EN ISO 8560:1999

Technical drawings - Construction drawings - Representation of modular sizes, lines and grids (ISO 8560:1986)

In the rules laid down the basic module M is 100 mm (see ISO 1006).Planning and design work is made easier by modular sizes. Multimodular grids may be added, to a limited extent, in construction drawings for manufacturing and construction, for orientation and location.

Zeichnungen für das Bauwesen - Darstellung von modularen Größen, Linien und Rastern (ISO 8560:1986)

Diese Internationale Norm legt Regeln für die Darstellung von modularen Größen, Linien und Raster für Zeichnungen des Bauwesens fest. Der Grundmodul M ist 100 mm (siehe ISO 1006). Im Regelfall sollten modulare Größen in Konstruktions-Zeichnungen angewendet werden. Bau- und Ausführungsgrößen sollten in Fertigungs-Zeichnungen angewendet werden. Modulare Größen, Linien und Raster erleichtern die Arbeit bei Planung und Konsruktion.

Dessins techniques - Dessins de construction - Représentation des dimensions, lignes et quadrillages modulaires (ISO 8560:1986)

La présente Norme internationale prescrit des règles pour la représentation des dimensions, lignes et quadrillages modulaires sur des dessins de construction. Le module de base M est 100 mm (voir ISO 1006). En général, les dimensions modulaires devraient être utilisées sur des dessins de construction. Les dimensions de construction et de travail devraient être utilisées sur des dessins de production. Les dimensions, lignes et quadrillages modulaires facilitent le travail de planification et de conception. Les quadrillages multimodulaires peuvent être ajoutés sur des dessins de construction pour la fabrication et la construction, dans une certaine mesure, pour l'orientation et l'emplacement.

Tehnične risbe - Gradbeniške risbe - Prikazovanje modularnih mer, črt in mrež (ISO 8560:1986)

General Information

• Status: Withdrawn
• Publication Date: 20-Jul-1999
• Withdrawal Date: 30-Apr-2019
• ICS: 01.100.01 - Technical drawings in general
• Technical Committee: CEN/SS F01 - Technical drawings
• Drafting Committee: CEN/SS F01 - Technical drawings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 01-May-2019
• Ref Project: SIST EN ISO 8560:2002 - Technical drawings - Construction drawings - Representation of modular sizes, lines and grids (ISO 8560:1986)

Relations

• Replaced By: EN ISO 8560:2019 - Technical drawings - Construction drawings - Representation of modular sizes, lines and grids (ISO 8560:2019)
• Effective Date: 08-May-2019

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2002
7HKQLþQHULVEH*UDGEHQLãNHULVEH3ULND]RYDQMHPRGXODUQLKPHUþUWLQPUHå
,62
Technical drawings - Construction drawings - Representation of modular sizes, lines and
grids (ISO 8560:1986)
Zeichnungen für das Bauwesen - Darstellung von modularen Größen, Linien und
Rastern (ISO 8560:1986)
Dessins techniques - Dessins de construction - Représentation des dimensions, lignes et
quadrillages modulaires (ISO 8560:1986)
Ta slovenski standard je istoveten z: EN ISO 8560:1999
ICS:
01.100.30 *UDGEHQLQDþUWL Construction drawings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

Intern.ational Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWlEIK,4YHAPO~HAR OPrAHMJAl.#lR fl0 CTAHJIAPTH3AWlM.ORGANISATION INTERNATIONALE DE NORMALISATION
Construction drawings -
Technical drawings -
Representation of modular sizes, lines and grids
Dessins de construction - Reprbsen tation des dimensions, lignes et quadrilfages modulaires
Dessins techniques -
First edition - 1986-05-01
Ref. No. ISO 6560-1966 (EI
UDC 744.43 : 69 : 721.013
CG
Descriptors : drawings, technical drawings, construction, modules, schematic representation, dimensions, lines.
l
Price based on 5 pages
v)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards bodies (ISO member bodies). The work of preparing International
Standards is normally carried out through ISO technical committees. Esch member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in Iiaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council. They are approved in accordance with ISO procedures requiring at
least 75 Oh approval by the member bodies voting.
International Standard ISO 8560 was prepared by Technical Committee ISO/TC 10,
Technical dra wings.
Users should note that all International Standards undergo revision from time to time
and that any reference made herein to any other International Standard implies its
latest edition, unless otherwise stated.
0 International Organization for Standardkation, 1986 l
Printed in Switzerland
ii
Page
Contents
..........................................
Scope and field of application
References .
General .
sizes .
Designations of modular
................................
Representation of modular lines and sizes
........................................
Representation of modular grids
..........
Combination of modular sizes and work sizes on the same drawing
.........................................................
Bibliography
. . .
Ill
This page intentionally left blank

ISO 8560-1986 (E)
INTERNATIONAL STANDARD
Construction drawings -
Technical drawings -
Representation of modular sizes, lines and grids
4.2.4 Modular sizes: 1OM
1 Scope and field of application
This International Standard lays down rules for the represen-
10 x 3M,5 x 6M
4.2.5 Multimodular sizes :
tation of modular
...