EN ISO 14744-1:2008

Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2008)

ISO 14744-1:2008 specifies requirements for acceptance inspection of electron beam welding machines preferably when first installed on the user's premises.

Schweißen - Abnahmeprüfung von Elektronenstrahl-Schweißmaschinen - Teil 1: Grundlagen und Abnahmebedingungen (ISO 14744-1:2008)

Dieser Teil von ISO 14744 legt die Anforderungen für die Abnahmeprüfung von Elektronenstrahl-Schwei߬maschinen, vorzugsweise nach der Erstinstallation beim Anwender, fest.

Soudage - Essais de réception des machines de soudage par faisceau d'électrons - Partie 1: Principes et conditions de réception (ISO 14744-1:2008)

L'ISO 14744-1:2008 spécifie les prescriptions relatives aux essais de réception des machines de soudage par faisceau d'électrons, de préférence lorsqu'elles sont installées pour la première fois dans les locaux de l'utilisateur.

Varjenje - Prevzemna kontrola naprav za varjenje z elektronskim snopom - 1. del: Načela in prevzemni pogoji (ISO 14744-1:2008)

General Information

• Status: Published
• Publication Date: 30-Apr-2008
• Withdrawal Date: 29-Nov-2008
• ICS: 25.160.30 - Welding equipment
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 4 - Quality management in the field of welding
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-May-2008
• Due Date: 12-Jun-2009
• Completion Date: 01-May-2008
• Ref Project: SIST EN ISO 14744-1:2008 - Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2008)

Relations

• Replaces: EN ISO 14744-1:2000 - Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2000)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14744-1:2008
01-september-2008
1DGRPHãþD
SIST EN ISO 14744-1:2001
9DUMHQMH3UHY]HPQDNRQWURODQDSUDY]DYDUMHQMH]HOHNWURQVNLPVQRSRPGHO
1DþHODLQSUHY]HPQLSRJRML,62
Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles
and acceptance conditions (ISO 14744-1:2008)
Schweißen - Abnahmeprüfung von Elektronenstrahl-Schweißmaschinen - Teil 1:
Grundlagen und Abnahmebedingungen (ISO 14744-1:2008)
Soudage - Essais de réception des machines de soudage par faisceau d'électrons -
Partie 1: Principes et conditions de réception (ISO 14744-1:2008)
Ta slovenski standard je istoveten z: EN ISO 14744-1:2008
ICS:
25.160.30 Varilna oprema Welding equipment
SIST EN ISO 14744-1:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 14744-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2008
ICS 25.160.30 Supersedes EN ISO 14744-1:2000
English Version
Welding - Acceptance inspection of electron beam welding
machines - Part 1: Principles and acceptance conditions (ISO
14744-1:2008)
Soudage - Essais de réception des machines de soudage Schweißen - Abnahmeprüfung von Elektronenstrahl-
par faisceau d'électrons - Partie 1: Principes et conditions Schweißmaschinen - Teil 1: Grundlagen und
de réception (ISO 14744-1:2008) Abnahmebedingungen (ISO 14744-1:2008)
This European Standard was approved by CEN on 26 April 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14744-1:2008: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 14744-1:2008 (E)
Contents Page
Foreword.3

2

---------------------- Page: 3 ----------------------

EN ISO 14744-1:2008 (E)
Foreword
This document (EN ISO 14744-1:2008) has been prepared by Technical Committee ISO/TC 44 "Welding and
allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding” the secretariat of which is
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2008, and conflicting national standards shall be withdrawn
at the latest by November 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14744-1:2000.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 14744-1:2008 has been approved by CEN as a EN ISO 14744-1:2008 without any
modification.

3

---------------------- Page: 4 ----------------------

INTERNATIONAL ISO
STANDARD 14744-1
Second edition
2008-05-01

Welding — Acceptance inspection of
electron beam welding machines —
Part 1:
Principles and acceptance conditions
Soudage — Essais de réception des machines de soudage par
faisceau d'électrons —
Partie 1: Principes et conditions de réception




Reference number
ISO 14744-1:2008(E)
©
ISO 2008

---------
...