EN ISO 6270:1995

Paints and varnishes - Determination of resistance to humidity (continuous condensation) (ISO 6270:1980)

describes the test which determines the regularity of impedance of r.f. cables by measuring the return loss in the frequency domain using a vector network analyser equipped with a reflection test set (bridge) and transferring the results into the time domain by using the Inverse Discrete Fourier Transformation (IDFT).

Lacke und Anstrichstoffe - Bestimmung der Beständigkeit gegen Feuchtigkeit (kontinuierliche Kondensation) (ISO 6270:1980)

Diese Internationale Norm legt ein Verfahren zur Bestimmung der Beständigkeit von Beschichtungen, Beschichtungssystemen und verwandeten Produkten unter den Bedingungen hoher Feuchtigkeit fest. Das Verfahren ist anwendbar bei Beschichtungen sowohl auf porösen Untergründen, wie Holz, Gips und Gipskartonplatten als auch auf nichtporösen Untergründen, wie Metallen. Es gibt Hinweise, wie sich die Beschichtung unter solchen Beanspruchungen verhaltenwird, bei denen kontinuirliche Kondensation auf der Oberfläche auftritt.

Peintures et vernis - Détermination de la résistance à l'humidité (par condensation continue) (ISO 6270:1980)

décrit un essai qui détermine la régularité d'impédance des câbles pour fréquences radioélectriques (RF) en mesurant la perte par réflexions dans le domaine fréquentiel. Cette mesure est effectuée en utilisant un analyseur vectoriel de réseaux équipé d'un mesureur de réflexion (pont) et en transposant les résultats obtenus dans le domaine temporel en utilisant la Transformée Inverse de Fourier Discrète (TIFD).

Barve in laki - Določanje odpornosti proti vlagi (kontinuirna izpostava) (ISO 6270:1980)

General Information

• Status: Withdrawn
• Publication Date: 30-Mar-1995
• Withdrawal Date: 07-Aug-2001
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 08-Aug-2001
• Completion Date: 08-Aug-2001
• Ref Project: SIST EN ISO 6270:1997 - Paints and varnishes - Determination of resistance to humidity (continuous condensation) (ISO 6270:1980)

Relations

• Replaced By: EN ISO 6270-1:2001 - Paints and varnishes - Determination of resistance to humidity - Part 1: Continuous condensation (ISO 6270-1:1998)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 6270:1997
01-december-1997
%DUYHLQODNL'RORþDQMHRGSRUQRVWLSURWLYODJLNRQWLQXLUQDL]SRVWDYD,62

Paints and varnishes - Determination of resistance to humidity (continuous
condensation) (ISO 6270:1980)
Lacke und Anstrichstoffe - Bestimmung der Beständigkeit gegen Feuchtigkeit
(kontinuierliche Kondensation) (ISO 6270:1980)
Peintures et vernis - Détermination de la résistance a l'humidité (par condensation
continue) (ISO 6270:1980)
Ta slovenski standard je istoveten z: EN ISO 6270:1995
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 6270:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 6270:1997

---------------------- Page: 2 ----------------------

SIST EN ISO 6270:1997

---------------------- Page: 3 ----------------------

SIST EN ISO 6270:1997

---------------------- Page: 4 ----------------------

SIST EN ISO 6270:1997

---------------------- Page: 5 ----------------------

SIST EN ISO 6270:1997

---------------------- Page: 6 ----------------------

SIST EN ISO 6270:1997
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDlZATlON*MEWYHAPOAHAR OPrAHH3AUMR Il0 CTAHAAPTLl3AULlHWRGANlSATlON INTERNATIONALE DE NORMALISATION
Paints and varnishes - Determination of resistance to
humidity (continuous condensation)
Peintures et vernis - Détermination de la résistance à /'humidité (par condensation continue)
First edition - 1980-04-01
UDC 667.613 : 535.685
Ref. No. is0 6270-1980 (E)
Descriptors : paints, varnishes, tests, water vapour tests, test equipment.
Price based on 3 pages

---------------------- Page: 7 ----------------------

SIST EN ISO 6270:1997
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards institutes (IS0 member bodies). The work of developing Inter-
national Standards is carried out through IS0 technical committees. Every member
body interested in a subject for which a technical committee has been set up has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council.
International Standard IS0 6270 was developed by Technical Committee ISO/TC 35,
Paints and varnishes, and was circulated to the member bodies in May 1978.
It has been approved by the member bodies of the following countries :
Poland
Australia Iran
Austria Israel Romania
of
Brazil Italy South Africa, Rep.
Kenya Sweden
Bulgaria
Canada Korea, Rep. of Switzerland
Egypt, Arab Rep. of Mexico Turkey
Netherlands United Kingdom .
France
Germany, F. R. New Zealand USSR
India Norway
No member body expressed disapproval of the document.
O International Organization for Standardization, 1980 O
Printed in Switzerland

---------------------- Page: 8 ----------------------

SIST EN ISO 6270:1997
INTERNATIONAL STANDARD IS0 6270-1980 (E)
Paints and varnishes - Determination of resistance to
h u m id ity (con t i n u ous con densat io n)
O Introduction
exposure where continuous condensation occurs on the sur-
face.
This International Standard is one of a series of standards deal-
ing with the sampling and testing of paints, varnishes and
1.3 The procedure may reveal failures of the coating (in-
related products. It should be read in conjunction with(
cluding blistering, staining, softening, wrinkling and embrittle-
IS0 1513, IS0 1514, IS0 2808 and IS0 3270.
IS0 1512,
ment) and deterioration of the substrate.
The method of test specified requires to be completed for any
particular application by the following supplementary informa-
2 References
tion. This information shall be derived from the International
Standard or national standard or other document for the pro-
IS0 1512, Paints and varnishes - Sampling.
duct under test or, if appropriate, shall be the subject of agree-
ment between the interested parties.
IS0 1513, Paints and varnishes - Examination andpreparation
of samples for testing.
a) Material, thickness and surface preparation of
su bstrate.
IS0 1514, Paints and varnishes - Standard panels for testing.
b) Method of application of test coating and details of
IS0 2808, Paints and varnishes - Determination of film
sealing of edges and backs of the test panels (if required).
thickness.
c) Thickness, in micrometres, of the dry coating, including
IS0 3270, Paints and varnishes and their raw materials -
method of measurement and whether it is a single coating
Atmospheres for conditioning and testing.
or a multicoat system.
d) Duration and conditions of drying of coated test panels
(or conditions of stoving and ageing, if applicable) before
3 Apparatus
testing.
3.1 The apparatus consists essentially of an electrically
e) Duration of test period, including whether the test
heated water bath, so constructed that the cover is formed by
period is to be interrupted at intervals (for example during
the blanking panels (see 3.5) or the test panels, the upper faces
weekends).
of which are exposed to the environment (see 3.2). It is
preferable for the apparatus to be so designed that it will ac-
f) When inspection of the test coating is to be carried out,
commodate test panels of size 150 mm x 100 mm.
including details of recovery period if applicable.
The apparatus shall be constructed
...