EN 1034-6:2005+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender

This European Standard applies to calenders intended for use in paper making and finishing and shall be used together with EN 1034-1:2000+A1:2009. It deals with all significant hazards listed in clause 4. Related safety requirements and/or measures are described in clause 5.
It does not cover hazards connected with lifting operations required for changing rolls, inserting reels into the unwinding unit, removal of reels from the winding unit and heating systems for heating calender rolls..
This European Standard is not applicable to calenders that have been manufactured before the date of publication of this standard.

Sicherheit von Maschinen - Sicherheitstechnische Anforderungen für Konstruktion und Bau von Maschinen der Papierherstellung und Ausrüstung - Teil 6: Kalander

Diese Europäische Norm gilt für Kalander der Papierherstellung und -ausrüstung und ist gemeinsam mit
!EN 1034-1:2000+A1:2010" anzuwenden. Sie behandelt alle in Abschnitt 4 aufgeführten signifikanten
Gefährdungen. Zugehörige Sicherheitsanforderungen und/oder -maßnahmen werden in Abschnitt 5 beschrieben.
Nicht behandelt werden die Gefährdungen der Hebeeinrichtungen, die zum Wechseln der Walzen, Einlegen
der Rollen in die Abrollung und Entnehmen der Rollen aus der Aufrollung bestimmt sind, sowie Heizsysteme
zum Erwärmen von Kalanderwalzen.
Diese Europäische Norm gilt nicht für Kalander, die hergestellt wurden, bevor CEN die Norm veröffentlichte.

Sécurité des machines - Prescriptions de sécurité pour la conception et la construction de machines de fabrication et de finition du papier - Partie 6: Calandres

La présente Norme européenne s’applique aux calandres destinées à la fabrication et à la finition du papier et doit être appliqué conjointement avec l'!EN 1034-1:2000+A1:2010".
Elle traite de tous les phénomènes dangereux significatifs, les situations dangereuses et les évènements dangereux qui s'appliquent aux défibreurs lorsqu'ils sont utilisés dans des conditions normales et conformément aux conditions prévisibles du fabricant (voir Article 4).
Les phénomènes dangereux liés aux dispositifs de levage, qui sont destinés au remplacement des cylindres, à la mise en place des bobines dans l’unité de déroulage et à la préhension des bobines de l'unité d’enroulage, ainsi qu’aux systèmes de chauffage destinés au réchauffement des cylindres de calandre ne sont pas traités dans la présente norme.
La présente Norme européenne ne s’applique pas aux calandres qui ont été fabriquées avant sa publication par le CEN.

Varnost strojev - Varnostne zahteve za načrtovanje in konstrukcijo strojev in opreme za izdelavo papirja - 6. del: Kalander

Ta evropski standard velja za kalandre, namenjene uporabi pri izdelavi papirja, in se uporablja skupaj z EN 1034-1:2000+A1:2010. Obravnava vse velike nevarnosti, navedene v Klavzuli 4. Povezane varnostne zahteve in/ali ukrepi so opisani v Klavzuli 5.

General Information

• Status: Published
• Publication Date: 01-Dec-2009
• Withdrawal Date: 29-Jun-2010
• ICS: 85.100 - Equipment for the paper industry
• Technical Committee: CEN/TC 198 - Printing and paper machinery - Safety
• Drafting Committee: CEN/TC 198/WG 2 - Paper Machinery
• Current Stage: 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
• Completion Date: 09-May-2018
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 1034-6:2006+A1:2010 - Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender

Relations

• Merged From: EN 1034-6:2005 - Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Maschinen - Sicherheitstechnische Anforderungen für Konstruktion und Bau von Maschinen der Papierherstellung und Ausrüstung - Teil 6: KalanderSécurité des machines - Prescriptions de sécurité pour la conception et la construction de machines de fabrication et de finition du papier - Partie 6: CalandresSafety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender85.100Oprema za papirno industrijoEquipment for the paper industry21.020Characteristics and design of machines, apparatus, equipment13.110Varnost strojevSafety of machineryICS:Ta slovenski standard je istoveten z:EN 1034-6:2005+A1:2009SIST EN 1034-6:2006+A1:2010en,fr01-februar-2010SIST EN 1034-6:2006+A1:2010SLOVENSKI
STANDARD



SIST EN 1034-6:2006+A1:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1034-6:2005+A1
December 2009 ICS 85.100 Supersedes EN 1034-6:2005English Version
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender
Sécurité des machines - Prescriptions de sécurité pour la conception et la construction de machines de fabrication et de finition du papier - Partie 6: Calandres
Sicherheit von Maschinen - Sicherheitstechnische Anforderungen für Konstruktion und Bau von Maschinen der Papierherstellung und Ausrüstung - Teil 6: Kalander This European Standard was approved by CEN on 4 November 2005 and includes Amendment 1 approved by CEN on 17 November 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1034-6:2005+A1:2009: ESIST EN 1034-6:2006+A1:2010



EN 1034-6:2005+A1:2009 (E) 2 Contents Page Foreword .4Introduction .51Scope .52Normative references .53Terms and definitions .74List of hazards .95Safety requirements and/or measures . 125.1General . 125.2Start-up warning devices . 125.3Emergency stop devices and braking systems . 125.4Web threading and sheet feeding . 135.5Workplaces, access stairs, catwalks, passageways . 135.6Isolation and energy dissipation, prevention of unexpected start-up . 135.7Facilities and measures for make-ready and repair .
...