iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 14089:2002

(Main)

Space product assurance - The control of limited shelf-life materials

Space product assurance - The control of limited shelf-life materials

Several classes of material depend on a chemical reaction for their application and their final properties are sensitive to the exact composition of the reactants. The final properties vary with the reactants’ age and storage condition.
This European Standard specifies the procedure to be used for the control of limited shelf­life materials employed in the fabrication of spacecraft and associated equipment.

Raumfahrtproduktsicherung - Kontrolle von Materialien mit begrenzter Lagerfähigkeit

Bestimmte Werkstoffklassen erfordern eine chemische Reaktion bei ihrer Anwendung, und ihre endgültigen Eigenschaften reagieren empfindlich auf die exakte Zusammensetzung der Reaktionsteilnehmer.
Diese Europäische Norm legt das Verfahren fest, das für die Kontrolle der begrenzten Lagerbeständigkeit von Werkstoffen verwendet wird, die bei der Herstellung von Raumfahrzeugen und zugehörigen Einrichtungen eingesetzt werden.

Assurance produit des projets spatiaux - Contrôle des équipements à durée de vie limitée sur étagère

L'application de plusieurs classes de matériaux dépend de leur réaction chimique. Leurs propriétés finales sont sensibles à la composition exacte des réactifs. Ces propriétés sont fonctions de l'âge et des conditions de stockage des réactifs
La présente Norme européenne spécifie la procédure à suivre pour contrôler les matériaux utilisés dans la fabrication des satellites et des équipements associés et dont la durée de vie sur étagère est limitée.

Space product assurance - The control of limited shelf-life materials

General Information

Status
Withdrawn
Publication Date
14-May-2002
Withdrawal Date
28-Oct-2014
ICS
49.025.01 - Materials for aerospace construction in general
49.140 - Space systems and operations
Technical Committee
CEN/SS T02 - Aerospace
Drafting Committee
CEN/SS T02 - Aerospace
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
29-Oct-2014
Mandate
M/237 - Mandate to CEN, CENELEC and ETSI for standardization in the field of equipment for the space industry
Ref Project
SIST EN 14089:2004 - Space product assurance - The control of limited shelf-life materials

Relations

Replaced By
EN 16602-70-22:2014 - Space product assurance - Control of limited shelf-life materials
Effective Date
05-Nov-2014

Buy Standard

EN 14089:2004EN 14089:2004
PreviousNext
Standard
EN 14089:2004
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Space product assurance - The control of limited shelf-life materialsRaumfahrtproduktsicherung - Kontrolle von Materialien mit begrenzter LagerfähigkeitAssurance produit des projets spatiaux - Contrôle des équipements a durée de vie limitée sur étagereSpace product assurance - The control of limited shelf-life materials49.140Vesoljski sistemi in operacijeSpace systems and operations49.025.01Materiali za letalsko in vesoljsko gradnjo na splošnoMaterials for aerospace construction in generalICS:Ta slovenski standard je istoveten z:EN 14089:2002SIST EN 14089:2004en01-maj-2004SIST EN 14089:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14089May 2002ICS 49.025.01; 49.140English versionSpace product assurance - The control of limited shelf-lifematerialsAssurance produit des projets spatiaux - Contrôle deséquipements à durée de vie limitée sur étagèreRaumfahrtproduktsicherung - Kontrolle von Materialien mitbegrenzter LagerfähigkeitThis European Standard was approved by CEN on 24 January 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14089:2002 ESIST EN 14089:2004

1) ECSS-Q-70-22ASIST EN 14089:2004
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 16602-70-22:2014(Main)
Space product assurance - Control of limited shelf-life materials
SIST EN 16602-70-22:2015

Several classes of materials depend on a chemical reaction for their application and their final properties are sensitive to the exact composition of the reactants. The final properties vary with the reactants’ age and storage condition.
This Standard defines the requirements for the identification, handling, storage and control of limited shelf­life materials employed in the fabrication of spacecraft and associated equipment.
This standard may be tailored for the specific characteristic and constrains of a space project in conformance with ECSS-S-ST-00.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16602-70-45:2014(Main)
Space product assurance - Mechanical testing of metallic materials
SIST EN 16602-70-45:2015

This Standard specifies requirements for mechanical testing of metallic materials to be used in the fabrication of spacecraft hardware.
This Standard establishes the requirements for most relevant test methods carried out to assess the tensile, fatigue and fracture
properties of metallic materials. It does not give a complete review of all the existing test methods for the evaluation of mechanical
properties of metallic materials.
Furthermore, this Standard specifies requirements for the evaluation, presentation and reporting of test results.
This standard may be tailored for the specific characteristic and constrains of a space project in conformance with ECSS-S-ST-00.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16602-70-36:2014(Main)
Space product assurance - Material selection for controlling stress-corrosion cracking
SIST EN 16602-70-36:2015

This Standard covers the following processes of the general materials, mechanicals parts and processes (MMPP) flow of ECSS-Q-ST-70:
•   The selection of metal alloys for which preference is given to approved data sources (Table 5 1 to Table 5 3)
•   The criticality analysis to determine if a stress corrosion cracking (SCC) evaluation is necessary
This Standard sets forth the criteria to be used in the selection of materials for spacecraft and associated equipment and facilities so that failure resulting from stress-corrosion is prevented.
It is intended to provide general criteria to be used in stress-corrosion cracking control, which begins during design thanks to a methodological material selection.
This document does not intend to include all factors and criteria necessary for the total control of stress­corrosion cracking in all alloys.
The criteria established in this Standard are only applicable to designs for service involving exposure conditions similar to testing conditions
As regards weldments, this Standard is applicable to aluminium alloys, selected stainless steels in the 300 series and alloys listed in Table 5 1.
This Standard is not applicable to listed materials whose behaviour differs at elevated temperature and in specific chemical.
This standard may be tailored for the specific characteristic and constrains of a space project in conformance with ECSS-S-ST-00.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16602-70-37:2014(Main)
Space product assurance - Determination of the susceptibility of metals to stress-corrosion cracking
SIST EN 16602-70-37:2015

