EN ISO 20957-7:2024

Stationary training equipment - Part 7: Rowing equipment - Additional specific safety requirements and test methods (ISO 20957-7:2024)

This document specifies safety requirements for rowing equipment, in addition to the general safety requirements of ISO 20957-1:2013.
This document is applicable to rowing type stationary training equipment, hereinafter referred to as rowing equipment, within the classes H, S and I and classes A, B and C regarding accuracy.

Stationäre Trainingsgeräte - Teil 7: Rudergeräte, zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren (ISO 20957-7:2024)

Dieses Dokument legt sicherheitstechnische Anforderungen an Rudergeräte fest, zusätzlich zu den allgemeinen sicherheitstechnischen Anforderungen nach ISO 20957 1:2013.
Dieses Dokument ist anwendbar für stationäre Trainingsgeräte mit Ruderfunktion, hiernach als Rudergeräte bezeichnet, innerhalb der Klassen H, S und I sowie, bezüglich Genauigkeit, der Klassen A, B und C.

Appareils d’entraînement fixes - Partie 7: Rameurs - Exigences spécifiques de sécurité et méthodes d'essai supplémentaires (ISO 20957-7:2024)

Le présent document spécifie des exigences de sécurité pour les rameurs qui viennent compléter les exigences de sécurité générales figurant dans l’ISO 20957-1:2013.
Le présent document s’applique aux appareils d’entraînement fixes de type rameurs, désignés ci-après par « rameurs », faisant partie des classes H, S et I, ainsi que des classes de précision A, B et C.

Nepremična oprema za vadbo - 7. del: Oprema za veslanje - Dodatne posebne varnostne zahteve in preskusne metode (ISO 20957-7:2024)

General Information

• Status: Published
• Publication Date: 29-Oct-2024
• ICS: 97.220.30 - Indoor sports equipment
• Technical Committee: CEN/TC 136 - Sports, playground and other recreational equipment
• Drafting Committee: CEN/TC 136/WG 4 - Stationary training equipment
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 30-Oct-2024
• Completion Date: 30-Oct-2024
• Directive: 2001/95/EC - Directive 2001/95/EC of the European Parliament and of the Council of 3 December 2001 on general product safety
• Mandate: M/506 - Standardisation mandate issued to the European standardisation organisations (ESOs) to develop European standards for stationary training equipment
• Ref Project: SIST EN ISO 20957-7:2024 - Stationary training equipment - Part 7: Rowing equipment - Additional specific safety requirements and test methods (ISO 20957-7:2024)

Relations

• Replaces: EN ISO 20957-7:2021 - Stationary training equipment - Part 7: Rowing equipment, additional specific safety requirements and test methods (ISO 20957-7:2020)
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2024
Nadomešča:
SIST EN ISO 20957-7:2021
Nepremična oprema za vadbo - 7. del: Oprema za veslanje - Dodatne posebne
varnostne zahteve in preskusne metode (ISO 20957-7:2024)
Stationary training equipment - Part 7: Rowing equipment - Additional specific safety
requirements and test methods (ISO 20957-7:2024)
Stationäre Trainingsgeräte - Teil 7: Rudergeräte, zusätzliche besondere
sicherheitstechnische Anforderungen und Prüfverfahren (ISO 20957-7:2024)
Équipement d'entraînement fixe - Partie 7: Rameurs - Exigences spécifiques de sécurité
et méthodes d'essai supplémentaires (ISO 20957-7:2024)
Ta slovenski standard je istoveten z: EN ISO 20957-7:2024
ICS:
97.220.30 Oprema za dvoranske športe Indoor sports equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 20957-7
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2024
EUROPÄISCHE NORM
ICS 97.220.30 Supersedes EN ISO 20957-7:2021
English Version
Stationary training equipment - Part 7: Rowing equipment
- Additional specific safety requirements and test methods
(ISO 20957-7:2024)
Appareils d'entraînement fixes - Partie 7: Rameurs - Stationäre Trainingsgeräte - Teil 7: Rudergeräte,
Exigences spécifiques de sécurité et méthodes d'essai zusätzliche besondere sicherheitstechnische
supplémentaires (ISO 20957-7:2024) Anforderungen und Prüfverfahren (ISO 20957-7:2024)
This European Standard was approved by CEN on 14 September 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20957-7:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the safety
requirements of Directive 2001/95/EC aimed to be covered . 4

