EN ISO 14919:2015
(Main)Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO 14919:2015)
Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO 14919:2015)
ISO 14919:2015 specifies requirements for classification of metal and non-metal wires (solid and cored), rods, cords processed by means of thermal spraying, especially by arc and flame spraying.
Thermisches Spritzen - Drähte, Stäbe und Schnüre zum Flammspritzen und Lichtbogenspritzen - Einteilung - Technische Lieferbedingungen (ISO 14919:2015)
In dieser Internationalen Norm werden die Anforderungen für die Einteilung von metallischen und nichtmetallischen Drähten (Massivdraht und Fülldraht), Stäben und Schnüren, die durch die Verfahren des thermischen Spritzens, insbesondere durch Flamm- und Lichtbogenspritzen, verarbeitet werden, festgelegt.
Projection thermique - Fils, baguettes et cordons pour projection thermique à l'arc et au pistolet dans une flamme - Classification - Conditions techniques d'approvisionnement (ISO 14919:2015)
L'ISO 14919:2015 spécifie les exigences en matière de classification des fils métalliques et non métalliques (pleins et fourrés), des baguettes, des cordons traités par projection thermique, notamment les procédés à l'arc et dans la flamme.
Vroče brizganje - Žice, palice in vrvi za plamensko in obločno brizganje - Klasifikacija - Tehnični dobavni pogoji (ISO 14919:2015)
Dokument določa zahteve za razvrščanje kovinskih in nekovinskih žic (masivnih in strženskih žic), palic, kablov, obdelanih z vročim brizganjem, zlasti z obločnim in plamenskim brizganjem.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2015
1DGRPHãþD
SIST EN ISO 14919:2002
9URþHEUL]JDQMHäLFHSDOLFHLQYUYL]DSODPHQVNRLQREORþQREUL]JDQMH
.ODVLILNDFLMD7HKQLþQLGREDYQLSRJRML ,62
Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification -
Technical supply conditions (ISO 14919:2015)
Thermisches Spritzen - Drähte, Stäbe und Schnüre zum Flammspritzen und
Lichtbogenspritzen - Einteilung - Technische Lieferbedingungen (ISO 14919:2015)
Projection thermique - Fils, baguettes et cordons pour projection thermique à l'arc et au
pistolet dans une flamme - Classification - Conditions techniques d'approvisionnement
(ISO 14919:2015)
Ta slovenski standard je istoveten z: EN ISO 14919:2015
ICS:
25.220.20 Površinska obdelava Surface treatment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 14919
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2015
ICS 25.220.20 Supersedes EN ISO 14919:2001
English Version
Thermal spraying - Wires, rods and cords for flame and arc
spraying - Classification - Technical supply conditions (ISO
14919:2015)
Projection thermique - Fils, baguettes et cordons pour Thermisches Spritzen - Drähte, Stäbe und Schnüre zum
projection thermique à l'arc et au pistolet dans une flamme - Flammspritzen und Lichtbogenspritzen - Einteilung -
Classification - Conditions techniques d'approvisionnement Technische Lieferbedingungen (ISO 14919:2015)
(ISO 14919:2015)
This European Standard was approved by CEN on 25 October 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14919:2015 E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 14919:2015) has been prepared by Technical Committee CEN/TC 240 “Thermal
spraying and thermally sprayed coatings” the secretariat of which is held by DIN, in collaboration with
Technical Committee ISO/TC 107 "Metallic and other inorganic coatings".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by July 2015, and conflicting national standards shall be withdrawn at the
latest by July 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14919:2001.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 14919:2015 has been approved by CEN as EN ISO 14919:2015 without any modification.
INTERNATIONAL ISO
STANDARD 14919
Second edition
2015-01-15
Thermal spraying — Wires, rods and
cords for flame and arc spraying —
Classification — Technical supply
conditions
Projection thermique — Fils, baguettes et cordons pour projection
thermique à l’arc et au pistolet dans une flamme — Classification —
Conditions techniques d’approvisionnement
Reference number
ISO 14919:2015(E)
©
ISO 2015
ISO 14919:2015(E)
© ISO 2015
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2015 – All rights reserved
ISO 14919:2015(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Classification . 1
3.1 Classification according to the manufacturing process and resulting structure . 1
3.2 Classification according to material groups and chemical composition . 1
3.2.1 Tin and tin alloys . 2
3.2.2 Zinc and zinc alloys . 3
3.2.3 Aluminium and aluminium alloys . 4
3.2.4 Copper and copper alloys . 5
3.2.5 Iron and iron alloys . 6
3.2.6 Nickel and nickel alloys . 8
3.2.7 Molybdenum . 9
3.2.8 Ceramics . 9
4 Sizes and tolerances .10
5 Properties .11
5.1 Mechanical properties .11
5.2 Surface properties .11
5.3 Workability: Winding of wires .12
6 Designation .12
7 Technical supply conditions .12
7.1 Forms of delivery .12
7.2 Identification .14
7.3 Packaging and storage .14
8 Inspection documents .14
ISO 14919:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT) see the following URL: Foreword - Supplementary information
ISO 14919 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 240, Thermal spraying and thermally sprayed coatings, in collaboration with ISO Technical
Committee ISO/TC 107, Metallic and other inorganic coatings, in accordance with the agreement on
technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 14919:2001), which has been
technically revised.
iv © ISO 2015 – All rights reserved
ISO 14919:2015(E)
Introduction
Requests for official interpretations of any aspect of this standard should be directed to the secretariat
of ISO/TC 107/WG 1 via your national standards body; a complete listing can be found at www.iso.org.
INTERNATIONAL STANDARD ISO 14919:2015(E)
Thermal spraying — Wires, rods and cords for flame and
arc spraying — Classification — Technical supply conditions
1 Scope
This International Standard specifies requirements for classification of metal and non-metal wires (solid
and cored), rods, cords processed by means of thermal spraying, especially by arc and flame spraying.
2 Normative references
The following documents, in whole or in part, are normatively re
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.