EN 4056-003:2016

Aerospace series - Cable ties for harnesses - Part 003: Plastic cable ties - Operating temperatures -65 °C to 105 °C and -65 °C to 150 °C - Product standard

This standard defines the required characteristics of cable ties with either internal or external serrations manufactured entirely from plastics material, for installation under controlled tension on aircraft cable harnesses.
It shall be used together with EN 4056-001.

Luft- und Raumfahrt - Befestigungsbänder für Leitungsbündel - Teil 003: Kabelbinder aus Kunststoff - Betriebstemperatur -65 °C bis 105 °C und -65 °C bis 150 °C - Produktnorm

Série aérospatiale - Frettes de câblage pour harnais - Partie 003: Frettes en plastique - Températures d’utilisation -65 °C à 105 °C et -65 °C à 150 °C - Norme de produit

Aeronavtika - Kabelske spojke za vezalno pasovje - 003. del: Plastične vezice - Delovne temperature med –65 °C do 105 °C in –65 °C do 150 °C - Standard za proizvod

Ta standard določa zahtevane lastnosti kabelskih spojk z notranjo ali zunanjo nazobčanostjo, v celoti proizvedenih iz plastike, za vgradnjo med nadzorovano napetostjo v letalsko vezalno pasovje.
Uporabljati ga je treba s standardom EN 4056-001.

General Information

• Status: Withdrawn
• Publication Date: 06-Sep-2016
• Withdrawal Date: 03-Sep-2019
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 04-Sep-2019
• Ref Project: SIST EN 4056-003:2016 - Aerospace series - Cable ties for harnesses - Part 003: Plastic cable ties - Operating temperatures -65 °C to 105 °C and -65 °C to 150 °C - Product standard

Relations

• Replaced By: EN 4056-003:2019 - Aerospace series - Cable ties for harnesses - Part 003: Plastic cable ties - Operating temperatures - 65 °C to 105 °C and - 65 °C to 150 °C - Product standard
• Effective Date: 11-Sep-2019

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2016
$HURQDYWLND.DEHOVNHVSRMNH]DYH]DOQRSDVRYMHGHO3ODVWLþQHYH]LFH
'HORYQHWHPSHUDWXUHPHG±ƒ&GRƒ&LQ±ƒ&GRƒ&6WDQGDUG]D
SURL]YRG
Aerospace series - Cable ties for harnesses - Part 003: Plastic cable ties - Operating
temperatures -65 °C to 105 °C and -65 °C to 150 °C - Product standard
Luft- und Raumfahrt - Befestigungsbänder für Leitungsbündel - Teil 003:
Befestigungsbänder aus Kunststoff - Betriebstemperatur -65 °C bis 105 °C und -65 °C
bis 150 °C - Produktnorm
Série aérospatiale - Frettes de câblage pour harnais - Partie 003: Frettes en plastique -
Températures d’utilisation -65 °C à 105 °C et -65 °C à 150 °C - Norme de produit
Ta slovenski standard je istoveten z: EN 4056-003:2016
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 4056-003
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2016
EUROPÄISCHE NORM
ICS 49.060
English Version
Aerospace series - Cable ties for harnesses - Part 003:
Plastic cable ties - Operating temperatures -65 °C to 105 °C
and -65 °C to 150 °C - Product standard
Série aérospatiale - Frettes de câblage pour harnais - Luft- und Raumfahrt - Befestigungsbänder für
Partie 003: Frettes en plastique - Températures Leitungsbündel - Teil 003: Kabelbinder aus Kunststoff -
d'utilisation -65 °C à 105 °C et -65 °C à 150 °C - Norme Betriebstemperatur -65 °C bis 105 °C und -65 °C bis
de produit 150 °C - Produktnorm
This European Standard was approved by CEN on 2 January 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4056-003:2016 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
5 Tests and requirements . 7
6 Quality assurance . 8
7 Designation. 8
8 Marking . 8
9 Packaging and storage . 8

European foreword
This document (EN 4056-003:2016) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2017, and conflicting national standards shall
be withdrawn at the latest by March 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
1 Scope
This European Standard defines the required characteristics of cable ties with either internal or
external serrations manufactured entirely from plastics material, for installation under controlled
tension on aircraft cable harnesses.
It shall be used together with EN 4056-001.
2 Normative references
The following documents, in whole or in par
...