SIST EN ISO 12216:2022/A11:2023

Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements

Kleine Wasserfahrzeuge - Fenster, Bullaugen, Luken, Seeschlagblenden und Türen - Anforderungen an die Festigkeit und Wasserdichtheit

No scope available

Petits navires - Fenêtres, hublots, panneaux, tapes et portes - Exigences de résistance et d'étanchéité

No scope available

Mala plovila - Okna, lopute, pokrovi in vrata - Zahteve za trdnost in odpornost proti vodi - Dopolnilo A11

General Information

• Status: Published
• Publication Date: 11-May-2023
• ICS: 47.080 - Small craft
• ICS: 91.060.50 - Doors and windows
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 09-May-2023
• Due Date: 14-Jul-2023
• Completion Date: 12-May-2023
• Directive: 2013/53/EU - Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC
• Mandate: M/542 - [C(2015)8736] Standardisation Request to the European Committee for Standardisation and the European Committee for Electro-technical Standardisation as regards recreational craft and personal watercraft in support of Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC.
• Ref Project: EN ISO 12216:2022/A11:2023 - Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements

Relations

• Amends: SIST EN ISO 12216:2022 - Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements (ISO 12216:2020)
• Effective Date: 06-Mar-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12216:2022/A11:2023
01-julij-2023
Mala plovila - Okna, lopute, pokrovi in vrata - Zahteve za trdnost in odpornost proti
vodi - Dopolnilo A11
Small craft - Windows, portlights, hatches, deadlights and doors - Strength and
watertightness requirements
Kleine Wasserfahrzeuge - Fenster, Bullaugen, Luken, Seeschlagblenden und Türen -
Anforderungen an die Festigkeit und Wasserdichtheit
Petits navires - Fenêtres, hublots, panneaux, tapes et portes - Exigences de résistance
et d'étanchéité
Ta slovenski standard je istoveten z: EN ISO 12216:2022/A11:2023
ICS:
47.080 Čolni Small craft
91.060.50 Vrata in okna Doors and windows
SIST EN ISO 12216:2022/A11:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 12216:2022/A11:2023

---------------------- Page: 2 ----------------------
SIST EN ISO 12216:2022/A11:2023


EN ISO 12216:2022/A11
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2023
EUROPÄISCHE NORM
ICS 47.080
English Version

Small craft - Windows, portlights, hatches, deadlights and
doors - Strength and watertightness requirements
Petits navires - Fenêtres, hublots, panneaux, tapes et Kleine Wasserfahrzeuge - Fenster, Bullaugen, Luken,
portes - Exigences de résistance et d'étanchéité Seeschlagblenden und Türen - Anforderungen an die
Festigkeit und Wasserdichtheit
This amendment A11 modifies the European Standard EN ISO 12216:2022; it was approved by CEN on 15 February 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12216:2022/A11:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 12216:2022/A11:2023
EN ISO 12216:2022/A11:2023 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered . 4

2

---------------------- Page: 4 ----------------------
SIST EN ISO 12216:2022/A11:2023
EN ISO 12216:2022/A11:2023 (E)
European foreword
This document (EN ISO 12216:2022/A11:2023) has been prepared by Technical Committee CEN/TC
464 “Small Craft” the secretariat of which is held by SIS.
This Amendment to the European Standard EN ISO 12216:2022 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by October 2023,
and conflicting national standards shall be withdrawn at the latest by October 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For the relationship with EU Directive(s) / Regulation(s), see informative Annex ZA, which is an integral
part of this document.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulg
...