EN 459-3:2011
(Main)Building lime - Part 3: Conformity evaluation
Building lime - Part 3: Conformity evaluation
This European Standard specifies the scheme for the evaluation of conformity of building lime to their corresponding product standard EN 459-1. It provides rules for surveillance, assessment and acceptance of the factory production control and rules for the frequency of inspections.
The European Standard specifies technical rules for factory production control by the manufacturer, including autocontrol testing of samples. It also provides rules for actions to be followed in the event of non-conformity and requirements for dispatching centres.
Baukalk - Teil 3: Konformitätsbewertung
Diese Europäische Norm legt das Verfahren für die Bewertung der Übereinstimmung von Baukalk mit der ent-sprechen¬den Produktnorm EN 459-1 fest. Sie enthält Regeln zur Überwachung, Beur¬teilung und Anerken¬nung der werkseigenen Produktionskontrolle sowie Regeln zur Häufigkeit der Über¬wachung.
Diese Europäische Norm legt technische Regeln für die werkseigene Produktionskontrolle durch den Hersteller ein¬schließlich der internen Überwachungsprüfung von Proben fest. Sie enthält darüber hinaus Regeln für Maßnahmen, die bei Nichtkon¬formität zu ergreifen sind, sowie Anforderungen an Auslieferungsstellen.
Chaux de construction - Partie 3: Evaluation de la conformité
La présente Norme européenne spécifie le système d’évaluation de la conformité, de la chaux de construction
à la norme produit lui correspondant, l’EN 459-1. Elle fournit les règles pour la surveillance, l’évaluation et
l’acceptation du contrôle de la production en usine ainsi que les règles pour la fréquence des inspections.
La présente norme européenne fournit les règles techniques régissant le contrôle de production en usine
effectué par le fabricant, incluant les essais d’auto-contrôle sur échantillons. Elle fournit également les règles
pour les actions à entreprendre en cas de non conformité, et les exigences applicables aux centres de
distribution.
Gradbeno apno - 3. del: Ovrednotenje skladnosti
Ta evropski standard določa shemo za ovrednotenje skladnosti gradbenega apna z ustreznim standardom za proizvod EN 459-1. Podaja pravila za spremljanje, oceno in sprejemljivost nadzora tovarniške proizvodnje in pravila za pogostost inšpekcijskih pregledov.
Ta evropski standard določa tehnična pravila za nadzor tovarniške proizvodnje, ki ga izvaja proizvajalec, vključno s preskušanjem vzorcev za lastni nadzor. Podaja tudi pravila za ukrepe pri neskladnosti in zahteve za distribucijske centre.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gradbeno apno - 3. del: Ovrednotenje skladnostiBaukalk - Teil 3: KonformitätsbewertungChaux de construction - Partie 3: Evaluation de la conformitéBuilding lime - Part 3: Conformity evaluation91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. MortarICS:Ta slovenski standard je istoveten z:EN 459-3:2011SIST EN 459-3:2011en,fr,de01-julij-2011SIST EN 459-3:2011SLOVENSKI
STANDARDSIST EN 459-3:2002/AC:2004SIST EN 459-3:20021DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 459-3
June 2011 ICS 91.100.10 Supersedes EN 459-3:2001English Version
Building lime - Part 3: Conformity evaluation
Chaux de construction - Partie 3: Evaluation de la conformité
Baukalk - Teil 3: Konformitätsbewertung This European Standard was approved by CEN on 28 April 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 459-3:2011: ESIST EN 459-3:2011
1)
This testing corresponds also to the “further testing of samples” mentioned in Annex III Section 2 point (i) of the Construction Products Directive 89/106/EEC. SIST EN 459-3:2011
EN 459-
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.