Abstract

This document recommends and describes a transparent method and range of values for classifying and
comparing forms of graphene-related 2D materials (GR2M) regardless of production method or feedstock materials. This document also provides the basis for material technical data sheets which provide a framework  which can be used equally by producers, users, and regulators. The described technical data sheets contain an  agreed upon minimum set of relevant material characteristics, properties, and identified recommended methods  for testing, that have been deemed most relevant for the commercial application of GR2M. This document also  establishes a syntax to be used for the consistent naming and description for GR2M.

Status
Not Published
Publication Date
17-Mar-2027
Technical Committee
CEN/TC 352 - Nanotechnologies
Current Stage
5020 - Submission to Vote - Formal Approval
Start Date
29-Oct-2026
Due Date
10-Jun-2027
Completion Date
29-Oct-2026

Buy Documents

Draft

kTS FprCEN ISO/TS 9651:2027 - BARVE

English language (27 pages)
Preview
Preview
e-Library read for
×1 day

FprCEN ISO/TS 9651 is a CEN standard based on ISO/TS 9651:2025 for nanotechnologies. It gives a classification framework for graphene-related 2D materials (GR2M), covering sheet and particle forms, the characteristics to report, the methods used to measure them, and a syntax for consistent product naming.

The standard is meant for commercial GR2M data sheets and comparison across producers, users, and regulators. It helps users describe what the material is, how it was made, and which measurements support the claimed form and properties.

What does FprCEN ISO/TS 9651 specify?

FprCEN ISO/TS 9651 specifies how to classify and describe graphene-related 2D materials in sheet and particle forms for commercial use. It focuses on comparison and reporting, not on prescribing production or quality-control procedures.

The document is organized into:

  • Clause 1 - scope
  • Clause 2 - references used in the document
  • Clause 3 - terms and definitions
  • Clause 4 - sheet-form GR2M
  • Clause 5 - particle-form GR2M
  • Clause 6 - syntax for material description
  • Clause 7 - reporting
  • Annex A - normative classification framework
  • Bibliography - cited companion standards and background references
AnnexWhat it covers
Annex ANormative graphene-related 2D material classification framework with the characteristic values shown in a single diagram

The introduction also makes the intended use clear: the framework supports technical data sheets and market comparison, and it is not intended to define production routes.

What are the key requirements of FprCEN ISO/TS 9651?

FprCEN ISO/TS 9651 divides the material into two reporting paths - sheet form in Clause 4 and particle form in Clause 5. That split matters because the useful measurements, the sample preparation, and the preferred test methods are different for films on substrates and for powders or dispersions.

  • Production method and source material are self-reported - Clauses 4.1.1, 4.1.2, 5.1.1 and 5.1.2 ask the producer to state the production route and source material in general terms without disclosing confidential details. In practice, this gives buyers and regulators the origin of the material while avoiding unnecessary process disclosure.

  • Material form and substrate must be identified - Clauses 4.1.3 and 5.1.3 require the form to be described, such as sheet, film, powder, dispersion, slurry, paste, master batch, or pellet, and to note the substrate or dispersion medium where relevant. This is important because the same GR2M can behave very differently depending on whether it is supported, free-standing, or dispersed.

  • Sheet-form GR2M uses a defined set of physical and electrical characteristics - Clause 4.2 covers sheet size, covered area, surface residue, flake grain size, Raman-based disorder metrics, mobility, sheet resistance, structural defects, and rotational layer alignment. The practical point is that a supplier should report the measurements that show how complete the sheet is, how clean it is, and how conductive or defective it may be.

  • Particle-form GR2M uses a broader morphology-and-chemistry set - Clause 5.2 covers sp bonded carbon, structural defects, z-axis dimensions, layers of carbon atoms, particle shape, lateral particle size, aspect ratio, tap density, elemental composition, oxygen content, impurities, functionalization, zeta potential, rotational layer alignment, specific surface area, and crystallinity. This matters for powders and dispersions because buyers often need the size, layer count, surface chemistry, and stability of the particles, not just their carbon content.

  • Raman spectroscopy is central for identifying graphitic character and disorder - Clauses 4.2.2, 4.2.5, 4.2.6, 5.2.1 and 5.2.2 use Raman-based measurements to confirm graphitic material and to report disorder. In practice, the measurement setup, substrate, and laser conditions have to be recorded because the same sample can give different results under different conditions.

