EN ISO 9988-2:2015

Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006)

ISO 9988-2:2006 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polyoxymethylene moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given.
Procedures and conditions are described for the preparation of test specimens, and procedures are given for measuring properties of the materials from which these specimens are made. Properties and test methods which are suitable and necessary to characterize polyoxymethylene moulding and extrusion materials are listed.
The properties have been selected from the general test methods in ISO 10350-1:1998. Other test methods in wide use for, or of particular significance to, these moulding and extrusion materials are also included in ISO 9988-2:2006 as designatory properties specified in ISO 9988-1: melt flow rate and tensile modulus.

Kunststoffe - Polyoxymethylen-(POM-)Formmassen - Teil 2: Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 9988-2:2006)

Plastiques - Matériaux à base de polyoxyméthylène (POM) pour moulage et extrusion - Partie 2: Préparation des éprouvettes et détermination des propriétés (ISO 9988-2:2006)

Polimerni materiali - Materiali na osnovi polioksimetilena (PMMA) za oblikovanje in ekstrudiranje - 2. del: Priprava preskušancev in ugotavljanje lastnosti (ISO 9988-2:2006)

General Information

• Status: Withdrawn
• Publication Date: 10-Mar-2015
• Withdrawal Date: 05-Jun-2018
• ICS: 83.080.20 - Thermoplastic materials
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249 - Plastics
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 06-Jun-2018
• Ref Project: SIST EN ISO 9988-2:2015 - Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006)

Relations

• Replaced By: EN ISO 29988-2:2018 - Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 29988-2:2018)
• Effective Date: 02-Sep-2015

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9988-2:2015
01-junij-2015
Polimerni materiali - Materiali na osnovi polioksimetilena (PMMA) za oblikovanje in
ekstrudiranje - 2. del: Priprava preskušancev in ugotavljanje lastnosti (ISO 9988-
2:2006)
Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2:
Preparation of test specimens and determination of properties (ISO 9988-2:2006)
Kunststoffe - Polyoxymethylen-(POM-)Formmassen - Teil 2: Herstellung von
Probekörpern und Bestimmung von Eigenschaften (ISO 9988-2:2006)
Plastiques - Matériaux à base de polyoxyméthylène (POM) pour moulage et extrusion -
Partie 2: Préparation des éprouvettes et détermination des propriétés (ISO 9988-2:2006)
Ta slovenski standard je istoveten z: EN ISO 9988-2:2015
ICS:
83.080.20 Plastomeri Thermoplastic materials
SIST EN ISO 9988-2:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9988-2:2015

---------------------- Page: 2 ----------------------

SIST EN ISO 9988-2:2015

EUROPEAN STANDARD
EN ISO 9988-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2015
ICS 83.080.20
English Version
Plastics - Polyoxymethylene (POM) moulding and extrusion
materials - Part 2: Preparation of test specimens and
determination of properties (ISO 9988-2:2006)
Plastiques - Matériaux à base de polyoxyméthylène (POM) Kunststoffe - Polyoxymethylen-(POM-)Formmassen - Teil 2:
pour moulage et extrusion - Partie 2: Préparation des Herstellung von Probekörpern und Bestimmung von
éprouvettes et détermination des propriétés (ISO 9988- Eigenschaften (ISO 9988-2:2006)
2:2006)
This European Standard was approved by CEN on 1 March 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9988-2:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9988-2:2015
EN ISO 9988-2:2015 (E)
Contents
Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 9988-2:2015
EN ISO 9988-2:2015 (E)
Foreword
The text of ISO 9988-2:2006 has been prepared by Technical Committee ISO/TC 61 “Plastics” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 9988-2:2015 by
Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2015, and conflicting national standards shall be
withdrawn at the latest by September 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 9988-2:2006 has been approved by CEN as EN ISO 9988-2:2015 without any modificatio
...