EN 4057-100:2006

Aerospace series - Cable ties for harnesses - Test methods - Part 100: General

This standard specifies the general requirements and test procedures for cable ties for harnesses for aircraft use. This standard does not include accessories such as mounting brackets, identification lags or reusable cable ties.

Luft- und Raumfahrt - Befestigungsbänder für Leitungsbündel - Prüfverfahren - Teil 100: Allgemeines

Diese Norm legt die allgemeinen Anforderungen an und Prüfverfahren für Befestigungsbänder für Leitungs¬bündel zur Verwendung in Luftfahrzeugen fest. Diese Norm bezieht sich nicht auf Zubehörteile, wie z. B. Montagehalterungen, Kennzeichnungsetiketten, oder wiederverwendbare Befestigungsbänder.

Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 100 : Généralités

Aeronavtika - Kabelske spojke za vezalno pasovje - Preskusne metode - 100. del: Splošno

General Information

• Status: Published
• Publication Date: 12-Dec-2006
• Withdrawal Date: 29-Jun-2007
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 01-Jun-2017
• Ref Project: SIST EN 4057-100:2009 - Aerospace series - Cable ties for harnesses - Test methods - Part 100: General

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Kabelske spojke za vezalno pasovje - Preskusne metode - 100. del: SplošnoLuft- und Raumfahrt - Befestigungsbänder für Leitungsbündel - Prüfverfahren - Teil 100: AllgemeinesSérie aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 100 : GénéralitésAerospace series - Cable ties for harnesses - Test methods - Part 100: General49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 4057-100:2006SIST EN 4057-100:2009en,de01-maj-2009SIST EN 4057-100:2009SLOVENSKI
STANDARD



SIST EN 4057-100:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4057-100December 2006ICS 49.060 English VersionAerospace series - Cable ties for harnesses - Test methods -Part 100: GeneralSérie aérospatiale - Frettes de câblage pour harnais -Méthodes d'essais - Partie 100 : GénéralitésLuft- und Raumfahrt - Befestigungsbänder fürLeitungsbündel - Prüfverfahren - Teil 100: AllgemeinThis European Standard was approved by CEN on 28 October 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4057-100:2006: ESIST EN 4057-100:2009



EN 4057-100:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Definitions.4 4 General test conditions.4 5 Reporting results.5 6 Test methods.5
SIST EN 4057-100:2009



EN 4057-100:2006 (E) 3 Foreword This document (EN 4057-100:2006) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has re-ceived the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2007, and conflicting national standards shall be withdrawn at the latest by June 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den-mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-bourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer-land and the United Kingdom. SIST EN 4057-100:2009



EN 4057-100:2006 (E) 4 1 Scope This standard specifies the general requirements and test procedur
...