This document defines the requirements for the evaluation of the susceptibility of the SCC resistance.
It defines the preferred way to determine the susceptibility of metals and weldments to stress-corrosion cracking by alternate immersion
in 3.5 % sodium chloride under constant load.
The results obtained from test programmes made according to this specification are used to classify alloys, weldments and their individual heat treatment conditions. When sufficient stress-corrosion data exists, the alloy designations can be submitted for inclusion into the
various tables contained in ECSS-Q-ST-70-36.
In this document, the supplier is identified as the entity that performs the test.
This standard may be tailored for the specific characteristics and constrains of a space project in conformance with ECSS-S-ST-00.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16602-70-21:2014(Main)
Space product assurance - Flammability testing for the screening of space materials
SIST EN 16602-70-21:2015

This Standard defines a multi­test procedure for the determination of the flammability characteristics of non­metallic materials under a set of closely controlled conditions. The test procedure covers both individual materials and materials used in configuration. This Standard describes a series of tests to provide data for aid in the evaluation of the suitability of materials for use in a space vehicle crew compartment. The data obtained are in respect to the ease of ignition and the flame propagation characteristics of materials.
All non­metallic materials are inherently flammable, the degree to which this is true is dependant on the chemical nature of the material itself and the environment to which the material is exposed. In the closed environment of a manned spacecraft this can lead to a potentially dangerous situation and close control is therefore required.
This standard may be tailored for the specific characteristics and constrains of a space project in conformance with ECSS-S-ST-00.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16602-70-02:2014(Main)
Space product assurance - Thermal vacuum outgassing test for the screening of space materials
SIST EN 16602-70-02:2015

This Standard describes a thermal vacuum test to determine the outgassing screening properties of materials proposed for use in the fabrication of spacecraft and associated equipment, for vacuum facilities used for flight hardware tests and for certain launcher hardware.
This Standard covers the following:
• critical design parameters of the test system;
• critical test parameters such as temperature, time, pressure;
• material sample preparation;
• conditioning parameters for samples and collector plates;
• presentation of the test data;
• acceptance criteria;
• certification of test systems and their operators by audits and round robin tests.
The test described in this Standard is applicable for all unmanned spacecraft, launchers, payloads, experiments. The test is also valid for external hardware of inhabited space systems and for hardware to be used in terrestrial vacuum test facilities.
The outgassing and condensation acceptance criteria for a material depend upon the application and location of the material and can be more severe than the standard requirements as given in clause 5.5.3.1.
This standard may be tailored for the specific characteristics and constrains of a space project in conformance with ECSS‐S‐ST‐00. 7

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12299:2024(Main)
Railway applications - Ride comfort for passengers - Measurement and evaluation
SIST EN 12299:2024

The purpose of this document is to provide methods for quantifying the ride comfort of a passenger in a rail vehicle in response to the track sections it is operated over.
The methods aim to quantify the effects of vehicle body motions on ride comfort and to make the assessment of passenger comfort predictable, repeatable, objective and meaningful.
The methods and comfort scales are validated for people of good health.
This document applies to passengers in rail vehicles operating on heavy rail networks.
This document applies to measurements of motions. It also applies to simulated motions. Guidance is provided on:
-   which method described within the document should be used for different scenarios;
-   typical values for different comfort levels;
-   the application of simulation.
This document excludes health and safety issues, non-passenger carrying vehicles, vehicle homologation and safety, limit values, motion sickness, discomfort caused by accelerating and braking, design guidelines and measurement technology.

  • Draft
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19403-4:2024(Main)
Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension (ISO 19403-4:2024)
kSIST FprEN ISO 19403-4:2024

This document specifies a test method to determine the polar and dispersive fractions of the surface tension of liquids from an interfacial tension with optical methods. The method can be applied for the characterization of liquid coating materials, especially if drying effects occur during alternative measurement. If applied to liquids with non-Newtonian flow behaviour (see ISO 3219-1:2021, 3.22), restrictions can apply.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17966:2024(Main)
Fire protection equipment - Carbon dioxide extinguishing systems for use on premises - Design and installation (ISO 6183:2022, modified)
SIST EN 17966:2024

This document specifies requirements and gives recommendations for the design, installation, testing, maintenance and safety of fixed carbon dioxide firefighting systems in buildings, plants or other structures. It is not applicable to extinguishing systems on ships, in aircraft, on vehicles or on mobile fire appliances, or to below ground systems in the mining industry; nor does it apply to carbon dioxide pre-inerting systems.
Design of systems where unclosable opening(s) of the protected volume exceed a specified area and where the opening(s) can be subject to the effect of wind is not specified, although general guidance on the procedure to be followed in such cases is given (see 7.4.3.2).

  • Draft
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 16931-8:2024(Main)
Electronic invoicing - Part 8: Semantic data model of the elements of an e-receipt or a simplified electronic invoice
kSIST FprEN 16931-8:2024

This document establishes a semantic data model of an e-receipt or a simplified electronic invoice.
NOTE   In the remainder of this document, when “e-receipt” is mentioned, “simplified invoice” is also meant.
The semantic model includes essential information elements that an electronic receipt needs to ensure legal (including fiscal) compliance and to enable interoperability for cross-border, cross sector and domestic trade. The semantic model can be used by organizations in the private and the public sector for documenting by issuing a receipt for the purchase of services and /or goods. It can also be used for documenting a purchase between private sector enterprises. In addition, it has been designed for the use of consumers.

  • Draft
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day