EN 14399-1:2005

High-strength structural bolting assemblies for preloading - Part 1: General requirements

This Part of this European standard specifies the general requirements for the components of bolt/nut/washer(s) assemblies for high-strength structural bolting, which are suitable for preloading and for the assemblies themselves.
NOTE   The specific requirements for the systems HR and HV and the associated washers are given in the following parts of this European standard:

Hochfeste planmäßig vorspannbare Schraubenverbindungen für den Metallbau - Teil 1: Allgemeine Anforderungen

Der vorliegende Teil dieser Europäischen Norm legt die allgemeinen Anforderungen an die Komponenten von Garnituren aus Schrauben, Muttern und Scheiben für hochfeste Schraubenverbindungen für den Stahlbau fest, die zum Vorspannen geeignet sind, sowie an die Garnituren selbst.
ANMERKUNG   Die besonderen Anforderungen an die Systeme HR und HV sowie die zugehörigen Scheiben sind in den folgenden Teilen dieser Europäischen Norm festgelegt:

Boulonnerie de construction métallique à haute résistance apte à la précontrainte - Partie 1: Exigences générales

La présente partie de cette Norme européenne spécifie les exigences générales relatives aux éléments constitutifs des ensembles (vis+écrou+rondelle(s)) pour boulons de construction à haute résistance aptes à la précontrainte ainsi qu'aux ensembles eux-mêmes.
NOTE   Les exigences spécifiques pour les systèmes HR et HV et les rondelles associées sont définies dans les parties suivantes de cette Norme européenne

Visokotrdnostne strukturne vijačne zveze za prednapetje - 1. del: Splošne zahteve

General Information

• Status: Withdrawn
• Publication Date: 15-Mar-2005
• Withdrawal Date: 17-Feb-2015
• ICS: 21.060.01 - Fasteners in general
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 18-Feb-2015
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/120 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on structural metallic products and ancillaries
• Ref Project: SIST EN 14399-1:2005 - High-strength structural bolting assemblies for preloading - Part 1: General requirements

Relations

• Replaced By: EN 14399-1:2015 - High-strength structural bolting assemblies for preloading - Part 1: General requirements
• Effective Date: 25-Feb-2015

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hochfeste planmäßig vorspannbare Schraubenverbindungen für den Metallbau - Teil 1: Allgemeine AnforderungenBoulonnerie de construction métallique a haute résistance apte a la précontrainte - Partie 1: Exigences généralesHigh-strength structural bolting assemblies for preloading - Part 1: General requirements21.060.01Vezni elementi na splošnoFasteners in generalICS:Ta slovenski standard je istoveten z:EN 14399-1:2005SIST EN 14399-1:2005en01-maj-2005SIST EN 14399-1:2005SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14399-1March 2005ICS 21.060.01English versionHigh-strength structural bolting assemblies for preloading - Part1: General requirementsBoulonnerie de construction métallique à haute résistanceapte à la précontrainte - Partie 1: Exigences généralesGarnituren für hochfeste planmäßig vorspannbareSchraubenverbindungen für den Metallbau - Teil 1:Allgemeine AnforderungenThis European Standard was approved by CEN on 3 February 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14399-1:2005: ESIST EN 14399-1:2005

Clauses of this European Standard addressing the provisions of EU Construction Products Directive (89/106/EEC).17 Bibliography.22
Bolt/nut/washer assembly System HR Bolt/nut/washer assembly System HV General require-ments EN 14399-1 Bolt/nut assembly EN 14399-3 EN 14399-4 Marking HR HV Property classes 8.8/8 10.9/10 10.9/10 Washer(s) EN 14399-5 or EN 14399-6 EN 14399-5 or
EN 14399-6 Marking H H Suitability test for preloading EN 14399-2 EN 14399-2
Preloaded bolted assemblies are very sensitive to differences in manufacture and lubrication. Therefore it is important that the assembly is supplied by one manufacturer who is always responsible for the function of the assembly. For the same reason it is important that coating of the assembly is under the control of one manufacturer. Beside the mechanical properties of the components the functionality of the assembly requires that the specified preload can be achieved if the assembly is tightened with a suitable procedure. For this purpose a test method for the suitability of the components for preloading was created which will demonstrate whether the function of the
assembly is fulfilled. For the time being, the product standards EN 14399-3 to EN 14399-6 are the only European Standards which have regard to the general requirements of EN 14399-1. However, further product standards on  fit bolts,  countersunk head bolts, and  load indicating washers for the use in high strength structural bolting for preloading are under preparation. SIST EN 14399-1:2005

EN ISO 9001, Quality management systems — Requirements (ISO 9001:2000). 3 Terms and definitions For the purposes of this document, the terms and definitions given in Guide to the Implementation of Directives Based on the New Approach and Global Approach and ENV 1090-1:1996 and the following apply. 3.1 assembly comprises matching bolt, nut and necessary washer(s) SIST EN 14399-1:2005

1) Size of a bolt means thread diameter and length. SIST EN 14399-1:2005
...