  • Composition and surface chemistry must be reported with suitable analytical methods - Clauses 5.2.9 to 5.2.12 cover elemental composition, oxygen content, impurities, and functionalization, using methods such as XPS, ICP-MS, TGA, FTIR, CS/ONH analysis, and related techniques. This is important because surface chemistry can change performance, dispersion behavior, and product consistency.

  • Layer count, thickness, and specific surface area are separate descriptors - Clauses 5.2.3 to 5.2.6 and 5.2.15 distinguish z-axis dimensions, number of layers, lateral size, aspect ratio, and specific surface area. The document warns against treating specific surface area as a shortcut for layer count, which helps avoid over-interpreting one measurement as a full material description.

  • Clause 6 and Clause 7 standardize how the results are presented - Clause 6 recommends a fixed syntax for a one-phrase product description, and Clause 7 provides reporting templates in Tables 1 to 6. This matters because consistent wording and layout make it easier to compare suppliers and to reuse the same information in technical data sheets.

What terms does FprCEN ISO/TS 9651 define?

  • graphene-related 2D material (GR2M) - A carbon-based two-dimensional material with one to 10 layers, including graphene, graphene oxide, reduced graphene oxide, and functionalized variations.
  • sheet - A 2D material typically on a substrate with extended lateral dimensions at the micro to macroscale.
  • flake - A distinct planar particle with thickness much smaller than its lateral dimensions.
  • particle - A minute piece of matter with defined physical boundaries.
  • functionalization - An intentional chemical change to the surface properties of the material.
  • lateral size - The lateral dimensions of a 2D material flake.
  • level of disorder - A Raman-based measure that relates D-peak and G-peak intensities to defects and disorder.
  • orientation - The crystal direction, used here for layer alignment and stacking descriptions.

Who uses FprCEN ISO/TS 9651?

FprCEN ISO/TS 9651 is used by GR2M producers, customers, testing laboratories, and regulators who need a common way to describe and compare materials. It is also useful for quality managers and procurement teams preparing technical data sheets, checking supplier claims, or comparing products from different sources.

The standard is aimed at commercial applications. That means it is most relevant when material identity, form, measured properties, and reporting consistency matter for specification, registration, or purchasing decisions.

What changed in FprCEN ISO/TS 9651 from the previous edition?

FprCEN ISO/TS 9651 is the first edition of ISO/TS 9651:2025.

Which standards are used with FprCEN ISO/TS 9651?

FprCEN ISO/TS 9651 cites these related standards in its measurement clauses and bibliography:

  • ISO/TS 21356-1 - structural characterization of graphene from powders and dispersions
  • ISO/TS 21356-2 - structural characterization of graphene sheets on a substrate
  • ISO 23359 - chemical characterization for graphene in powders and suspensions
  • ISO 9277 - BET specific surface area
  • ISO 10236 and IEC/TS 62607-6-35 - density and tapped density methods for powders
  • ISO 13099-1, ISO 13099-2, and ISO/TR 19997 - zeta potential and good practice
  • ISO 21363 - particle size and shape by TEM
  • IEC 62607-6-4, IEC 62607-6-11, IEC 62607-6-17, IEC 62607-6-19, and IEC 62607-6-21 - graphene-specific methods for surface conductance, defect density, spatial order, elemental composition, and C/O ratio
  • ASTM E1131, ASTM D5187-21, and ASTM D7481-18 - thermogravimetry, crystallinity-related XRD, and powder density methods
  • EN 13925-1 and JIS K 0131 - X-ray diffraction principles and analysis rules used as supporting references

What does the FprCEN ISO/TS 9651 document contain?

FprCEN ISO/TS 9651 contains separate measurement guidance for sheet-form and particle-form GR2M in Clauses 4 and 5. Clause 6 gives syntax figures for short product descriptions, and Clause 7 provides technical data sheet templates in Tables 1 to 6.

Annex A provides a normative diagram of the classification framework, showing the characteristic values used to describe GR2M. The document also includes example product descriptions and reporting guidance for use in technical data sheets, supplier documentation, testing records, and commercialization materials.

