EN 2798:2019

Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 80 IRHD

This European Standard specifies the properties of fluorocarbon rubber (FKM) ), low compression set, hardness 80 IRHD, for aerospace applications.

Luft- und Raumfahrt - Fluorcarbon-Elastomer (FKM) - Niedriger Druckverformungsrest - Härte 80 IRHD

Dieses Dokument legt die Eigenschaften von Fluorcarbon-Elastomer (FKM)1, niedriger Druckverformungsrest, Härte 80 IRHD, für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Élastomère fluoré (FKM) - Faible déformation rémanente après compression - Dureté 80 DIDC

Le présent document spécifie les propriétés de l’élastomère fluoré (FKM)1), à faible déformation rémanente après compression, de dureté 80 DIDC, pour applications aérospatiales.

Aeronavtika - Fluoroogljikove gume (FKM) - Nizka stopnja kompresije - Trdota 80 IRHD

Ta evropski standard določa lastnosti fluoroogljikove gume (FKM) ), nizke stopnje kompresije, trdote 80 IRHD, za uporabo v aeronavtiki.

General Information

• Status: Published
• Publication Date: 28-May-2019
• Withdrawal Date: 29-Nov-2019
• ICS: 49.025.40 - Rubber and plastics
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4/S 7 - Elastomers/Sealants
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 29-May-2019
• Completion Date: 29-May-2019
• Ref Project: SIST EN 2798:2019 - Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 80 IRHD

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2019
Aeronavtika - Fluoroogljikove gume (FKM) - Nizka stopnja kompresije - Trdota 80
IRHD
Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 80
IRHD
Luft- und Raumfahrt - Fluorocarbon-Elastomer (FKM) - Niedriger Druckverformungsrest -
Härte 80 IRDH
Série aérospatiale - Élastomère fluoré (FKM) - Faible déformation rémanente après
compression - Dureté 80 DIDC
Ta slovenski standard je istoveten z: EN 2798:2019
ICS:
49.025.40 Guma in polimerni materiali Rubber and plastics
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 2798
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2019
EUROPÄISCHE NORM
ICS 49.025.40
English Version
Aerospace series - Fluorocarbon rubber (FKM) - Low
compressions set - Hardness 80 IRHD
Série aérospatiale - Élastomère fluoré (FKM) - Faible Luft- und Raumfahrt - Fluorocarbon-Elastomer (FKM) -
déformation rémanente après compression - Dureté 80 Niedriger Druckverformungsrest - Härte 80 IRDH
DIDC
This European Standard was approved by CEN on 20 November 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2798:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Application of the material . 5
5 Properties . 5
6 Designation . 7
7 Technical specification . 7

European foreword
This document (EN 2798:2019) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identi
...