EN ISO 22391-1:2009
(Main)Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General (ISO 22391-1:2009)
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General (ISO 22391-1:2009)
ISO 22391-1:2009 specifies the general characteristics of piping systems made of polyethylene of raised temperature resistance (PE‑RT), Type I and polyethylene of raised temperature resistance (PE-RT), Type II intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not the water is intended for human consumption (domestic systems) and for heating systems, under specified design pressures and temperatures appropriate to the class of application.
ISO 22391-1:2009 covers a range of service conditions (classes of application), design pressures and pipe dimension classes, and also specifies test parameters and defines terms. In conjunction with the other parts of ISO 22391, it is applicable to PE-RT pipes, fittings, their joints and to joints having components of PE-RT, as well as of other plastics and non-plastics materials, respectively, used for hot and cold water installations.
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polyethylen erhöhter Temperaturbeständigkeit (PE-RT) - Teil 1: Allgemeines (ISO 22391-1:2009)
Dieser Teil von ISO 22391 legt die allgemeinen Anforderungen an Rohrleitungssysteme aus
Polyethylen erhöhter Temperaturbeständigkeit (PE RT), Typ I und
Polyethylen erhöhter Temperaturbeständigkeit (PE RT), Typ II
fest, die in der Warm und Kaltwasserinstallation innerhalb von Gebäuden für den Transport von Wasser Trink oder Brauchwasser (Hausinstallation) und für Heizungsanlagen bei festgelegten zulässigen Betriebsdrücken und temperaturen entsprechend der jeweiligen Anwendungsklasse eingesetzt werden.
Dieser Teil von ISO 22391 enthält eine Reihe von Betriebsbedingungen (Anwendungsklassen), zulässigen Betriebsdrücken und Rohrabmessungsklassen und legt auch Prüfparameter fest und definiert Begriffe. Zusammen mit den anderen Teilen von ISO 22391 gilt dieser Teil entsprechend für PE RT Rohre, Formstücke, deren Verbindungen untereinander, sowie für Verbindungen mit Bauteilen aus PE RT und anderen Kunststoffen sowie anderen Werkstoffen, die in der Warm und Kaltwasserinstallation angewendet werden.
Er gilt nicht für Werte für die Berechnungstemperatur, die maximale Berechnungstemperatur oder Störfall-temperatur, die über die in ISO 22391 1 festgelegten Werte hinausgehen.
ANMERKUNG Der Anwender oder Auftraggeber ist unter Berücksichtigung der eigenen Anforderungen sowie der geltenden nationalen Festlegungen und Verlegeverfahren oder Codes für die entsprechende Auswahl dieser Kriterien verantwortlich.
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylène de meilleure résistance à la température (PE-RT) - Partie 1: Généralités (ISO 22391-1:2009)
L'ISO 22391-1:2009 spécifie les aspects généraux des systèmes de canalisations en polyéthylène de meilleure résistance à la température (PE‑RT), Type I, et en polyéthylène de meilleure résistance à la température (PE‑RT), Type II, destinés aux installations d'eau chaude et froide à l'intérieur des bâtiments ainsi qu'au transport de l'eau, destinée ou non à la consommation humaine (systèmes domestiques) et aux installations de chauffage, à des pressions et des températures de service spécifiées correspondant à la classe d'application.
L'ISO 22391-1:2009 couvre une gamme de conditions de service (classes d'application), de pressions de service et de classes de dimension du tube, et spécifie également les paramètres d'essai et définit les termes. Lorsqu'elle est utilisée conjointement avec les autres parties de l'ISO 22391, elle s'applique respectivement aux tubes PE‑RT, aux raccords, à leurs assemblages et aux assemblages ayant des composants de PE‑RT, ainsi qu'à d'autres matériaux, plastiques ou non plastiques, utilisés pour les installations d'eau chaude et froide.
Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo - Polietilen s povišano temperaturno odpornostjo (PE-RT) - 1. del: Splošno (ISO 22391-1:2009)
Ta del ISO 22391 določa splošne značilnosti cevnih sistemov, narejenih iz – polietilena s povišano temperaturno odpornostjo (PE-RT), tip I, in – polietilena s povišano temperaturno odpornostjo (PE-RT), tip II, ki se uporabljajo za napeljave z vročo in hladno vodo v stavbah za prenos vode, ne glede na to, ali je voda namenjena za prehrano ljudi (gospodinjski sistemi) in grelne sisteme, pod posebnimi računskimi tlaki in pri temperaturah, primernih za razred uporabe. Ta del ISO 22391 zajema razpon pogojev delovanja (razredov uporabe) računskih tlakov in razredov dimenzij cevi ter določa preskusne parametre in opredeljuje izraze. V povezavi z drugimi deli ISO 22391 velja za cevi, fitinge in njihove spojnice iz polietilena s povišano temperaturno odpornostjo ter spojnice, ki imajo komponente iz polietilena s povišano temperaturno obstojnostjo in iz drugih polimernih in nepolimernih materialov, ki se uporabljajo za napeljave z vročo in hladno vodo.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2010
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY]DQDSHOMDYH]YURþRLQKODGQRYRGR
3ROLHWLOHQVSRYLãDQRWHPSHUDWXUQRRGSRUQRVWMR 3(57 GHO 6SORãQR ,62
Plastics piping systems for hot and cold water installations - Polyethylene of raised
temperature resistance (PE-RT) - Part 1: General (ISO 22391-1:2009)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polyethylen
erhöhter Temperaturbeständigkeit (PE-RT) - Teil 1: Allgemeines (ISO 22391-1:2009)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide -
Polyéthylène de meilleure résistance à la température (PE-RT) - Partie 1: Généralités
(ISO/FDIS 22391-1:2009)
Ta slovenski standard je istoveten z: EN ISO 22391-1:2009
ICS:
23.040.01 Deli cevovodov in cevovodi Pipeline components and
na splošno pipelines in general
91.140.60 Sistemi za oskrbo z vodo Water supply systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 22391-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2009
ICS 23.040.01; 91.140.60; 93.025
English Version
Plastics piping systems for hot and cold water installations -
Polyethylene of raised temperature resistance (PE-RT) - Part 1:
General (ISO 22391-1:2009)
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für die Warm- und
installations d'eau chaude et froide - Polyéthylène de Kaltwasserinstallation - Polyethylen erhöhter
meilleure résistance à la température (PE-RT) - Partie 1: Temperaturbeständigkeit (PE-RT) - Teil 1: Allgemeines
Généralités (ISO 22391-1:2009) (ISO 22391-1:2009)
This European Standard was approved by CEN on 4 November 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22391-1:2009: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 22391-1:2009) has been prepared by Technical Committee ISO/TC 138 "Plastics
pipes, fittings and valves for the transport of fluids" in collaboration with Technical Committee CEN/TC 155
“Plastics piping systems and ducting systems” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at
the latest by June 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 22391-1:2009 has been approved by CEN as a EN ISO 22391-1:2009 without any
modification.
