Stationary training equipment - Part 5: Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods (ISO 20957-5:2016)

ISO 20957-5:2016 specifies safety requirements for stationary exercise bicycles and upper body crank training equipment in addition to the general safety requirements of ISO 20957‑1.
ISO 20957-5:2016 is applicable to stationary training equipment type stationary exercise bicycles and upper body crank training equipment (type 5) as defined in Clause 3 within the classes S, H, I and A, B, C according to ISO 20957‑1.
Any attachment provided with the stationary exercise bicycles and upper body crank training equipment for the performance of additional exercises are subject to the requirements of ISO 20957‑1.
ISO 20957-5:2016 is not applicable to roller stands as they cannot be made safe in a reasonable way.

Stationäre Trainingsgeräte - Teil 5: Stationäre Trainingsfahrräder und Kurbel-Trainingsgeräte für den Oberkörper, zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren (ISO 20957-5:2016)

Dieses Dokument legt sicherheitstechnische Anforderungen für stationäre Trainingsfahrräder und Kurbel-Trainingsgeräte für den Oberkörper fest, zusätzlich zu den allgemeinen sicherheitstechnischen Anforderungen nach ISO 20957 1.
Dieses Dokument gilt für stationäre Trainingsgeräte vom Typ stationäre Trainingsfahrräder und Kurbel-Trainingsgeräte für den Oberkörper (Typ 5), wie in Abschnitt 3 definiert, in den Klassen S, H, I und A, B, C nach ISO 20957-1.
Jedes Zusatzgerät, das zusammen mit stationären Trainingsfahrrädern und Kurbel-Trainingsgeräten für den Oberkörper zur Durchführung von zusätzlichen Übungen geliefert wird, unterliegt den Anforderungen nach ISO 20957 1.
Dieses Dokument gilt nicht für Rollenständer, da diese nicht in angemessener Weise gesichert werden können.

Équipement d'entraînement fixe - Partie 5: Bicyclettes fixes d'exercice et équipements d'entraînement à manivelles de la partie supérieure du corps - Exigences spécifiques de sécurité et méthodes d'essai supplémentaires (ISO 20957-5:2016)

ISO 20957-5:2016 spécifie les exigences de sécurité relatives aux bicyclettes fixes d'exercice et aux appareils d'entraînement à manivelles de la partie supérieure du corps, qui viennent compléter les exigences générales de sécurité de l'ISO 20957‑1.
ISO 20957-5:2016 s'applique aux appareils d'entraînement fixes du type bicyclettes fixes d'exercice et appareils d'entraînement à manivelles de la partie supérieure du corps (type 5), tels que définis à l'Article 3, appartenant aux classes S, H, I et A, B, C selon l'ISO 20957‑1.
Tout accessoire fourni avec les bicyclettes fixes d'exercice et les appareils d'entraînement à manivelles de la partie supérieure du corps pour la réalisation d'exercices supplémentaires est soumis aux exigences de l'ISO 20957‑1.
ISO 20957-5:2016 ne s'applique pas aux supports à rouleaux, car ils ne peuvent pas être sécurisés de manière raisonnable.

Nepremična oprema za vadbo - 5. del: Nepremična kolesa za vadbo in oprema za vadbo zgornjega dela telesa, dodatne posebne varnostne zahteve in preskusne metode (ISO 20957-5:2016)

Ta del standarda ISO 20957 določa varnostne zahteve za nepremična kolesa za vadbo in opremo za vadbo zgornjega dela telesa poleg splošnih varnostnih zahtev standarda ISO 20957 1. Ta del standarda ISO 20957 se uporablja za nepremično opremo za vadbo, nepremična kolesa za vadbo in opremo za vadbo zgornjega dela telesa (tip 5), kakor je opredeljeno v točki 3 razredov S, H, I in A, B, C v skladu s standardom ISO 20957-1. Za morebitne nastavke za nepremična kolesa za vadbo in opremo za vadbo zgornjega dela telesa, s katero se izvajajo dodatne vaje, veljajo zahteve standarda ISO 20957 1. Ta del standarda ISO 20957 se ne uporablja za valjčna stojala, pri katerih ni mogoče zagotoviti ustrezne varnosti.

General Information

Status
Published
Publication Date
20-Dec-2016
Withdrawal Date
29-Jun-2017
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
21-Dec-2016
Due Date
14-Jun-2017
Completion Date
21-Dec-2016

Relations

Buy Standard

Standard
EN ISO 20957-5:2017
English language
30 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 20957-5:2017
01-marec-2017
1DGRPHãþD
SIST EN 957-5:2009
1HSUHPLþQDRSUHPD]DYDGERGHO1HSUHPLþQDNROHVD]DYDGERLQRSUHPD]D
YDGER]JRUQMHJDGHODWHOHVDGRGDWQHSRVHEQHYDUQRVWQH]DKWHYHLQSUHVNXVQH
PHWRGH ,62
Stationary training equipment - Part 5: Stationary exercise bicycles and upper body crank
training equipment, additional specific safety requirements and test methods (ISO 20957-
5:2016)
Stationäre Trainingsgeräte - Teil 5: Stationäre Trainingsfahrräder und Kurbel-
Trainingsgeräte für den Oberkörper, zusätzliche besondere sicherheitstechnische
Anforderungen und Prüfverfahren (ISO 20957-5:2016)
Équipement d'entraînement fixe - Partie 5: Bicyclettes fixes d'exercice et équipements
d'entraînement à manivelles de la partie supérieure du corps - Exigences spécifiques de
sécurité et méthodes d'essai supplémentaires (ISO 20957-5:2016)
Ta slovenski standard je istoveten z: EN ISO 20957-5:2016
ICS:
97.220.30 Oprema za dvoranske športe Indoor sports equipment
SIST EN ISO 20957-5:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 20957-5:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 20957-5:2017


EN ISO 20957-5
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2016
EUROPÄISCHE NORM
ICS 97.220.30 Supersedes EN 957-5:2009
English Version

Stationary training equipment - Part 5: Stationary exercise
bicycles and upper body crank training equipment,
additional specific safety requirements and test methods
(ISO 20957-5:2016)
Équipement d'entraînement fixe - Partie 5: Bicyclettes Stationäre Trainingsgeräte - Teil 5: Stationäre
fixes d'exercice et équipements d'entraînement à Trainingsfahrräder und Kurbel-Trainingsgeräte für
manivelles de la partie supérieure du corps - Exigences den Oberkörper, zusätzliche besondere
spécifiques de sécurité et méthodes d'essai sicherheitstechnische Anforderungen und
supplémentaires (ISO 20957-5:2016) Prüfverfahren (ISO 20957-5:2016)
This European Standard was approved by CEN on 6 November 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20957-5:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 20957-5:2017
EN ISO 20957-5:2016 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 20957-5:2017
EN ISO 20957-5:2016 (E)
European foreword
This document (EN ISO 20957-5:2016) has been prepared by Technical Committee ISO/TC 83 "Sports
and other recreational facilities and equipment" in collaboration with Technical Committee
CEN/TC 136 “Sports, playground and other recreational facilities and equipment” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be
withdrawn at the latest by June 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 957-5:2009.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
Acco
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.