EN ISO 15877-5:2009

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system (ISO 15877-5:2009)

ISO 15877-5:2009 specifies the characteristics of the fitness for purpose of chlorinated poly(vinyl chloride) (PVC-C) piping systems, intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption, (domestic systems) and for heating systems, under design pressures and temperatures according to the class of application.
ISO 15877-5:2009 covers a range of service conditions (application classes) and design pressure classes. It does not apply if the values of the design temperature, maximum design temperature and malfunction temperature are in excess of those given in ISO 15877-1:2009. ISO 15877-5:2009 specifies the test parameters for the test methods to which it refers.
In conjunction with the other parts of ISO 15877, it is applicable to PVC-C pipes and fittings, their joints and joints with components of other plastics and non-plastics materials intended to be used for hot and cold water installations.

Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Chloriertes Polyvinylchlorid (PVC-C) - Teil: 5 Gebrauchstauglichkeit des Systems (ISO 15877-5:2009)

Dieser Teil von ISO 15877 legt Anforderungen an die Gebrauchstauglichkeit von Rohrleitungssystemen aus
chloriertem Polyvinylchlorid (PVC-C) fest, die in der Warm- und Kaltwasserinstallation innerhalb von
Gebäuden für den Transport von Trink- oder Brauchwasser (Hausinstallation) und in Heizungsanlagen unter
Berücksichtigung des betreffenden zulässigen Betriebsdruckes und der für die jeweilige Anwendungsklasse
geltenden Temperaturen (siehe Tabelle 1 von ISO 15877-1:2008) eingesetzt werden.
Dieser Teil von ISO 15877 enthält Festlegungen zu Anwendungsklassen, die sich auf Betriebsbedingungen
beziehen, sowie Festlegungen über zulässige Betriebsdrücke. Dieser Teil von ISO 15877 gilt nicht, wenn für
TD, Tmax und Tmal höhere als die in Tabelle 1 von ISO 15877-1:2008 aufgeführten Werte zu Grunde gelegt
werden.
ANMERKUNG Der Anwender bzw. Auftraggeber ist unter Berücksichtigung der eigenen Anforderungen sowie der
geltenden nationalen Festlegungen und Verlegepraktiken für die entsprechende Auswahl dieser Kriterien verantwortlich.
Sie legt auch die Prüfparameter für die Prüfverfahren fest, auf die in diesem Teil von ISO 15877 verwiesen
wird.
Zusammen mit den übrigen Teilen von ISO 15877 gilt dieser Teil für Rohre und Formstücke aus PVC-C,
deren Verbindungen untereinander sowie mit Rohrleitungsteilen aus anderen Kunststoffen oder metallenen
Werkstoffen, die für die Warm- und Kaltwasserinstallation vorgesehen sind.

Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Poly(chlorure de vinyle) chloré (PVC-C) - Partie 5: Aptitude à l'emploi du système (ISO 15877-5:2009)

L'ISO 15877-5:2009 spécifie les caractéristiques d'aptitude à l'emploi des systèmes de canalisations en poly(chlorure de vinyle) (PVC-C) destinés à des installations d'eau chaude et froide à l'intérieur des bâtiments pour le transport de l'eau, destinée ou non à la consommation humaine (systèmes domestiques) et aux systèmes de chauffage, à des pressions et des températures de service correspondant à la classe d'application.
Elle couvre une gamme de conditions de service (classes d'application) et de classes de pression de service. Elle ne s'applique pas si les valeurs de la température de service, de la température maximale de service et de la température de dysfonctionnement sont supérieures à celles qui sont données. L'ISO 15877‑1:2009 spécifie également les paramètres d'essai pour les méthodes d'essai auxquelles elle fait référence.
Conjointement avec les autres parties de l'ISO 15877, elle s'applique aux tubes en PVC-C, aux raccords, à leurs assemblages et aux assemblages avec des composants faits en d'autres matériaux, plastiques ou non plastiques, pouvant être utilisés avec des installations d'eau chaude et froide.

Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo - Klorirani polivinilklorid (PVC-C) - 5. del: Ustrezanje zahtevam za uporabnost sistema (ISO 15877-5:2009)

General Information

• Status: Published
• Publication Date: 14-Mar-2009
• Withdrawal Date: 29-Sep-2009
• ICS: 23.040.20 - Plastics pipes
• ICS: 91.140.60 - Water supply systems
• Technical Committee: CEN/TC 155 - Plastics piping systems and ducting systems
• Drafting Committee: CEN/TC 155/WG 16 - Systems for hot and cold water applications
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Mar-2009
• Due Date: 02-Mar-2008
• Completion Date: 15-Mar-2009
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN ISO 15877-5:2009 - Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system (ISO 15877-5:2009)

Relations

• Replaces: EN ISO 15877-5:2003 - Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system (ISO 15877-5:2003)
• Effective Date: 23-Mar-2009
• Amended By: EN ISO 15877-5:2009/A2:2020 - Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 2 (ISO 15877-5:2009/Amd 2:2020)
• Effective Date: 27-Nov-2019
• Amended By: EN ISO 15877-5:2009/A1:2010 - Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15877-5:2009/AMD 1:2010)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15877-5:2009
01-junij-2009
1DGRPHãþD
SIST EN ISO 15877-5:2004
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY]DQDSHOMDYH]YURþRLQKODGQRYRGR
.ORULUDQLSROLYLQLONORULG39&&GHO8VWUH]DQMH]DKWHYDP]DXSRUDEQRVW
VLVWHPD,62
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl
chloride) (PVC-C) - Part 5: Fitness for purpose of the system (ISO 15877-5:2009)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Chloriertes
Polyvinylchlorid (PVC-C) - Teil: 5 Gebrauchstauglichkeit des Systems (ISO 15877-
5:2009)
Systemes de canalisations en plastique pour les installations d'eau chaude et froide -
Poly(chlorure de vinyle) chloré (PVC-C) - Partie 5: Aptitude a l'emploi du systeme (ISO
15877-5:2009)
Ta slovenski standard je istoveten z: EN ISO 15877-5:2009
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
91.140.60 Sistemi za oskrbo z vodo Water supply systems
SIST EN ISO 15877-5:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15877-5:2009

---------------------- Page: 2 ----------------------

SIST EN ISO 15877-5:2009
EUROPEAN STANDARD
EN ISO 15877-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2009
ICS 23.040.20; 91.140.60 Supersedes EN ISO 15877-5:2003
English Version
Plastics piping systems for hot and cold water installations -
Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for
purpose of the system (ISO 15877-5:2009)
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für die Warm- und
installations d'eau chaude et froide - Poly(chlorure de Kaltwasserinstallation - Chloriertes Polyvinylchlorid (PVC-
vinyle) chloré (PVC-C) - Partie 5: Aptitude à l'emploi du C) - Teil: 5 Gebrauchstauglichkeit des Systems (ISO
système (ISO 15877-5:2009) 15877-5:2009)
This European Standard was approved by CEN on 28 February 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15877-5:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 15877-5:2009
EN ISO 15877-5:2009 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 15877-5:2009
EN ISO 15877-5:2009 (E)
Foreword
This document (EN ISO 15877-5:2009) has been prepared by Technical Committee CEN/TC 155 "Plastics
piping systems and ducting systems", the secretariat of which is held by NEN, in collaboration with Technical
Committee ISO/TC 138 "Plastics pipes, fittings and valves for the transport of fluids".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2009, and conflicting national standards shall be
withdrawn at the latest by September 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15877-5:2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Swed
...