EN ISO 10427-1:2024
(Main)Oil and gas industries including lower carbon energy - Equipment for well cementing - Part 1: Casing bow-spring centralizers (ISO 10427-1:2024)
Oil and gas industries including lower carbon energy - Equipment for well cementing - Part 1: Casing bow-spring centralizers (ISO 10427-1:2024)
This document specifies testing, performance, and marking requirements for casing bow-spring centralizers to be used in oil and natural gas well construction. The procedures give guidance on verification testing for the manufacturer’s design, materials, and process specifications, and periodic testing to confirm the consistency of product performance. This specification is not applicable to other devices, such as rigid centralizers and cement baskets, or bow-spring centralizers used for other purposes (e.g., wireline tools, gravel pack, inner string).
This document is a supplement to API Spec 10D 7th edition (2021), the requirements of which are applicable with the exceptions specified in this document.
Öl- und Gasindustrie einschließlich kohlenstoffarmer Energieträger - Ausrüstung für die Zementation von Tiefbohrungen - Teil 1: Federkorb-Zentrierer für Futterrohre (ISO 10427-1:2024)
Industries du pétrole et du gaz, y compris les énergies à faible teneur en carbone - Équipement de cimentation de puits - Partie 1: Centreurs de tubes de cuvelage (ISO 10427-1:2024)
Le présent document spécifie les exigences relatives aux essais, aux performances et au marquage des centreurs de tubes de cuvelage utilisés pour la construction des puits de pétrole et de gaz naturel. Les modes opératoires établissent des essais de vérification des spécifications des fabricants en ce qui concerne la conception, les matériaux et les procédés, et des essais périodiques de confirmation de régularité des performances du produit. Cette spécification ne s'applique pas aux autres dispositifs, comme les centreurs rigides et les ombrelles de cimentation, ni aux centreurs à lames arquées flexibles utilisés à d'autres fins (par exemple: outils pour les câbles, gravillonnage, colonnes internes).
Le présent document complète la Spécification API 10D 7e édition (2021), dont les exigences sont applicables avec les exceptions spécifiées dans le présent document.
Naftna in plinska industrija, vključno z nizkoogljično energijo - Oprema za cementiranje vrtin - 1. del: Centralizatorji z lokom in vzmetjo v ohišju (ISO 10427-1:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2024
Naftna in plinska industrija, vključno z nizkoogljično energijo - Oprema za
cementiranje vrtin - 1. del: Centralizatorji z lokom in vzmetjo v ohišju (ISO 10427-
1:2024)
Oil and gas industries including lower carbon energy - Equipment for well cementing -
Part 1: Casing bow-spring centralizers (ISO 10427-1:2024)
Öl- und Gasindustrie einschließlich kohlenstoffarmer Energieträger - Ausrüstung für die
Zementation von Tiefbohrungen - Teil 1: Federkorb-Zentrierer für Futterrohre (ISO
10427-1:2024)
Industries du pétrole et du gaz, y compris les énergies à faible teneur en carbone -
Équipement de cimentation de puits - Partie 1: Centreurs de tubes de cuvelag (ISO
10427-1:2024)
Ta slovenski standard je istoveten z: EN ISO 10427-1:2024
ICS:
75.180.10 Oprema za raziskovanje, Exploratory, drilling and
vrtanje in odkopavanje extraction equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 10427-1
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2024
EUROPÄISCHE NORM
ICS 75.180.10 Supersedes EN ISO 10427-1:2001
English Version
Oil and gas industries including lower carbon energy -
Equipment for well cementing - Part 1: Casing bow-spring
centralizers (ISO 10427-1:2024)
Industries du pétrole et du gaz, y compris les énergies Öl- und Gasindustrie einschließlich kohlenstoffarmer
à faible teneur en carbone - Équipement de Energieträger - Ausrüstung für die Zementation von
cimentation de puits - Partie 1: Centreurs de tubes de Tiefbohrungen - Teil 1: Federkorb-Zentrierer für
cuvelage (ISO 10427-1:2024) Futterrohre (ISO 10427-1:2024)
This European Standard was approved by CEN on 27 August 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10427-1:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 10427-1:2024) has been prepared by Technical Committee ISO/TC 67 "Oil and
gas industries including lower carbon energy" in collaboration with Technical Committee CEN/TC 12
“Oil and gas industries including lower carbon energy” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2025, and conflicting national standards shall
be withdrawn at the latest by March 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10427-1:2001.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 10427-1:2024 has been approved by CEN as EN ISO 10427-1:2024 without any
modification.
International
Standard
ISO 10427-1
Second edition
Oil and gas industries including
2024-08
lower carbon energy — Equipment
for well cementing —
Part 1:
Casing bow-spring centralizers
Industries du pétrole et du gaz, y compris les énergies à faible
teneur en carbone — Équipement de cimentation de puits —
Partie 1: Centreurs de tubes de cuvelage
Reference number
ISO 10427-1:2024(en) © ISO 2024
ISO 10427-1:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 10427-1:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbrevaited terms . 1
3.1 Terms and definitions .1
3.2 Abbreviated terms .2
4 Supplements to API Spec 10D, 7th edition (2021) . 2
4.1 General requirements .2
4.2 Compensating for the mass of the traveling pipe and attachments .2
4.3 Coated centralizer .2
4.4 Centralizer maximum diameter reported after open hole test .2
4.5 Centralizer Rigid OD .5
5 Order of testing of running forces and restoring forces in conventional and under-
reamed well configurations . 5
iii
ISO 10427-1:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approva
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.