INTERNATIONAL ISO
STANDARD 22391-1
Second edition
2009-12-01
Plastics piping systems for hot and cold
water installations — Polyethylene of
raised temperature resistance (PE-RT) —
Part 1:
General
Systèmes de canalisations en plastique pour les installations d'eau
chaude et froide — Polyéthylène de meilleure résistance à la
température (PE-RT) —
Partie 1: Généralités
Reference number
ISO 22391-1:2009(E)
©
ISO 2009
ISO 22391-1:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2009 – All rights reserved
ISO 22391-1:2009(E)
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Normative references.1
3 Terms, definitions, symbols and abbreviated terms .2
3.1 Terms and definitions .2
3.2 Symbols.5
3.3 Abbreviated terms .6
4 Classification of service conditions.7
5 Material .8
5.1 General .8
5.2 Influence on water intended for human consumption .8
5.3 Reprocessable material .8
6 System performance requirement .8
Bibliography.9
ISO 22391-1:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 22391-1 was prepared by Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for the
transport of fluids, Subcommittee SC 2, Plastics pipes and fittings for water supplies.
This second edition cancels and replaces the first edition (ISO 22391-1:2007), which is extended from only
dealing with PE-RT material (referred to as Type I) to cover PE-RT materials Type I and Type II.
1)
ISO 22391 consists of the following parts , under the general title Plastics piping systems for hot and cold
water installations — Polyethylene of raised temperature resistance (PE-RT):
⎯ Part 1: General
⎯ Part 2: Pipes
⎯ Part 3: Fittings
⎯ Part 5: Fitness for purpose of the system
1) This System Standard does not incorporate a Part 4: Ancillary equipment or a Part 6: Guidance for installation. For
ancillary equipment, separate standards can apply. Guidance for installation of plastics piping systems made from different
materials, intended to be used for hot and cold water installations, is covered by ENV 12108.
iv © ISO 2009 – All rights reserved
ISO 22391-1:2009(E)
Introduction
The System Standard, of which this is Part 1, specifies the requirements for a piping system and its
components when made from polyethylene of raised temperature resistance (PE-RT). The piping system is
intended to be used for hot and cold water installations.
In respect of potential adverse effects on the quality of water intended for human consumption caused by the
products covered by ISO 22391, the following are relevant.
a) This part of ISO 22391 provides no information as to whether the products can be used without restriction.
b) Existing national regulations concerning the use and/or characteristics of the products remain in force.
This part of ISO 22391 specifies the general aspects of the plastics piping system. At the date of publication of
this part of ISO 22391, System Standards Series for piping systems of other plastics materials used for the
same application are the following:
ISO 15874 (all parts), Plastics piping systems for hot and cold water installations — Polypropylene (PP)
ISO 15875 (all parts), Plastics piping systems for hot and cold water installations — Crosslinked polyethylene
(PE-X)
ISO 15876 (all parts), Plastics piping systems for hot and cold water installations — Polybutylene (PB)
ISO 15877 (all parts), Plastics piping systems for hot and cold water installations — Chlorinated
poly(vinyl chloride) (PVC-C)
INTERNATIONAL STANDARD ISO 22391-1:2009(E)
Plastics piping systems for hot and cold water installations —
Polyethylene of raised temperature resistance (PE-RT) —
Part 1:
General
1 Scope
This part of ISO 22391 specifies the general characteristics of piping systems made of
⎯ polyethylene of raised temperature resistance (PE-RT), Type I, and
⎯ polyethylene of raised temperature resistance (PE-RT), Type II,
intended to be used for hot and cold water installations within buildings for the conveyance of water, whether
or not the water is intended for human consumption (domestic systems) and for heating systems, under
specified design pressures and temperatures appropriate to the class of application.
This part of ISO 22391 covers a range of service conditions (classes of application), design pressures and
pipe dimension classes, and also specifies test parameters and defines terms. In conjunction with the other
parts of ISO 22391, it is applicable to PE-RT pipes, fittings, their joints and to joints havi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.