EN ISO 10545-1:1997

Ceramic tiles - Part 1: Sampling and basis for acceptance (ISO 10545-1:1995)

Specifies rules for batching, sampling, inspection and acceptance/rejection of ceramic tiles.

Keramische Fliesen und Platten - Teil 1: Probenahme und Grundlagen für die Annahme (ISO 10545-1:1995)

Dieser Teil von ISO 10545 legt Regeln für Auswahl, Probenhame, Überprüfung und Annahme/Ablehnung keramischer Fliesen und Platten fest.

Carreaux et dalles céramiques - Partie 1: Echantillonnage et conditions de réception (ISO 10545-1:1995)

La présente partie de l'ISO 10545 prescrit des règles pour la constitution des lots, l'échantillonnage, le contrôle, l'acceptation et le rejet des carreaux et dalles céramiques.

Keramične ploščice - 1. del: Vzorčenje in osnove za sprejem

General Information

• Status: Withdrawn
• Publication Date: 22-Jul-1997
• Withdrawal Date: 14-Oct-2014
• ICS: 91.100.25 - Terracotta building products
• Technical Committee: CEN/TC 67 - Ceramic tiles
• Drafting Committee: CEN/TC 67 - Ceramic tiles
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 15-Oct-2014
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN ISO 10545-1:1998 - Ceramic tiles - Part 1: Sampling and basis for acceptance (ISO 10545-1:1995)

Relations

• Replaced By: EN ISO 10545-1:2014 - Ceramic tiles - Part 1: Sampling and basis for acceptance (ISO 10545-1:2014)
• Effective Date: 27-Feb-2013

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-1998
.HUDPLþQHSORãþLFHGHO9]RUþHQMHLQRVQRYH]DVSUHMHP
Ceramic tiles - Part 1: Sampling and basis for acceptance (ISO 10545-1:1995)
Keramische Fliesen und Platten - Teil 1: Probenahme und Grundlagen für die Annahme
(ISO 10545-1:1995)
Carreaux et dalles céramiques - Partie 1: Echantillonnage et conditions de réception
(ISO 10545-1:1995)
Ta slovenski standard je istoveten z: EN ISO 10545-1:1997
ICS:
91.100.23 .HUDPLþQHSORãþLFH Ceramic tiles
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

INTERNATIONAL
ISO
STANDARD
10545-1
First edition
1995-11-15
Ceramic tiles - .
Part 1:
Sampling and basis for acceptance
Carreaux et dalles ckamiques -
Partie 1: Echan tillonnage et conditions de rkeption
Reference number
ISO 10545-1 :1995(E)
ISO 10545=1:1995(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 10545-1 was prepared by Technical Committee
lSO/TC 189, Ceramic He.
ISO 1 0545 consists of the following Parts, under the general title Ceramic
tiles:
- Part 1: Sampling and basis for acceptance
- Part 2: Determination of dimensions and surface quality
- Part 3: Determination of water absorption, apparen t porosity, appar-
ent relative density and bulk density
- Part 4: Determination of modulus of rupture and breaking strength
- Part 5: Determination of impact resistance by measurement of co-
efficient of restitution
- Part 6: Determination of resistance to deep abrasion for unglazed
tiles
- Part 7: Determination of resistance to surface abrasion for glazed
tiies
- Part 8: Determination of linear thermal expansion
0 ISO 1995
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, including photocopying and
microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-l 211 Geneve 20 l Switzerland
Printed in Switzerland
ISO 10545=1:1995(E)
0 ISO
- Part 9: Determination of resistance to thermal shock
- Part IO: Determination of moisture expansion
- Part ? 1: Determination of crazing resistance for glazed tiles
- Part 12: Determination of frost resistance
- Part 13: Determination of Chemical resistance
- Part 14: Determination of resistance to stains
- Part 15: Determination of lead and Cadmium gien off by glazed tiles
- Part 16: Determination of small colour differentes
- Part ? 7: Determination of coefficien t of friction
. . .
Ill
This page intentionally left blank

ISO 10545=1:1995(E)
INTERNATIONAL STANDARD 0 ISO
Ceramic tiles -
Part 1: i
Sampling atid basis for acceptance
1 Scope 3 Principle
This patt of ISO 10545 specifies rules for batching, This part of ISO 10545 provides for a sampling in-
sampling, inspection and acceptance/rejection of cer- spection System with a double sampling plan, partly
for the method of inspection by attributes (individual
amic tiles.
values) and partly for a method of inspection by aver-
age values (variables).
2 Definitions
The number of tiles to be tested varies for each
For the purposes of this part of ISO 10545, the fol-
property (see table 1).
lowing definitions apply.
2.1 Order: Quantity of tiles ordered at one time. An
4 Constitution of inspection lots
Order may consist of one or more consignments.
An inspection lot may consist of one or more homo-
2.2 consignment: Quantity of tiles delivered during
geneous consignments or subconsignments.
a period of 2 days.
Any consignment which is not homogeneous shall be
2.3 homogeneous (sub)consignment: divided into subconsignments which are assumed to
(Sub)
be homogeneous and which may then constitute in-
consignment that consists of tiles from one manu-
spection lots.
facturer, produced under conditions and with proper-
ties that are presumed uniform.
If non-homogeneity is not relevant to the properties
to be tested, by agreement between the supplier and
2.4 inspection lot: Quantity of tiles submitted for
consumer, the consignment tan be treated as homo-
inspection manufactured by one manufacturer under
geneous.
conditions and with properties that are presumed
uniform.
For example, a consignment of tiles, of the Same
NOTE 1
type with different glazes, tan be homogeneous with regard
2.5 Sample: Specified number of tiles taken from an
to dimensions and water absorption and non-homogeneous
inspection lot.
with regard to surface quality. In the same way, accessories
which differ only in shape from the remaining tiles in the
2.6 Sample size: Number of tiles to be tested for
Sample may be considere
...