EN ISO 6270-1:2001
(Main)Paints and varnishes - Determination of resistance to humidity - Part 1: Continuous condensation (ISO 6270-1:1998)
Paints and varnishes - Determination of resistance to humidity - Part 1: Continuous condensation (ISO 6270-1:1998)
Migrated from Progress Sheet (TC Comment) (2000-07-10): Revision, in parts, of EN ISO 6270:1995 (CC/000121)
Beschichtungsstoffe - Bestimmung der Beständigkeit gegen Feuchtigkeit - Teil 1: Kontinuierliche Kondensation (ISO 6270-1:1998)
Dieser Teil von ISO 6270 gehört zu einer Reihe von Normen, welche die Probenahme und die Prüfung von Beschichtungsstoffen, wie Lacke und Anstrichstoffe, behandelt.
Er legt ein Verfahren zum Bestimmen der Beständigkeit von Beschichtungen, Beschichtungssystemen und ähnlichen Produkten unter den Bedingungen hoher Feuchtigkeit fest, entsprechend den Anforderungen in Beschichtungs- oder Produktspezifikationen.
Das Verfahren ist anwendbar bei Beschichtungen sowohl auf porösen Substraten wie Holz, Gips und Gipskarton, als auch auf nicht porösen Substraten, wie Metallen. Es gibt Hinweise, wie sich die Beschichtung unter Belastungsbedingungen verhalten wird, bei denen kontinuierliche Kondensation auf der Oberfläche auftritt.
Peintures et vernis - Détermination de la résistance à l'humidité - Partie 1: Condensation continue (ISO 6270-1:1998)
Barve in laki - Določevanje odpornosti proti vlagi - 1. del: Kontinuirna kondenzacija (ISO 6270-1:1998)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2002
1DGRPHãþD
SIST EN ISO 6270:1997
%DUYHLQODNL'RORþHYDQMHRGSRUQRVWLSURWLYODJLGHO .RQWLQXLUQD
NRQGHQ]DFLMD ,62
Paints and varnishes - Determination of resistance to humidity - Part 1: Continuous
condensation (ISO 6270-1:1998)
Beschichtungsstoffe - Bestimmung der Beständigkeit gegen Feuchtigkeit - Teil 1:
Kontinuierliche Kondensation (ISO 6270-1:1998)
Peintures et vernis - Détermination de la résistance a l'humidité - Partie 1: Condensation
continue (ISO 6270-1:1998)
Ta slovenski standard je istoveten z: EN ISO 6270-1:2001
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 6270-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2001
ICS 87.040
English version
Paints and varnishes - Determination of resistance to humidity -
Part 1: Continuous condensation (ISO 6270-1:1998)
Peintures et vernis - Détermination de la résistance à Beschichtungsstoffe - Bestimmung der Beständigkeit
l'humidité - Partie 1: Condensation continue (ISO 6270- gegen Feuchtigkeit - Teil 1: Kontinuierliche Kondensation
1:1998) (ISO 6270-1:1998)
This European Standard was approved by CEN on 29 June 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6270-1:2001 E
worldwide for CEN national Members.
CORRECTED 2001-11-07
Foreword
The text of the International Standard from Technical Committee ISO/TC 35 "Paints and
varnishes" of the International Organization for Standardization (ISO) has been taken over as an
European Standard by Technical Committee CEN/TC 139 "Paints and varnishes", the
secretariat of which is held by DIN.
This European Standard supersedes EN ISO 6270:1995.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by February 2002, and conflicting national
standards shall be withdrawn at the latest by February 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of the International Standard ISO 6270-1:1998 has been approved by CEN as a
European Standard without any modification.
NOTE: Normative references to International Standards are listed in annex ZA (normative).
Annex ZA (normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 1513 1992 Paints and varnishes - Examination and EN ISO 1513 1994
preparation of samples for testing
ISO 1514 1993 Paints and varnishes - Standard panels EN ISO 1514 1997
for testing
ISO 2808 1997 Paints and varnishes - Determination of EN ISO 2808 1999
film thickness
ISO 3270 1984 Paints and varnishes and their raw EN 23270 1991
materials - Temperatures and humidities
for conditioning and testing
ISO 3696 1987 Water for analytical laboratory use - EN ISO 3696 1995
Specification and test methods
INTERNATIONAL ISO
STANDARD 6270-1
First edition
1998-04-01
Paints and varnishes — Determination of
resistance to humidity —
Part 1:
Continuous condensation
Peintures et vernis — Détermination de la résistance à l'humidité —
Partie 1: Condensation continue
A
Reference number
ISO 6270-1:1998(E)
ISO 6270-1:1998(E)
Contents Page
1 Scope . 1
2 Normative references. 1
3 Principle. 2
4 Required supplementary information . 2
5 Apparatus. 2
Sampling .
6 2
Test panels.
7 3
8 Method of exposure of test panels. 3
9 Examination of test panels . 3
10 Precision . 4
11 Test report. 4
Annex A (normative) Required supplementary information. 5
© ISO 1998
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet central@iso.ch
X.400 c=ch; a=400net; p=iso; o=isocs; s=central
Printed in Switzerland
ii
©
ISO ISO 6270-1:1998(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 6270-1 was prepared by Technical Committee
ISO/TC 35, Paints and varnishes, Subcommittee 9, General test methods
for paints and varnishes.
It cancels and replaces ISO 6270:1980, of which it constitutes a minor
technical revision.
It differs from ISO 6270:1980 in that the angle of the panels to the
horizontal has been changed from (15 ± 5)° to (60 ± 5)° and the
temperature of the air below the panels is maintained at (38 ± 2) °C rather
than at that of the water itself. Work has shown that the results do not differ
substantially between the two sets of conditions.
At the date of publication, ISO 6270 consisted of only one part, under the
general title Paints and varnishes – Determination of resistance to
humidity:
– Part 1: Continuous condensation
Other parts will be added at a later date. One of these parts will be
ISO 11503:1995, Paints and varnishes – Determination of resistance to
humidity (intermittent condensation), which will be renumbered into this
series.
Annex A forms an integral part of this part of ISO 6270.
iii
©
INTERNATIONAL STANDARD ISO ISO 6270-1:1998(E)
Paints and varnishes — Determination of resistance to humidity —
Part 1:
Continuous condensation
1 Scope
This part of ISO 6270 is one of a series of standards dealing with the sampling and testing of paints, varnishes and
related products.
It specifies a method for determining the resistance of paint films, paints systems and related products to conditions
of high humidity in accordance with the requirements of coating or product specifications.
The method is applicable to coatings both on porous substrates such as wood, plaster and plasterboard and on
non-porous substrates such as metal. It provides an indication of the performance likely to be obtained under
severe conditions of exposure where continuous condensation occurs on the surface.
The procedure may reveal failures of the coating (including blistering, staining, softening, wrinkling and
embrittlement) and deterioration of the substrate.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this part of
ISO 6270. At the time of publication, the editions indicated were valid. All standards are subject to revision, and
parties
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.