Plastics - Vinyl choride homopolymer and copolymer resins - Sieve analysis in water (ISO 1624:2001)

Kunststoffe - Vinylchlorid-Homo- und Copolymerisate - Siebanalyse im Wasser (ISO 1624:2001)

Diese Internationale Norm legt ein Verfahren zur Bestimmung des Siebrückstandes und der Partikel-größenverteilung von Vinylchlorid-Homo- und Copolymerisation mit geringer Korngröße fest. Die Kontrolle dieser Eigenschaften kann dazu dienen, die Gleichmäßigkeit der Lieferungen und das voraussichtliche Verhalten bei der Verarbeitung zu sichern.

Plastiques - Résines d'homopolymères et de copolymères de chlorure de vinyle - Analyse granulométrique par tamisage sous courant d'eau (ISO 1624:2001)

L'ISO 1624 spécifie une méthode pour déterminer le refus sur tamis de résines d'homopolymères et de copolymères de chlorures de vinyle. Le contrôle de cette caractéristique peut contribuer à assurer l'homogénéité du produit livré, ainsi qu'un comportement prévisible lors de la mise en oeuvre.

Polimerni materiali - Homo- in kopolimeri vinilklorida - Sejalna analiza v vodi (ISO 1624:2001)

General Information

Status
Published
Publication Date
14-Dec-2001
Withdrawal Date
29-Jun-2002
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
15-Dec-2001
Completion Date
15-Dec-2001

Relations

Buy Standard

Standard
EN ISO 1624:2002
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1624:2002
01-september-2002
1DGRPHãþD
SIST EN ISO 1624:2000
SIST EN ISO 1624:2000/AC:1999
Polimerni materiali - Homo- in kopolimeri vinilklorida - Sejalna analiza v vodi (ISO
1624:2001)
Plastics - Vinyl choride homopolymer and copolymer resins - Sieve analysis in water
(ISO 1624:2001)
Kunststoffe - Vinylchlorid-Homo- und Copolymerisate - Siebanalyse im Wasser (ISO
1624:2001)
Plastiques - Résines d'homopolymeres et de copolymeres de chlorure de vinyle -
Analyse granulométrique par tamisage sous courant d'eau (ISO 1624:2001)
Ta slovenski standard je istoveten z: EN ISO 1624:2001
ICS:
83.080.20 Plastomeri Thermoplastic materials
SIST EN ISO 1624:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1624:2002

---------------------- Page: 2 ----------------------

SIST EN ISO 1624:2002
EUROPEAN STANDARD
EN ISO 1624
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2001
ICS 83.080.20 Supersedes EN ISO 1624:1997
English version
Plastics - Vinyl choride homopolymer and copolymer resins -
Sieve analysis in water (ISO 1624:2001)
Plastiques - Résines d'homopolymères et de copolymères Kunststoffe - Vinylchlorid-Homo- und Copolymerisate -
de chlorure de vinyle - Analyse granulométrique par Siebanalyse im Wasser (ISO 1624:2001)
tamisage sous courant d'eau (ISO 1624:2001)
This European Standard was approved by CEN on 15 December 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1624:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 1624:2002
EN ISO 1624:2001 (E)
CORRECTED  2002-09-25
Foreword
This document (ISO 1624:2001) has been prepared by Technical Committee ISO/TC 61
"Plastics" in collaboration with Technical Committee CEN/TC 249 "Plastics", the secretariat of
which is held by IBN.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by June 2002, and conflicting national
standards shall be withdrawn at the latest by June 2002.
This document supersedes EN 1624:1997.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United
Kingdom.
Endorsement notice
The text of ISO 1624:2001 has been approved by CEN as EN ISO 1624:2001 without any
modifications.
2

---------------------- Page: 4 ----------------------

SIST EN ISO 1624:2002


INTERNATIONAL ISO
STANDARD 1624
Second edition
2001-12-15


Plastics — Vinyl chloride homopolymer and
copolymer resins — Sieve analysis in water
Plastiques — Résines d'homopolymères et de copolymères de chlorure de
vinyle — Analyse granulométrique par tamisage sous courant d'eau




Reference number
ISO 1624:2001(E)
©
 ISO 2001

---------------------- Page: 5 ----------------------

SIST EN ISO 1624:2002
ISO 1624:2001(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. E
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.