry - Part 19: Determination of water vapour
permeability of hardened rendering and plastering mortars
Prüfverfahren für Mörtel für Mauerwerk - Teil 19: Bestimmung der
Wasserdampfdurchlässigkeit von Festmörteln aus Putzmörteln
Méthodes d'essai des mortiers pour maçonnerie - Partie 19: Détermination de la
perméabilité a la vapeur d'eau des mortiers d'enduits durcis
Ta slovenski standard je istoveten z: EN 1015-19:1998/A1:2004
ICS:
91.100.10 Cement. Mavec. Apno. Malta Cement. Gypsum. Lime.
Mortar
SIST EN 1015-19:1999/A1:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1015-19:1999/A1:2004

---------------------- Page: 2 ----------------------

SIST EN 1015-19:1999/A1:2004
EUROPEAN STANDARD
EN 1015-19:1998/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2004
ICS 91.100.10
English version
Methods of test for mortar for masonry - Part 19: Determination
of water vapour permeability of hardened rendering and
plastering mortars
Méthodes d'essai des mortiers pour maçonnerie - Partie Prüfverfahren für Mörtel für Mauerwerk - Teil 19:
19: Détermination de la perméabilité à la vapeur d'eau des Bestimmung der Wasserdampfdurchlässigkeit von
mortiers d'enduits durcis Festmörteln aus Putzmörteln
This amendment A1 modifies the European Standard EN 1015-19:1998; it was approved by CEN on 6 August 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1015-19:1998/A1:2004: E
wo
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 15824:2017(Main)
Specifications for external renders and internal plasters based on organic binders
SIST EN 15824:2017

This European Standard is applicable to factory-made renders and plasters based on organic binders used for external or internal covering on walls, columns, partitions and ceilings. The products are manufactured in paste form, ready to use, or in powder form. This European Standard is also applicable to renders and plasters with inorganic binders such as silicates, silanes, siloxanes and silicones.
Renders and plasters can form the final surface of the structure, textured or not, or they can provide a levelling of the substrate, adequately smooth for subsequent decorative treatments.
This European Standard contains definitions and final performance requirements. It includes relevant characteristic categories to designate renders and plasters.
This European Standard provides for the assessment and verification of constancy of performance (AVCP) of the product to this European Standard. The marking requirement for products covered by this European Standard is included.
This European Standard is not applicable to coating materials and coating systems according to EN 1062-1 and EN 13300.
This European Standard does not contain recommendations for the design and application of renders and plasters. However, this European Standard may be used for definition of renders and plasters in conjunction with codes of application and national specifications for execution of works.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 998-1:2016(Main)
Specification for mortar for masonry - Part 1: Rendering and plastering mortar
SIST EN 998-1:2017

This European Standard is applicable to factory-made rendering/plastering mortars based on inorganic binders for external (rendering) and internal (plastering) use on walls, ceilings, columns and partitions. It contains definitions and final performance requirements.
This European Standard provides for the assessment and verification of constancy of performance (AVCP) of the product to this European Standard. The marking requirement for products covered by this European Standard is included.
It does not cover mortars where calcium sulphate binder is the principal active binding agent.
Calcium sulphate binder can be used as an additional binder together with air lime. If air lime is the principal active binding component, the rendering/plastering mortar is covered by this European Standard. If the calcium sulphate binder is the principal active binding component, the mortar is covered by EN 13279.
Special fire resistant- and acoustical mortars, mortars for structural repair and surface treatments of building elements such as materials for smoothing or trueing, paints, coatings, thin-layer organic renders/plasters and prefabricated units (e.g. plasterboards) are not dealt with in this European Standard.
This European Standard covers rendering/plastering mortars defined in Clause 3 with the exception of site-made rendering/plastering mortars. However, this European Standard or part of this European Standard may be used in conjunction with codes of application and national specifications covering site-made mortar.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 998-2:2016(Main)
Specification for mortar for masonry - Part 2: Masonry mortar
SIST EN 998-2:2017

