Automatic forced draught burners for liquid fuels

This European Standard specifies the terminology, the general requirements for the construction and operation of automatic forced draught oil burners and also the provision of control and safety devices, and the test procedure for these burners.
This European Standard applies to automatic forced draught oil burners supplied with:
-   a fuel having a viscosity at the burner inlet of 1,6 mm²/s (cSt) up to 6 mm²/s (cSt) at 20 °C; and
-   higher boiling petroleum based first raffinates (viscosity greater than 6 mm2/s), that require preheating for proper atomisation.
This European Standard is applicable to:
-   single burners fitted to a single combustion chamber;
-   single burners fitted to an appliance with additional requirements, then the relevant standard of this appliance shall be taken into account;
-   single-fuel and dual-fuel burners when operating on oil only;
-   the oil function of dual-fuel burners designed to operate simultaneously on gaseous and liquid fuels, in which case the requirements of EN 676 will also apply in respect of the gaseous fuel function.
This European Standard deals with all significant machine hazards, hazardous situations and events relevant to burners, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, see Annex J.
It deals with the additional requirements for the burners in the scope with pressurised parts and/or firing pressurised bodies, see Annex K.
This European Standard specifies the requirements to be met by the manufacturer to ensure the safety during commissioning, start-up, operation, shut-down and maintenance.
This European Standard does not deal with hazards due to specific applications.
This European Standard deals also with forced draught burners intended to be used with biogenous fuels, mixtures.
This European Standard deals also with burners equipped to increase the total appliance efficiency; see Annex L.

Automatische Brenner mit Gebläse für flüssige Brennstoffe

Brûleurs automatiques à air soufflé pour combustibles liquides

Ventilatorski gorilniki za tekoča goriva

General Information

Status
Not Published
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
20-Jun-2011
Due Date
26-Feb-2012
Completion Date
20-Jun-2011

Relations

Buy Standard

Draft
EN 267:2010/kFprA1:2011
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2011
9HQWLODWRUVNLJRULOQLNL]DWHNRþDJRULYD
Automatic forced draught burners for liquid fuels
Automatische Brenner mit Gebläse für flüssige Brennstoffe
Brûleurs automatiques à air soufflé pour combustibles liquides
Ta slovenski standard je istoveten z: EN 267:2009/FprA1
ICS:
27.060.10 *RULOQLNLQDWHNRþHLQWUGR Liquid and solid fuel burners
JRULYR
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
FINAL DRAFT
EN 267:2009
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
January 2011
ICS 27.060.10
English Version
Automatic forced draught burners for liquid fuels
Brûleurs automatiques à air soufflé pour combustibles Automatische Brenner mit Gebläse für flüssige Brennstoffe
liquides
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 47.
This draft amendment A1, if approved, will modify the European Standard EN 267:2009. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

EUROPEA
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.