EN 6025:2021
(Main)Aerospace series - Plates - Aluminium alloy 2024 - Close tolerances flatness - Thickness - 6 mm < a ≤ 55 mm - Dimensions
Aerospace series - Plates - Aluminium alloy 2024 - Close tolerances flatness - Thickness - 6 mm < a ≤ 55 mm - Dimensions
This document specifies the dimensions and tolerances of plates in aluminium alloy 2024 with close-tolerance flatness, thickness 6 mm < a ≤ 55 mm, for aerospace applications.
Luft- und Raumfahrt - Platten - Aluminiumlegierung 2024 - Enge Ebenheitstoleranzen - Dicken - 6 mm < a ≤ 55 mm - Maße
Dieses Dokument legt die Maße und Grenzabweichungen von Platten aus Aluminiumlegierung 2024 mit engen Ebenheitstoleranzen, Dicken 6 mm < a ≤ 55 mm für Anwendungen in der Luft und Raumfahrt fest.
Série aérospatiale - Plaques - Alliage d'aluminium 2024 - Tolérances serrées de planéité - Epaisseur - 6 mm < a ≤ 55 mm - Dimensions
Le présent document spécifie les dimensions et tolérances des plaques en alliage d’aluminium 2024 avec des tolérances serrées de planéité et une épaisseur de 6 mm < a ≤ 55 mm, pour les applications aérospatiales.
Aeronavtika - Plošče - Aluminijeva zlitina 2024 - Odstopanja od tolerance ploskosti - Debelina - 6 mm ≤ a ≤ 55 mm - Mere
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2021
Aeronavtika - Plošče - Aluminijeva zlitina 2024 - Odstopanja od tolerance ploskosti
- Debelina - 6 mm ≤ a ≤ 55 mm - Mere
Aerospace series - Plates - Aluminium alloy 2024 - Close tolerance flatness - Thickness -
6 mm ≤ a ≤ 55 mm - Dimensions
Luft- und Raumfahrt - Platten - Aluminiumlegierung 2024 - Enge Ebenheitstoleranzen -
Dicken - 6 mm ≤ a ≤ 55 mm - Maße
Série aérospatiale - Plaques - Alliage d'aluminium 2024 - Tolérances serrées de planéité
- Epaisseurs - 6 mm ≤ a ≤ 55 mm - Dimensions
Ta slovenski standard je istoveten z: EN 6025:2021
ICS:
49.025.20 Aluminij Aluminium
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 6025
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2021
EUROPÄISCHE NORM
ICS 49.025.20
English Version
Aerospace series - Plates - Aluminium alloy 2024 - Close
tolerances flatness - Thickness - 6 mm ≤ a ≤ 55 mm -
Dimensions
Série aérospatiale - Plaques - Alliage d'aluminium 2024 Luft- und Raumfahrt - Platten - Aluminiumlegierung
- Tolérances serrées de planéité - Epaisseur - 6 mm ≤ a 2024 - Enge Ebenheitstoleranzen - Dicken - 6 mm ≤ a ≤
≤ 55 mm - Dimensions 55 mm - Maße
This European Standard was approved by CEN on 17 February 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 6025:2021 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Form. 4
5 Recommended dimensions and mass . 5
6 Tolerances . 5
7 Material . 8
8 Designation . 9
9 Technical specification . 9
European foreword
This document (EN 6025:2021) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this
document has received the approval of the National Associations and the Official Services of the
member countries of ASD, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2021, and conflicting national standards shall
be withdrawn at the latest by September 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this document: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Irelan
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.