This European Standard specifies requirements for factory-made masonry mortars (bedding, jointing and pointing) for use in masonry walls, columns and partitions (e.g. facing and rendered masonry, load bearing or non-load bearing masonry structures for buildings and civil engineering works).
This European Standard defines for fresh mortar the performance related to workable life, chloride content, air content, density and correction time (for thin-layer mortar only). For hardened mortar it defines, e.g. performances related to compressive strength, bond strength, density measured according to the corresponding test methods contained in separate European Standards.
This European Standard provides for the assessment and verification of constancy of performance (AVCP) of the product to this European Standard. The marking requirement for products covered by this European Standard is included.
This European Standard covers masonry mortars defined in Clause 3 with the exception of site made mortar. However, this European Standard or part of this European Standard may be used in conjunction with codes of application and national specifications covering site made mortar.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1015-12:2016(Main)
Methods of test for mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates
SIST EN 1015-12:2016

This European Standard specifies a method for the determination of the adhesive strength between rendering and plastering mortars and a substrate.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13914-2:2016(Main)
Design, preparation and application of external rendering and internal plastering - Part 2: Internal plastering
SIST EN 13914-2:2016

This European Standard deals with the design considerations and essential principles for internal plastering systems and application of plastering systems.
The different parts of the EN 13914 series of standards specify requirements and recommendations for detailing, design and material considerations, the selection of mixes and the application of gypsum plasters, gypsum/lime plasters, lightweight plasters, lime/gypsum-, cement- and cement/lime-based plasters, lime-based plasters, clay plasters, silicate plasters, organic plasters, polymer-modified plasters, etc.
This standard does not deal with the following:
-   external finishes;
-   painting and/or preparation;
-   impregnations;
-   structural repair of concrete;
-   prefabricated fibre-reinforced plaster elements.
Owing to the many and varied materials and practices and different climatic conditions in Europe it is not possible for certain aspects of the standard to enter into sufficient detail to be fully usable to practitioners in each country. Such guidance to complement, but not alter, any basic European recommendations is given in documentation prepared by each country. Aspects of this European Standard, the basic recommendations of which may need to be complemented, are indicated where they occur by a footnote referencing this clause.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13914-1:2016(Main)
Design, preparation and application of external rendering and internal plastering - Part 1: External rendering
SIST EN 13914-1:2016

This European Standard specifies requirements and recommendations for the design, preparation and application of
-   renders based on cement, lime or other mineral binders, and/or combinations thereof, masonry cement and polymer modified binder based external renderings, in accordance with FprEN 998-1 or site made renders;
-   renders based on organic binders in accordance with FprEN 15824
on all common types of backgrounds. It includes rendering on both new and old backgrounds and the maintenance and repair of existing work. This document gives guidance on the use of established site, factory and semi-finished factory made renders.
This document does not cover the following:
a)   the use and application of special renders for liquid retaining structures, e.g. coatings, and for backgrounds to cladding systems;
b)   the structural repair of concrete;
c)   the installation of external thermal insulation composite systems (ETICS);
d)   the specification and use of sealants used to seal joints for use with rendering;
e)   the use of gypsum based renders used externally, but their use may be permitted in some countries;
Gypsum based products soften when subject to prolonged moist conditions. The use of such products externally will depend upon the climatic conditions where the render will be used and on the local building traditions. With the exception of some drier countries in southern Europe gypsum based renders are generally not recommended for external use and are therefore not included within the scope of this document. However, their use may be permitted and controlled locally. )
f)   renders on historical monuments or buildings in protected areas which may be regulated by national codes;
g)   the design and installation of flashings at windowsills and elsewhere.
Because of the many and varied materials and practices and different climatic conditions in Europe it is not possible for certain aspects of the standard to enter into sufficient detail to be fully usable to practitioners in each country. Appropriate guidance to complement, but not alter any basic European recommendations is given in documentation prepared by each country. Aspects of this European Standard whose basic recommendations may need to be complemented are indicated where they occur by a footnote referencing this clause.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1015-6:1998/A1:2006(Amendment)
Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
SIST EN 1015-6:1999/A1:2007

Modification to Foreword, Clause 2 and 7.2.2.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1015-3:1999/A2:2006(Amendment)
Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table)
SIST EN 1015-3:2001/A2:2007

Modification to Clause 2 and Clause 6.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1015-10:1999/A1:2006(Amendment)
Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
SIST EN 1015-10:2001/A1:2007

Modification to Clause 2, Clause 3, Clause 4, 5.1, 7.1, 7.2 and Clause 8.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1015-1:1998/A1:2006(Amendment)
Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis)
SIST EN 1015-1:1999/A1:2007

Modifications to Foreword, Clause 2 and 7.1

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day