EN ISO 8655-5:2002

Piston-operated volumetric apparatus - Part 5: Dispensers (ISO 8655-5:2002)

ISO 8655-5:2002 specifies metrological requirements, maximum permissible errors, requirements for marking and information to be provided for users for dispensers. It is applicable to dispensers with nominal volumes from 1 microlitre up to 200 millilitres, designed to deliver their volume (Ex).

Volumenmessgeräte mit Hubkolben - Teil 5: Dispenser (ISO 8655-5:2002)

Dieser Teil von ISO 8655 trifft Festlegungen hinsichtlich
¾ metrologischen Anforderungen,
¾ Fehlergrenzen,
¾ Anforderungen an die Kennzeichnung und
¾ Benutzerinformation
von Dispensern. Er gilt für Dispenser mit Nennvolumina von 1 µl bis 200 ml, die auf Ablauf (Ex) justiert sind.  
ANMERKUNG   Allgemeine Anforderungen und Begriffsdefinitionen für Kolbenhubgeräte sind in ISO 8655-1 festgelegt. Die Konformitätsprüfung (Baumusterbewertung) von Kolbenhubgeräten ist  in ISO 8655-6 festgelegt. Alternative Prüfverfahren, wie die photometrische und titrimetrische Prüfung werden Gegenstand des zukünftigen Teils 7 von ISO 8655 sein. Hinsichtlich aller anderen Prüfungen (z.B. Qualitätssicherung des Anbieters, analytische Qualitätssicherung und Prüfmittelüberwachung des Anwenders) siehe ISO 8655-6 oder alternative Prüfverfahren. Für Sicherheitsanforderungen an elektrisch betriebene Dispensern siehe IEC 61010-1.

Appareils volumétriques à piston - Partie 5: Dispenseurs (ISO 8655-5:2002)

L'ISO 8655-5:2002 spécifie les exigences métrologiques, les erreurs maximales tolérées, les exigences de marquage et les informations à remettre aux utilisateurs, pour les distributeurs. Elle est applicable aux distributeurs avec des volumes nominaux allant de 1 microlitre à 200 millilitres, conçus pour distribuer leur volume (Ex).

Volumetrične naprave, delujoče na bat - 5. del: Razdeljevalci (ISO 8655-5:2002)

General Information

• Status: Withdrawn
• Publication Date: 14-Sep-2002
• Withdrawal Date: 10-May-2022
• ICS: 17.060 - Measurement of volume, mass, density, viscosity
• Technical Committee: CEN/TC 332 - Laboratory equipment
• Drafting Committee: CEN/TC 332/WG 1 - Glass and plastics devices including volumetric instruments
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 11-May-2022
• Ref Project: SIST EN ISO 8655-5:2002 - Piston-operated volumetric apparatus - Part 5: Dispensers (ISO 8655-5:2002)

Relations

• Replaced By: EN ISO 8655-5:2022 - Piston-operated volumetric apparatus - Part 5: Dispensers (ISO 8655-5:2022)
• Effective Date: 11-Apr-2018
• Corrected By: EN ISO 8655-5:2002/AC:2009 - Piston-operated volumetric apparatus - Part 5: Dispensers (ISO 8655-5:2002/Cor 1:2008)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Volumenmessgeräte mit Hubkolben - Teil 5: Dispenser (ISO 8655-5:2002)Appareils volumétriques a piston - Partie 5: Dispenseurs (ISO 8655-5:2002)Piston-operated volumetric apparatus - Part 5: Dispensers (ISO 8655-5:2002)71.040.20Laboratorijska posoda in aparatiLaboratory ware and related apparatus17.060Merjenje prostornine, mase, gostote, viskoznostiMeasurement of volume, mass, density, viscosityICS:Ta slovenski standard je istoveten z:EN ISO 8655-5:2002SIST EN ISO 8655-5:2002en01-november-2002SIST EN ISO 8655-5:2002SLOVENSKI
STANDARD



SIST EN ISO 8655-5:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 8655-5September 2002ICS 17.060English versionPiston-operated volumetric apparatus - Part 5: Dispensers (ISO8655-5:2002)Appareils volumétriques à piston - Partie 5: Dispenseurs(ISO 8655-5:2002)Volumenmessgeräte mit Hubkolben - Teil 5: Dispenser(ISO 8655-5:2002)This European Standard was approved by CEN on 13 July 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 8655-5:2002 ESIST EN ISO 8655-5:2002



EN ISO 8655-5:2002 (E)2ForewordThis document (ISO 8655-5:2002) has been prepared by Technical Committee ISO/TC 48"Laboratory glassware and related apparatus" in collaboration with Technical CommitteeCEN/TC 332 "Laboratory equipment", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publicationof an identical text or by endorsement, at the latest by March 2003, and conflicting nationalstandards shall be withdrawn at the latest by March 2003.According to the CEN/CENELEC Internal Regulations, the national standards organizations ofthe following countries are bound to implement this European Standard: Austria, Belgium,Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and theUnited Kingdom.Endorsement noticeThe text of the International Standard ISO 8655-5:2002 has been approved by CEN as aEuropean Standard without any modifications.NOTE Normative references to International Standards are listed in Annex ZA (normative).SIST EN ISO 8655-5:2002



EN ISO 8655-5:2002 (E)3Annex ZA (normative)Normative references to international publications with their relevant EuropeanpublicationsThis European Standard incorporates by dated or undated reference, provisions from otherpublications. These normative references are cited at the appropriate places in the text andthe publications are listed hereafter. For dated references, subsequent amendments to orrevisions of any of these publications apply to this European Standard only when incorporatedin it by amendment or revision. For undated references the latest edition of the publicationreferred to applies (including amendments).NOTE Where an International Publication has been modified by common modifications,indicated by (mod.), the relevant EN/HD applies.PublicationYearTitleENYearEN ISO 36961995Water for analytical laboratory use -Specification and test
methodsISO 36961987SIST EN ISO 8655-5:2002



SIST EN ISO 8655-5:2002



INTERNATIONALSTANDARDISO8655-5First edition2002-09-15Reference numberISO8655-5:2002(E)© ISO2002Piston-operated volumetric apparatus—Part5:DispensersAppareils volumétriques à piston—Partie5: Dispenseurs
SIST EN ISO 8655-5:2002



ISO8655-5:2002(E)ii© ISO2002–All rights reservedPDF disclaimerThis PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not beedited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file,parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Centr
...