European foreword
This document (EN ISO 20957-7:2024) has been prepared by Technical Committee ISO/TC 83 "Sports
and other recreational facilities and equipment" in collaboration with Technical Committee CEN/TC
136 “Sports, playground and other recreational facilities and equipment” the secretariat of which is held
by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2025, and conflicting national standards shall be
withdrawn at the latest by April 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 20957-7:2021.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
For the relationship with EU Legislation, see informative Annex ZA, which is an integral part of this
document.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 20957-7:2024 has been approved by CEN as EN ISO 20957-7:2024 without any
modification.
Annex ZA
(informative)
Relationship between this European Standard and the safety requirements
of Directive 2001/95/EC aimed to be covered
This European Standard has been prepared under a Commission’s standardization request
Standardisation mandate issued to the European standardisation organisations (ESOs) to develop
European standards for stationary training equipment “M/506” to provide one voluntary means of
conforming to the safety requirements of Commission Decision (EU) No 476/2011 of 27 July 2011
implementing General Product Safety Directive 2001/95/EC of the European Parliament and of the
Council with regard to safety requirements for stationary training equipment.
Once this standard is cited in the Official Journal of the European Union under that Directive
2001/95/EC, compliance with the normative clauses of this standard given in Table ZA.1 confers,
within the limits of the scope of this standard, a presumption of conformity with the corresponding
safety requirements of that Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Commission Decision (EU)
No 476/2011 of 27 July 2011 implementing Directive 2001/95/EC of the European Parliament
and of the Council with regard to safety requirements for stationary training equipment and
Commission’s standardization request Standardisation mandate issued to the European
standardisation organisations (ESOs) to develop European standards for stationary training
equipment ‘M/506’
Safety Requirements of Clause(s)/sub-
Remarks/Notes
EC Decision (EU) No 476/2011 clause(s) of this EN
I. Product and product definition 1; 3; 4
II. A General safety requirements 1; 5.1
II. B. Specific Safety Requirements 5.2.3; 5.2.4; 5.3; 5.6; 5.7; 5.2.3 is a specification for
5.8; 5.10 temperature rise.
(a) Stability of free-standing equipment 5.9
(b) Sharp edges and burrs —
(c) Tube ends —
(d) Squeeze, shear, rotating and 5.2.1; 5.2.2
reciprocating points within the
accessible area
(e) Weights 5.4
(f) Equipment access and escape —
(g) Adjustment and locking mechanisms —
(h) Ropes, belts and chains 5.5
(i) Wire ropes and pulleys —
(j) Rope and belt guides —
Safety Requirements of Clause(s)/sub-
Remarks/Notes
EC Decision (EU) No 476/2011 clause(s) of this EN
(k) Pull-in points —
(l) Gripping positions —
(m) Integral handgrips —
(n) Applied handgrips —
(o) Rotating handgrips —
(p) Electrical safety —
(q) Care and maintenance —
(r) Assembly instructions —
(s) General instructions for use 5.11
(t) Basic biomechanical requirements —
(u) Marking —
(v) Warnings, especially concerning risks —
for children
(w) Immobilisation unit especially for — Equipment according to
children by locking the power out this standard is not motor
driven.
II. B. Tests
(a) Dimensional check 6.1.1
(b) Visual examination 6.1.2
(c) Tactile examination 6.1.3
(d) Performance test 6.1.4
(f) Testing of pull-in points —
(h) Stability test 6.8
(i) Determination of breaking load of —
ropes, belts and chains
(j) Testing of flywheels —
(k) Determination of the removing force of —
applied handgrips
(l) Testing of access/escape —
(m) Testing of endurance load 6.7
(n) Testing of heart rate control mode
(o) Testing of accuracy of the power 6.9
readouts
(q) Test report 7
Other tests – Weighing test 6.1.5
Safety Requirements of Clause(s)/sub-
Remarks/Notes
EC Decision (EU) No 476/2011 clause(s) of this EN
Other tests – Load test of ropes 6.1.6
Other tests – Seat 6.2
Other tests – Temperature rise 6.3
Other tests – Intrinsic loading 6.4
Other tests – Foot strap 6.5
Other tests – Foot support 6.6
Other tests – Power accuracy 6.9
WARNING 1 Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 Other Union legislation may be applicable to the products falling within the scope of
this standard.
International
Standard
ISO 20957-7
Third edition
Stationary training equipment —
2024-09
Part 7:
Rowing equipment — Additional
specific safety requirements and
test methods
Appareils d’entraînement fixes —
Partie 7: Rameurs — Exigences spécifiques de sécurité et
méthodes d'essai supplémentaires
Reference number
ISO 20957-7:2024(en) © ISO 2024

ISO 20957-7:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
ISO 20957-7:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 3
4.1 General .3
4.2 Accuracy classes.3
4.3 Usage classes .4
5 Safety requirements. 4
5.1 General .4
5.2 External construction .4
5.2.1 Squeeze and shear points within the accessible area .4
5.2.2 Transmission elements and rotating parts .4
5.2.3 Temperature rise of accessible surfaces .4
5.2.4 Seat .4
5.3 Intrinsic loading .
...