Small craft - Electrical/electronic control systems for steering, shift and throttle - Amendment 1 (ISO 25197:2020/Amd 1:2022)

This document establishes the requirements for the design, construction and testing of electrical/electronic steering, shift and throttle systems and dynamic positioning control systems, or combinations thereof, on small craft of up to 24 m length of hull.
This document does not apply to electric trolling motors and autopilot systems on sailing craft.

Kleine Wasserfahrzeuge - Elektrische/elektronische Regelungssysteme für Steuerung, Schaltung und Antrieb - Änderung 1 (ISO 25197:2020/Amd 1:2022)

Dieses Dokument legt die Anforderungen für den Entwurf, die Ausführung und die Prüfung von elektrischen/elektronischen Systemen für die Steuerung, Getriebeschaltung und die Drehzahlregelung, sowie von dynamischen Positionskontrollsystemen oder Kombinationen davon auf kleinen Wasserfahrzeugen mit einer Rumpflänge bis 24 m fest.
Dieses Dokument gilt nicht für elektrische Außenbordmotoren und Schiffs-Voraus-Steuerungssysteme auf Segelfahrzeugen.

Petits navires - Systèmes électriques/électroniques pour le contrôle de la direction, de l'inverseur et des gaz - Amendement 1 (ISO 25197:2020/Amd 1:2022)

Le présent document établit les exigences relatives à la conception, la construction et les essais des systèmes électriques/électroniques de contrôle de la direction, de commandes d'inverseur, des gaz et de positionnement dynamique, ou de leur combinaison, sur les petits navires d'une longueur de coque inférieure ou égale à 24 m.
Le présent document ne s'applique pas aux moteurs électriques de pêche à la traîne et aux pilotes automatiques installés sur les voiliers.

Mala plovila - Električni/elektronski regulacijski sistem za krmarjenje, prestavljanje in pogon - Dopolnilo A1 (ISO 25197:2020/Amd 1:2022)

General Information

Status
Published
Publication Date
01-Nov-2022
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
02-Nov-2022
Completion Date
02-Nov-2022

Relations

Buy Standard

Amendment
EN ISO 25197:2020/A1:2023
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 25197:2020/A1:2023
01-januar-2023
Mala plovila - Električni/elektronski regulacijski sistem za krmarjenje, prestavljanje
in pogon - Dopolnilo A1 (ISO 25197:2020/Amd 1:2022)
Small craft - Electrical/electronic control systems for steering, shift and throttle -
Amendment 1 (ISO 25197:2020/Amd 1:2022)
Kleine Wasserfahrzeuge - Elektrische/elektronische Regelungssysteme für Steuerung,
Schaltung und Antrieb - Änderung 1 (ISO 25197:2020/Amd 1:2022)
Petits navires - Systèmes électriques/électroniques pour le contrôle de la direction, de
l'inverseur et des gaz - Amendement 1 (ISO 25197:2020/Amd 1:2022)
Ta slovenski standard je istoveten z: EN ISO 25197:2020/A1:2022
ICS:
47.020.60 Električna oprema ladij in Electrical equipment of ships
konstrukcij na morju and of marine structures
47.080 Čolni Small craft
SIST EN ISO 25197:2020/A1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 25197:2020/A1:2023

---------------------- Page: 2 ----------------------
SIST EN ISO 25197:2020/A1:2023


EN ISO 25197:2020/A1
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2022
EUROPÄISCHE NORM
ICS 47.080
English Version

Small craft - Electrical/electronic control systems for
steering, shift and throttle - Amendment 1 (ISO
25197:2020/Amd 1:2022)
Petits navires - Systèmes électriques/électroniques Kleine Wasserfahrzeuge - Elektrische/elektronische
pour le contrôle de la direction, de l'inverseur et des Regelungssysteme für Steuerung, Schaltung und
gaz - Amendement 1 (ISO 25197:2020/Amd 1:2022) Antrieb - Änderung 1 (ISO 25197:2020/Amd 1:2022)
This amendment A1 modifies the European Standard EN ISO 25197:2020; it was approved by CEN on 2 August 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 25197:2020/A1:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 25197:2020/A1:2023
EN ISO 25197:2020/A1:2022 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered . 4

2

---------------------- Page: 4 ----------------------
SIST EN ISO 25197:2020/A1:2023
EN ISO 25197:2020/A1:2022 (E)
European foreword
This document (EN ISO 25197:2020/A1:2022) has been prepared by Technical Committee ISO/TC 188
"Small craft" in collaboration with Technical Committee CEN/TC 464 “Small Craft” the secretariat of
which is held by SIS.
This Amendment to the European Standard EN ISO 25197:2020 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by May 2023, and
conflicting national standards shall be withdrawn at the latest by May 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For the relationship with EU Directive(s) see informative Annex ZA, which is an integral part of this
document.
Any feedback and questions on this docum
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.