Buy Documents

Draft

kTS FprCEN ISO/TS 9651:2027 - BARVE

English language (27 pages)
Preview
Preview
e-Library read for
×1 day

Frequently Asked Questions

FprCEN ISO/TS 9651 is a draft published by the European Committee for Standardization (CEN). Its full title is "Nanotechnologies - Classification framework for graphene‐related 2D materials (ISO/TS 9651:2025)". This standard covers: This document recommends and describes a transparent method and range of values for classifying and comparing forms of graphene-related 2D materials (GR2M) regardless of production method or feedstock materials. This document also provides the basis for material technical data sheets which provide a framework which can be used equally by producers, users, and regulators. The described technical data sheets contain an agreed upon minimum set of relevant material characteristics, properties, and identified recommended methods for testing, that have been deemed most relevant for the commercial application of GR2M. This document also establishes a syntax to be used for the consistent naming and description for GR2M.

This document recommends and describes a transparent method and range of values for classifying and comparing forms of graphene-related 2D materials (GR2M) regardless of production method or feedstock materials. This document also provides the basis for material technical data sheets which provide a framework which can be used equally by producers, users, and regulators. The described technical data sheets contain an agreed upon minimum set of relevant material characteristics, properties, and identified recommended methods for testing, that have been deemed most relevant for the commercial application of GR2M. This document also establishes a syntax to be used for the consistent naming and description for GR2M.

FprCEN ISO/TS 9651 is classified under the following ICS (International Classification for Standards) categories: 07.120 - Nanotechnologies. The ICS classification helps identify the subject area and facilitates finding related standards.

FprCEN ISO/TS 9651 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2027
Nanotehnologije - Okvir za razvrščanje 2D-materialov, povezanih z grafenom
(ISO/TS 9651:2025)
Nanotechnologies - Classification framework for graphene‐related 2D materials (ISO/TS
9651:2025)
Nanotechnologien - Klassifizierungsrahmen für Graphen-bezogene 2D-Materialien
(ISO/TS 9651:2025)
Nanotechnologies - Cadre de classification pour les matériaux bidimensionnels similaires
au graphène (ISO/TS 9651:2025)
Ta slovenski standard je istoveten z: FprCEN ISO/TS 9651
ICS:
07.120 Nanotehnologije Nanotechnologies
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

Technical
Specification
ISO/TS 9651
First edition
Nanotechnologies — Classification
2025-07
framework for graphene‐related 2D
materials
Nanotechnologies — Cadre de classification pour les matériaux
bidimensionnels similaires au graphène
Reference number
ISO/TS 9651:2025(en) © ISO 2025

ISO/TS 9651:2025(en)
© ISO 2025
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO/TS 9651:2025(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3  Terms and definitions . 1
4 Sheet‐form graphene‐related 2D materials . 3
4.1 General .3
4.1.1 Production method .3
4.1.2 Source material .3
4.1.3 Material form and substrate .3
4.2 Characteristics and measurement methods .4
4.2.1 Sheet size .4
4.2.2 Covered area .4
4.2.3 Surface residue.4
4.2.4 Flake grain size .5
4.2.5 A /A peak ratio .5
D G
4.2.6 Full width at half maximum (FWHM) of the G and 2D peaks .6
4.2.7 Mobility .6
4.2.8 Sheet resistance .6
4.2.9 Structural defects .7
4.2.10 Rotational layer alignment .7
5 Particle‐form graphene‐related 2D materials . 7
5.1 General .7
5.1.1 Production method .7
5.1.2 Source material .8
5.1.3 Material form and substrate .8
5.2 Characteristics and measurement methods .9
5.2.1 sp bonded carbon .9
5.2.2 Structural defects .9
5.2.3 Z-Axis dimensions .9
5.2.4 Layers of carbon atoms .10
5.2.5 Particle shape .10
5.2.6 Lateral particle size .11
5.2.7 Particle aspect ratio .11
5.2.8 Tap density .11
5.2.9 Elemental composition . 12
5.2.10 Oxygen content . 12
5.2.11 Impurities . 12
5.2.12 Functionalization . 12
5.2.13 Zeta potential . 13
5.2.14 Rotational layer alignment . 13
5.2.15 Specific surface area . 13
5.2.16 Crystallinity .14
6 Syntax for material description. 14
7 Reporting .15
Annex A (normative)  Graphene-related 2D material classification framework . 19
Bibliography .21

iii
ISO/TS 9651:2025(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 229 Nanotechnologies.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

