EN ISO 12216:2022/A11:2023
(Amendment)Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements
Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements
Kleine Wasserfahrzeuge - Fenster, Bullaugen, Luken, Seeschlagblenden und Türen - Anforderungen an die Festigkeit und Wasserdichtheit (ISO 12216:2022)
No scope available
Petits navires - Fenêtres, hublots, panneaux, tapes et portes - Exigences de résistance et d'étanchéité (EN ISO 12216:2022/Amd 11:2023)
No scope available
Mala plovila - Okna, lopute, pokrovi in vrata - Zahteve za trdnost in odpornost proti vodi - Dopolnilo A11
General Information
Relations
Overview
EN ISO 12216:2022/A11:2023 is a CEN amendment to the European/ISO standard that addresses strength and watertightness requirements for small craft windows, portlights, hatches, deadlights and doors. Published April 2023 and approved 15 February 2023, this amendment (A11) updates EN ISO 12216:2022 to clarify requirements used for design, testing and conformity assessment of prefabricated and fitted openings in hulls, decks and superstructures. The document also includes Annex ZA that maps the standard to the essential requirements of Directive 2013/53/EU (Recreational Craft Directive) for presumption of conformity when cited in the Official Journal.
Key topics and technical requirements
- Strength requirements for glazing, frames and closing mechanisms to ensure structural integrity of openings on small craft.
- Watertightness and weathertightness provisions to reduce ingress of water through windows, portlights, hatches and doors under operational and environmental loads.
- Documentation and owner’s manual content references (see clauses linked in Annex ZA) that support safe use, maintenance and risk management.
- Conformity and regulatory linkage: Annex ZA provides the relationship with Directive 2013/53/EU and lists normative references that must be used to claim presumption of conformity.
- Normative references to relevant test and material standards (see Related Standards) that are normatively referenced and indispensable for applying the standard.
Practical applications
- Provides a harmonized technical basis for designing and specifying windows, portlights, hatches and doors on small craft to meet safety and performance expectations.
- Guides manufacturers and component suppliers on required performance characteristics and documentation to support EU conformity.
- Directs test laboratories and inspection bodies on referenced test methods and related standards needed to verify strength and watertightness.
- Assists naval architects, boatbuilders and certification bodies in selecting compliant components and preparing technical files for market access under the Recreational Craft Directive.
Who should use this standard
- Small craft manufacturers and OEMs
- Component suppliers (glazing, frames, hatch manufacturers)
- Design engineers and naval architects
- Testing laboratories, classification societies and regulators
- Compliance officers preparing Declaration of Conformity for EU market
Related standards
Normative references in Annex ZA include (non‑exhaustive): ISO 6603-1:2000, ISO 11336-1:2012, ISO 12217 series (2015), and European standards such as EN 356:1999 and EN 1063:1999. These referenced standards are integral when applying EN ISO 12216:2022/A11:2023 for testing and conformity purposes.
Keywords: EN ISO 12216:2022/A11:2023, small craft, windows, portlights, hatches, deadlights, doors, strength, watertightness, Directive 2013/53/EU, CEN, conformity, testing.
Frequently Asked Questions
EN ISO 12216:2022/A11:2023 is a amendment published by the European Committee for Standardization (CEN). Its full title is "Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements". This standard covers: No scope available
No scope available
EN ISO 12216:2022/A11:2023 is classified under the following ICS (International Classification for Standards) categories: 47.080 - Small craft. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 12216:2022/A11:2023 has the following relationships with other standards: It is inter standard links to EN ISO 12216:2022. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 12216:2022/A11:2023 is associated with the following European legislation: EU Directives/Regulations: 2013/53/EU; Standardization Mandates: M/542. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN ISO 12216:2022/A11:2023 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2023
Mala plovila - Okna, lopute, pokrovi in vrata - Zahteve za trdnost in odpornost proti
vodi - Dopolnilo A11
Small craft - Windows, portlights, hatches, deadlights and doors - Strength and
watertightness requirements
Kleine Wasserfahrzeuge - Fenster, Bullaugen, Luken, Seeschlagblenden und Türen -
Anforderungen an die Festigkeit und Wasserdichtheit
Petits navires - Fenêtres, hublots, panneaux, tapes et portes - Exigences de résistance
et d'étanchéité
Ta slovenski standard je istoveten z: EN ISO 12216:2022/A11:2023
ICS:
47.080 Čolni Small craft
91.060.50 Vrata in okna Doors and windows
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 12216:2022/A11
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2023
EUROPÄISCHE NORM
ICS 47.080
English Version
Small craft - Windows, portlights, hatches, deadlights and
doors - Strength and watertightness requirements
Petits navires - Fenêtres, hublots, panneaux, tapes et Kleine Wasserfahrzeuge - Fenster, Bullaugen, Luken,
portes - Exigences de résistance et d'étanchéité Seeschlagblenden und Türen - Anforderungen an die
Festigkeit und Wasserdichtheit
This amendment A11 modifies the European Standard EN ISO 12216:2022; it was approved by CEN on 15 February 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12216:2022/A11:2023 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered . 4
European foreword
This document (EN ISO 12216:2022/A11:2023) has been prepared by Technical Committee CEN/TC
464 “Small Craft” the secretariat of which is held by SIS.
This Amendment to the European Standard EN ISO 12216:2022 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by October 2023,
and conflicting national standards shall be withdrawn at the latest by October 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For the relationship with EU Directive(s) / Regulation(s), see informative Annex ZA, which is an integral
part of this document.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulg
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...