EN 4057-304:2006

Aerospace series - Cable ties for harnesses - Test methods - Part 304: Loop tensile strength at maximum working temperature

This standard specifies the procedure to determine the force required to open cable ties for aerospace appli-cations under the maximum working temperature.
It shall be used together with EN 4057 100.

Luft- und Raumfahrt - Befestigungsbänder für Leitungsbündel - Prüfverfahren - Teil 304: Abbindefestigkeit bei maximaler Einsatztemperatur

Diese Norm legt das Verfahren zur Ermittlung der Kraft fest, die bei maximaler Einsatztemperatur zum Lösen von Befestigungsbändern für Anwendungen in der Luft  und Raumfahrt erforderlich ist.
Sie ist in Verbindung mit EN 4057 100 anzuwenden.

Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 304 : Résistance à la rupture de la boucle à la température maximale d'utilisation

Aeronavtika - Kabelske spojke za vezalno pasovje - Preskusne metode - 304. del: Natezna trdnost zanke pri najvišji delovni temperaturi

General Information

• Status: Published
• Publication Date: 12-Dec-2006
• Withdrawal Date: 29-Jun-2007
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 01-Jun-2017
• Ref Project: SIST EN 4057-304:2009 - Aerospace series - Cable ties for harnesses - Test methods - Part 304: Loop tensile strength at maximum working temperature

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Kabelske spojke za vezalno pasovje - Preskusne metode - 304. del: Natezna trdnost zanke pri najvišji delovni temperaturiLuft- und Raumfahrt - Befestigungsbänder für Leitungsbündel - Prüfverfahren - Teil 304: Abbindefestigkeit bei maximaler EinsatztemperaturSérie aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 304 : Résistance à la rupture de la boucle à la température maximale d'utilisationAerospace series - Cable ties for harnesses - Test methods - Part 304: Loop tensile strength at maximum working temperature49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 4057-304:2006SIST EN 4057-304:2009en,de01-junij-2009SIST EN 4057-304:2009SLOVENSKI
STANDARD



SIST EN 4057-304:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4057-304December 2006ICS 49.060 English VersionAerospace series - Cable ties for harnesses - Test methods -Part 304: Loop tensile strength at maximum workingtemperatureSérie aérospatiale - Frettes de câblage pour harnais -Méthodes d'essais - Partie 304 : Résistance à la rupture dela boucle à la température maximale d'utilisationLuft- und Raumfahrt - Befestigungsbänder fürLeitungsbündel - Prüfverfahren - Teil 304: Abbindefestigkeitbei maximaler EinsatztemperaturThis European Standard was approved by CEN on 28 October 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4057-304:2006: ESIST EN 4057-304:2009



EN 4057-304:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Apparatus.
...