iv
ISO/TS 9651:2025(en)
Introduction
This document aims to provide commercial graphene producers and users with a standardized approach
to classifying graphene-related 2D materials. It outlines a transparent methodology for categorizing these
materials in any form, regardless of production methods or source materials. This approach facilitates
accurate and straightforward comparisons between materials from different suppliers. Additionally, the
document serves as a foundation for material specification data sheets, proposing a minimum set of relevant
data that can be consistently used by producers, users, and regulators. Material characteristics deemed
most critical for commercial applications—such as layer count, thickness, lateral flake size, disorder level,
and specific surface area—can be identified using standard testing methods and documented in material
data sheets.
The framework is primarily intended to support the creation and use of technical data sheets for specific
forms of graphene-related 2D materials. It is not designed to prescribe production procedures or quality
control testing processes, although some of the described test methods can serve as supporting techniques
for those purposes.
Establishing a systematic classification framework for graphene-related 2D materials is essential for
several key reasons. First, it ensures consistent and reliable regulation and registration processes,
fostering transparency and trust in the market for both producers and users. Second, it enables a thorough
understanding and quantification of material properties, forms, and contaminants. Finally, the adoption
of universal standardized testing methods is critical for enabling easy, quantitative comparisons of data
generated by different laboratories and users globally. This systematic approach will significantly advance
the responsible development and use of graphene-related 2D materials.
It is also important to note that certain test methods are possibly not suitable for all forms of graphene-
related 2D materials. When employing standardized testing methods, it is beneficial to provide multiple
measurement techniques for evaluating different properties. However, these methods can yield varying
results for the same sample due to differences in how each technique assesses specific aspects of the
material.
NOTE This document is derived from Reference [25] use of which has been licensed to ISO by the Graphene
Council (https://www.thegraphenecouncil.org).

v
Technical Specification ISO/TS 9651:2025(en)
Nanotechnologies — Classification framework for graphene-
related 2D materials
1 Scope
This document specifies the characteristics and their respective measurement methods of graphene-related
2D materials in sheet and particle forms for commercial applications with the aim of classification of the
materials. The classification framework consists of the following elements:
a) relevant material characteristics for commercial use;
b) identification of applicable measurement methods;
c) a range of the characteristic measured values when applicable;
d) syntax to guide consistent naming and descriptions;
e) an applicable technical data sheet template.
2 Normative references
There are no normative references in this document.
3  Terms and definitions
For the purposes of this document, the following terms and definitions apply:
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1
graphene‐related 2D material
GR2M
DEPRECATED: graphene-based material, graphene-material
carbon-based two-dimensional material consisting of one to 10 layers, including graphene, graphene oxide,
reduced graphene oxide, and functionalized variations thereof
Note 1 to entry: This includes bilayer graphene, trilayer graphene and few-layer graphene.
Note 2 to entry: The terms graphene-based material and graphene-material are deprecated here. They have been used
to describe materials other than graphene, such as graphene oxide.
Note 3 to entry: "Graphene-related 2D material" is defined in contrast with graphene-based and GR2M-based.
[SOURCE: ISO/TS 80004-13, 3.1.1.2]
3.2
sheet
2D material typically situated upon a substrate, with extended lateral dimensions at the micro to macroscale
[SOURCE: ISO/TS 80004-13, 3.1.1.4]

ISO/TS 9651:2025(en)
3.3
flake
distinct particle of planar morphology, consisting of 1 or more layers, with a nanoscale thickness that is
significantly less than its lateral dimensions.
[SOURCE: ISO/TS 80004-13, 3.1.1.3]
3.4
particle
minute piece of matter with defined physical boundaries
Note 1 to entry: A physical boundary can also be described as an interface.
Note 2 to entry: This general particle definition applies to nano-objects.
[SOURCE: ISO 80004-1, 3.1.1]
3.5
coating
adherent surface layer
Note 1 to entry: A coating can consist of multiple layers.
Note 2 to entry: A coating is always attached to a substrate
[SOURCE: ISO 4618:2023, 2.244]
3.6
film
supported or unsupported thin material that is laterally continuously connected
Note 1 to entry: The attribute “thin” is used to emphasize that the thickness of the film is much smaller than the other
two dimensions.
Note 2 to entry: A film can be freestanding.
Note 3 to entry: A film can be made of solids or liquids (e.g. liquid film).
Note 4 to entry: A film can be composed of a monomolecular layer (e.g. Langmuir-Blodgett film).
[SOURCE: ISO/TS 80004-1, 3.1.1]
3.7
functionalization
process that intentionally alters the surface chemical properties through a distinct chemical
Note 1 to entry: functionalized material should then be referred to as "functionalized X", where X refers to the material
such as graphene, graphene nanoplatelet, etc.
[SOURCE: ISO/TS 80004-13, 3.1.1.17]
3.8
lateral size
<2D material> lateral dimensions of a 2D material flake
Note 1 to entry: If the flake is approximately circular, then this is typically measured using an equivalent circular
diameter or if not via x, y measurements along and perpendicular to the longest side.
[SOURCE: ISO/TS 80004-13:2024, 3.4.1.15]

