EN 14500:2008

Blinds and shutters - Thermal and visual comfort - Test and calculation methods

This European Standard defines test and calculation methods for the determination of the reflection and transmission characteristics to be used to determine the thermal and visual comfort performance classes of external blinds, internal blinds and shutters, as specified in EN 14501.
This European Standard also specifies the method to determine opacity characteristics of dim-out/black-out external blinds, internal blinds and shutters, as specified in EN 14501.
This European Standard applies to the whole range of shutters, awnings and blinds defined in EN 12216, described as solar protection devices in this European Standard. Some of the characteristics (e.g. gtot) are not applicable when products are not parallel to the glazing (e.g. folding-arm awnings).
NOTE   Informative Annex D presents an approach for the determination of characteristics in case of projectable products.
Products using fluorescent or retroreflecting materials are outside the scope of this European Standard.

Abschlüsse - Thermischer und visueller Komfort - Prüf- und Berechnungsverfahren

Diese Europäische Norm definiert Prüf  und Berechnungsverfahren zur Bestimmung der Reflexions  und Transmissionskenngrößen, die anzuwenden sind, um die Leistungsklassen von innen und außen liegenden Abschlüssen hinsichtlich des thermischen und visuellen Komforts nach den Festlegungen in EN 14501 zu bestimmen.
Diese Europäische Norm legt auch das Verfahren zur Bestimmung der Lichtundurchlässigkeitskenngrößen von innen und außen liegenden Abdunkelungs /Verdunkelungsanlagen nach den Festlegungen in EN 14501 fest.
Diese Europäische Norm gilt für das gesamte Sortiment von Abschlüssen, Markisen und Jalousien, die in EN 12216 definiert sind und in dieser Europäischen Norm als Sonnenschutzeinrichtungen beschrieben werden. Einige der Kenngrößen (z. B. gtot) sind nicht anwendbar, wenn die Produkte nicht parallel zur Verglasung angebracht sind (z. B. Gelenkarm Markisen).
ANMERKUNG   Der informative Anhang D stellt eine Herangehensweise für die Bestimmung der Kenngrößen im Falle ausstellbarer Produkte dar.
Produkte, die fluoreszierende oder retroreflektierende Materialien verwenden, sind nicht Gegenstand dieser Europäischen Norm.

Fermetures et stores - Confort thermique et lumineux - Méthodes d'essai et de calcul

Cette Norme européenne définit les méthodes d’essai et de calcul permettant la détermination des caractéristiques de réflexion et de transmission à utiliser pour déterminer les classes de performance de confort thermique et lumineux des stores extérieurs, des stores intérieurs et des fermetures pour baies équipées de fenêtres, telles que spécifiées dans l’EN 14501.
Cette Norme européenne spécifie également la méthode permettant de déterminer les performances d’opacité des stores extérieurs, des stores intérieurs et des fermetures pour baies équipées de fenêtres opaques/d’obscurcissement, telles que spécifiées dans l’EN 14501.
Cette Norme européenne s'applique à l'ensemble des fermetures, stores extérieurs et stores intérieurs définis dans l’EN 12216, décrits comme dispositifs de protection solaire dans le présent document. Certaines caractéristiques (par exemple gtot) ne sont pas applicables lorsque les produits ne sont pas parallèles au vitrage (par exemple, les stores bannes).
NOTE   L’Annexe D informative présente une approche pour la détermination des caractéristiques dans le cas de produits projetables.
Les produits qui utilisent des matériaux fluorescents ou rétroréfléchissants ne relèvent pas du domaine d'application de cette norme européenne.

Rolete in polokna - Toplotno in vizualno ugodje - Preskus in računske metode

General Information

• Status: Withdrawn
• Publication Date: 06-May-2008
• Withdrawal Date: 09-Mar-2021
• ICS: 91.060.50 - Doors and windows
• Technical Committee: CEN/TC 33 - Doors, windows, shutters and building hardware
• Drafting Committee: CEN/TC 33/WG 3 - Blinds and shutters
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 10-Mar-2021
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 14500:2008 - Blinds and shutters - Thermal and visual comfort - Test and calculation methods

Relations

• Replaced By: EN 14500:2021 - Blinds and shutters - Thermal and visual comfort - Test and calculation methods
• Effective Date: 17-Mar-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14500:2008
01-september-2008
5ROHWHLQSRORNQD7RSORWQRLQYL]XDOQRXJRGMH3UHVNXVLQUDþXQVNHPHWRGH
Blinds and shutters - Thermal and visual comfort - Test and calculation methods
Abschlüsse - Thermischer und visueller Komfort - Prüf- und Berechnungsverfahren
Fermetures et stores - Confort thermique et lumineux - Méthodes d'essai et de calcul
Ta slovenski standard je istoveten z: EN 14500:2008
ICS:
91.060.50 Vrata in okna Doors and windows
SIST EN 14500:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14500:2008

---------------------- Page: 2 ----------------------

SIST EN 14500:2008
EUROPEAN STANDARD
EN 14500
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2008
ICS 91.060.50

English Version
Blinds and shutters - Thermal and visual comfort - Test and
calculation methods
Fermetures et stores - Confort thermique et lumineux - Abschlüsse - Thermischer und visueller Komfort - Prüf- und
Méthodes d'essai et de calcul Berechnungsverfahren
This European Standard was approved by CEN on 11 April 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14500:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14500:2008
EN 14500:2008 (E)
Contents
Page
Foreword.4
Introduction .5
1 Scope .6
2 Normative references .6
3 Terms and definitions .6
4 Notations used.10
4.1 General .10
4.2 Visual or solar properties .10
4.3 Geometry of the radiation .10
4.4 Optical factors.11
5 Test and calculation methods to be used according to product - Guidelines .12
5.1 General .12
5.2 Venetian blinds .12
5.3 Roller blinds .13
5.4 Pleated blinds .13
5.5 Projecting awnings.
...

SLOVENSKI STANDARD
SIST EN 14500:2008
01-september-2008
Rolete in polokna - Toplotno in vizualno ugodje - Preskus in računske metode
Blinds and shutters - Thermal and visual comfort - Test and calculation methods
Abschlüsse - Thermischer und visueller Komfort - Prüf- und Berechnungsverfahren
Fermetures et stores - Confort thermique et lumineux - Méthodes d'essai et de calcul
Ta slovenski standard je istoveten z: EN 14500:2008
ICS:
91.060.50 Vrata in okna Doors and windows
SIST EN 14500:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 14500:2008

---------------------- Page: 2 ----------------------
SIST EN 14500:2008
EUROPEAN STANDARD
EN 14500
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2008
ICS 91.060.50

English Version
Blinds and shutters - Thermal and visual comfort - Test and
calculation methods
Fermetures et stores - Confort thermique et lumineux - Abschlüsse - Thermischer und visueller Komfort - Prüf- und
Méthodes d'essai et de calcul Berechnungsverfahren
This European Standard was approved by CEN on 11 April 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14500:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 14500:2008
EN 14500:2008 (E)
Contents
Page
Foreword.4
Introduction .5
1 Scope .6
2 Normative references .6
3 Terms and definitions .6
4 Notations used.10
4.1 General .10
4.2 Visual or solar properties .10
4.3 Geometry of the radiation .10
4.4 Optical factors.11
5 Test and calculation methods to be used according to product - Guidelines .12
5.1 General .12
5.2 Venetian blinds .12
5.3 Roller blinds .13
5.4 Pleated blinds .13
5.5 Projecting awnings.
...