EN 459-3:2001
(Main)Building lime - Part 3: Conformity evaluation
Building lime - Part 3: Conformity evaluation
This European Standard specifies the scheme for the evaluation of conformity of building lime to their corresponding
product standard EN 459-1:2001 including declaration of conformity by the manufacturer.
The European Standard provides technical rules for factory production control by the manufacturer, including
autocontrol testing of samples. It also provides rules for actions to be followed in the event of non-conformity, the
procedure for the declaration and requirements for dispatching centres.
Baukalk - Teil 3: Konformitätsbewertung
Diese Europäische Norm legt das Verfahren für die Bewertung der Konformität von Baukalk mit der entsprechen-
den Produktnorm EN 459-1:2001 einschließlich der Konformitätserklärung durch den Hersteller fest.
Diese Europäische Norm enthält technische Regeln für die werkseigene Produktionskontrollle durch den Hersteller
einschließlich der internen Überwachungsprüfung von Proben. Sie enthält darüber hinaus Regeln für Maßnahmen,
die bei Nichtkonformität zu ergreifen sind, sowie das Verfahren für die Konformitätserklärung und Anforderungen
an Auslieferungsstellen.
Chaux de construction - Partie 3: Evaluation de la conformité
La présente Norme européenne spécifie le système d'évaluation de la conformité de la chaux de construction à la norme produit lui correspondant, l'EN 459-1:2001, ainsi que la déclaration de conformité par le fabricant.
La présente norme européenne fournit les règles techniques régissant le contrôle de production en usine effectué par le fabricant, ainsi que les essais d'auto-contrôle sur échantillons. Elle fournit également les règles pour les actions à entreprendre en cas de non conformité, la procédure de déclaration et les exigences applicables aux centres de distribution.
Gradbeno apno – 3. del: Ovrednotenje skladnosti
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gradbeno apno – 3. del: Ovrednotenje skladnostiBaukalk - Teil 3: KonformitätsbewertungChaux de construction - Partie 3: Evaluation de la conformitéBuilding lime - Part 3: Conformity evaluation91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. MortarICS:Ta slovenski standard je istoveten z:EN 459-3:2001SIST EN 459-3:2002en01-april-2002SIST EN 459-3:2002SLOVENSKI
STANDARD
SIST EN 459-3:2002
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 459-3October 2001ICS 91.100.10English versionBuilding lime - Part 3: Conformity evaluationChaux de construction - Partie 3: Evaluation de laconformitéBaukalk - Teil 3: KonformitätsbewertungThis European Standard was approved by CEN on 16 February 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 459-3:2001 ESIST EN 459-3:2002
EN 459-3:2001 (E)ContentsPageForeword.31Scope.32Normative references.33Terms and definitions.44Factory production control by the manufacturer.54.1General requirements.54.2Internal quality control.64.3Autocontrol testing of samples.64.4Initial type testing of the building lime.75Initial inspection of the factory and the factory production control.85.1Inspection.85.2Assessment of the production equipment.85.3Assessment of laboratories.85.4Reports.86Declaration of conformity.87Conformity mark.98Action to be taken by the manufacturer in the event of non-conformity.99Requirements for dispatching centres.99.1General.99.2Tasks for the intermediary.9Bibliography.112SIST EN 459-3:2002
EN 459-3:2001 (E)ForewordThis European Standard has been prepared by Technical Committee CEN/TC 51 "Cement and building of limes",the secretariat which is held by IBN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by April 2002, and conflicting national standards shall be withdrawn at the latest byApril 2002The European Standard EN 459 for building lime consists of the following parts:Part 1: Definitions, specifications and conformity criteria;Part 2: Test methods;Part 3: Conformity evaluation.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,Switzerland and the United Kingdom.1
ScopeThis European Standard specifies the scheme for the evaluation of conformity of building lime to their correspondingproduct standard EN 459-1:2001 including declaration of conformity by the manufacturer.The European Standard provides technical rules for factory production control by the manufacturer, includingautocontrol testing o
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.