ISO/TS 9651:2025(en)
3.9
orientation
direction of crystal which is represented by crystal index
Note 1 to entry: During TEM imaging, it is often useful to have a crystalline specimen aligned such that a specific (low
index) zone axis is parallel, or nearly parallel, to the beam direction optical axis.
[SOURCE: ISO 29301:2023, 3.5]
3.10
level of disorder
quantification of the disorder present in a GR2M given by the ratio of the
Raman D peak and G peak intensities as measured by Raman spectroscopy, representing a combination of
the amount, size and type of defects
Note 1 to entry: This can be method dependent where different instrument configurations can give different results.
Note 2 to entry: The peak intensities can be measured using area or height depending on which is most relevant.
[SOURCE: ISO 80004-13, 3.4.1.10]
4 Sheet‐form graphene‐related 2D materials
4.1 General
4.1.1 Production method
The GR2M producer should report the production method in general terms without disclosing confidential
information. This is a "self-reported and labelled” item for which there is no independent testing. Examples
include chemical vapor deposition (CVD), spin coating, spin on layer, etc.
4.1.2 Source material
The GR2M producer should report the source material used in production, without disclosing confidential
information. Examples include, from methane, acetylene, etc. Therefore, the test method is "self-reported
and labelled”.
4.1.3 Material form and substrate
The form of GR2M should be assessed by visual observation. The form of material defined in this section is
categorized as sheets. The producer may specify whether the material provided is on a substrate.
The transfer process used, if any, from the production substrate to the substrate delivered to the customer
should be categorized. Examples include chemical etching, oxidative decoupling, electrochemical
delamination, direct growth, etc.
This is a self-reported value from the producer.
This section should also describe the substrate material (copper, silicon, nickel, PET, etc.) Example:
monolayer graphene film on a silicon wafer.

ISO/TS 9651:2025(en)
4.2 Characteristics and measurement methods
4.2.1 Sheet size
4.2.1.1  Definition
The dimensions of the sheet are measured from edge to edge along the x and y axes to determine the length
and width. Materials are typically reported as a quadrangle but can be circular or irregular in shape. The
[10]
applicable standard is ISO/TS 21356-2.
4.2.1.2 Measurement methods
Measurement methods include optical microscopy, scanning electron microscopy (SEM), atomic force
microscopy (AFM) and Raman spectroscopy; however optical microscopy is the recommended method,
when measuring GR2M.
4.2.1.3 Measurement results
The measurement results shall be expressed as the average or distribution of sheet sizes, as required. The
units of the results shall be cm, mm, μm, or nm. If the flake is approximately circular then this is typically
measured using an equivalent circular diameter or if not via x, y measurements along and perpendicular to
the longest side. The thickness of the oxide layer on the substrate is crucial for optical contrast.
4.2.2 Covered area
4.2.2.1  Definition
The substrate's coverage in lateral dimensions is expressed as the percent of the area covered by a single
layer, the percent of the area covered by a multi-layer (including the number of layers), and the percent of the
area comprised of defects.
4.2.2.2 Measurement methods
The determination of the sample containing graphene or graphitic material, that is bilayer graphene, flake
like graphene, graphene nanoparticles or graphite, is done using Raman spectroscopy. Other measurement
methods include optical microscopy, SEM, and AFM. For powder samples, disperse them in a solvent
concentration of approximately 0,1 mg/ml. If the sample is already in dispersion, dilute it to approximately
0,1 mg/ml using the same solvent or mixture. To decide which methods to use, refer to the applicable
[9] [10]
standards ISO/TS 21356-1 and ISO/TS 21356-2 .
4.2.2.3 Measurement results
The measurements results shall be expressed as the required average or distribution of sheet sizes, and the
size of the sample used for testing must also be reported. The measurement results shall be expressed as a
−1
percentage. To confirm the presence of graphene or graphite, a sharp [< 30 cm full width at half maximum
−1 −1
(FWHM)] G-peak at ~1 580 cm and a 2D-peak at ~2 700 cm should be consistently observed in the
Raman spectra.
NOTE Expected values for commercial-grade material are usually more than 95 % monolayer coverage (i.e., 5 %
or less defective or multilayer material). Similar values are usually expected for materials intentionally produced as
bilayer or trilayer films.
4.2.3 Surface residue
4.2.3.1  Definition
Surface residue is defined as any particles or substances that are observed on the surface of the graphene
that are not intentionally placed or desired and are possibly the result of a transfer or other processing step.

ISO/TS 9651:2025(en)
It can also be considered as a contaminant. The amount of surface residue present on the material should be
expressed as a percent of the total area that is covered by residue.
4.2.3.2 Measurement methods
Measurement methods are optical microscopy and Raman spectroscopy. For powder samples, disperse them
in a solvent concentration of approximately 0,1 mg/ml. If the sample is already in dispersion, dilute it to
approximately 0,1 mg/ml using the same solvent or mixture. A thin layer of powder is required for this rapid
Raman spectroscopy analysis step. If a powder has been provided, this should be analyzed with a significant
amount of the sample secured on adhesive tape such that only the flakes rather than the substrate are
[9] [10]
analyzed. The applicable standards are ISO/TS 21356-1 and ISO/TS 21356-2 .
4.2.3.3 Measurement results
The values expected are <5 % of the area covered with residue. The percentage of the area covered by
residue should be reported.
4.2.4 Flake grain size
4.2.4.1  Definition
The flake grain size refers to the size of domains with the same crystallographic orientation. This
measurement is typically determined through microscopic analysis.
4.2.4.2 Measurement methods
Measurement methods are AFM, scanning tunnelling microscopy (STM), optical microscopy, SEM, and
[9]
transmission electron microscopy (TEM). The applicable standard is ISO/TS 21356-1 .
4.2.4.3 Measurement results
Values should be reported with values at the nm or μm scale.
NOTE Expected values range widely (from 100 nm to 100 µm) and are highly dependent on the intended
application. Values of >50 micron are expected.
4.2.5 A /A peak ratio
D G
4.2.5.1  Definition
The ratio of the integrated area of the D peak to the integrated area of the G peak in Raman spectroscopy can
be a metric to assess the degree of disorder or defects in carbon-based materials. A larger A /A peak ratio
D G
can indicate a higher degree of disorder. In comparison, a lower ratio suggests a more ordered structure.
4.2.5.2 Measurement methods
The measurement method is Raman spectroscopy.
4.2.5.3 Measurement results
The values of a Raman spectroscopy measurement of the material should be reported as the ratio of the
integrated area of the D to G peaks. Substrates and laser conditions can affect these values and therefore
should be listed.
ISO/TS 9651:2025(en)
4.2.6 Full width at half maximum (FWHM) of the G and 2D peaks
4.2.6.1  Definition
The FWHM of the G and 2D peaks in Raman spectroscopy is a measure of sample quality or crystallinity. It is
calculated by fitting the observed peaks to extract the FWHM.
4.2.6.2 Measurement methods
−1
The measurement method is Raman spectroscopy. The G peak (~1 580 cm spectral position) and the
−1
2D-peak (~2 700 cm ) should be extracted for separate analysis. Determine and subtract a baseline for
each area of interest, then fit Lorentzian peak shapes to the G- and 2D-peaks. A Voight fit (which contains
both Lorentzian and Gaussian functions), can be necessary in some samples. The applicable standards are
[9]
ISO/TS 21356-1 .
4.2.6.3 Measurement results
The values of a Raman spectroscopy measurement of the material should be reported as the FWHM of the G
and 2D peaks. Values can vary depending on substrate, multilayer coverage, strain, doping, laser excitation
wavelength and post processing.
4.2.7 Mobility
4.2.7.1  Definition
The ability of charge carriers (electrons and
...