EN ISO 16610-61:2015/A1:2020

Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters - Amendment 1 (ISO 16610-61:2015/Amd 1:2019)

Geometrische Produktspezifikation (GPS) - Filterung - Teil 61: Lineare Flächenfilter: Gauß-Filter (ISO 16610-61:2018/Amd 1:2019)

[Not available]

Spécification géométrique des produits (GPS) - Filtrage - Partie 61: Filtres surfaciques linéaires: Filtres Gaussiens - Amendement 1 (ISO 16610-61:2015/Amd 1:2019)

Specifikacija geometrijskih veličin izdelka (GPS) - Filtriranje - 61. del: Linearni ravni filtri - Gaussovi filtri - Dopolnilo A1 (ISO 16610-61:2015/Amd 1:2019)

General Information

• Status: Published
• Publication Date: 14-Jan-2020
• Withdrawal Date: 30-Jul-2020
• ICS: 17.040.20 - Properties of surfaces
• ICS: 17.040.40 - Geometrical Product Specification (GPS)
• Technical Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Drafting Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Jan-2020
• Completion Date: 15-Jan-2020
• Ref Project: SIST EN ISO 16610-61:2015/A1:2020 - Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters - Amendment 1 (ISO 16610-61:2015/Amd 1:2019)

Relations

• Amends: EN ISO 16610-61:2015 - Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters (ISO 16610-61:2015)
• Effective Date: 14-Mar-2018

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2020
Specifikacija geometrijskih veličin izdelka (GPS) - Filtriranje - 61. del: Linearni
ravni filtri - Gaussovi filtri - Dopolnilo A1 (ISO 16610-61:2015/Amd 1:2019)
Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters -
Gaussian filters - Amendment 1 (ISO 16610-61:2015/Amd 1:2019)
Geometrische Produktspezifikation (GPS) - Filterung - Teil 61: Lineare Flächenfilter:
Gauß-Filter - Änderung 1 (ISO 16610-61:2015/Amd 1:2019)
Spécification géométrique des produits (GPS) - Filtrage - Partie 61: Filtres surfaciques
linéaires: Filtres Gaussiens - Amendement 1 (ISO 16610-61:2015/Amd 1:2019)
Ta slovenski standard je istoveten z: EN ISO 16610-61:2015/A1:2020
ICS:
17.040.20 Lastnosti površin Properties of surfaces
17.040.40 Specifikacija geometrijskih Geometrical Product
veličin izdelka (GPS) Specification (GPS)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 16610-
EUROPEAN STANDARD
61:2015/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2020
ICS 17.040.40
English Version
Geometrical product specification (GPS) - Filtration - Part
61: Linear areal filters - Gaussian filters - Amendment 1
(ISO 16610-61:2015/Amd 1:2019)
Spécification géométrique des produits (GPS) - Filtrage Geometrische Produktspezifikation (GPS) - Filterung -
- Partie 61: Filtres surfaciques linéaires: Filtres Teil 61: Lineare Flächenfilter: Gauß-Filter (ISO 16610-
Gaussiens - Amendement 1 (ISO 16610-61:2015/Amd 61:2018/Amd 1:2019)
1:2019)
This amendment A1 modifies the European Standard EN ISO 16610-61:2015; it was approved by CEN on 9 December 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16610-61:2015/A1:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 16610-61:2015/A1:2020) has been prepared by Technical Committee ISO/TC
213 "Dimensional and geometrical product specifications and verification" in collaboration with
Technical Committee CEN/TC 290 “Dimensional and geometrical product specification and verification”
the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2020, and conflicting national standards shall be
withdrawn at the latest by April 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 16610-61:2015/Amd 1:2019 has been approved by CEN as EN ISO 16610-
61:2015/A1:2020 without any modification.

INTERNATIONAL ISO
STANDARD 16610-61
First edition
2015-07-01
AMENDMENT 1
2019-12
Geometrical product specification
(GPS) — Filtration —
Part 61:
Linear areal filters — Gaussian filters
AMENDMENT 1
Spécification géométrique des produits (GPS) — Filtrage —
Partie 61: Filtres surfaciques linéaires : Filtres Gaussiens
AMENDEMENT 1
Reference number
ISO 16610-61:2015/Amd.1:2019(E)
©
ISO 2019
ISO 16610-61:2015/Amd.1:2019(E)

© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

ISO 16610-61:2015/Amd.1:2019(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of nati
...

SLOVENSKI STANDARD
01-marec-2020
Specifikacija geometrijskih veličin izdelka (GPS) - Filtriranje - 61. del: Linearni
ravni filtri - Gaussovi filtri - Dopolnilo A1 (ISO 16610-61:2015/Amd 1:2019)
Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters -
Gaussian filters - Amendment 1 (ISO 16610-61:2015/Amd 1:2019)
Geometrische Produktspezifikation (GPS) - Filterung - Teil 61: Lineare Flächenfilter:
Gauß-Filter - Änderung 1 (ISO 16610-61:2015/Amd 1:2019)
Spécification géométrique des produits (GPS) - Filtrage - Partie 61: Filtres surfaciques
linéaires: Filtres Gaussiens - Amendement 1 (ISO 16610-61:2015/Amd 1:2019)
Ta slovenski standard je istoveten z: EN ISO 16610-61:2015/A1:2020
ICS:
17.040.20 Lastnosti površin Properties of surfaces
17.040.40 Specifikacija geometrijskih Geometrical Product
veličin izdelka (GPS) Specification (GPS)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 16610-
EUROPEAN STANDARD
61:2015/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2020
ICS 17.040.40
English Version
Geometrical product specification (GPS) - Filtration - Part
61: Linear areal filters - Gaussian filters - Amendment 1
(ISO 16610-61:2015/Amd 1:2019)
Spécification géométrique des produits (GPS) - Filtrage Geometrische Produktspezifikation (GPS) - Filterung -
- Partie 61: Filtres surfaciques linéaires: Filtres Teil 61: Lineare Flächenfilter: Gauß-Filter (ISO 16610-
Gaussiens - Amendement 1 (ISO 16610-61:2015/Amd 61:2018/Amd 1:2019)
1:2019)
This amendment A1 modifies the European Standard EN ISO 16610-61:2015; it was approved by CEN on 9 December 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16610-61:2015/A1:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 16610-61:2015/A1:2020) has been prepared by Technical Committee ISO/TC
213 "Dimensional and geometrical product specifications and verification" in collaboration with
Technical Committee CEN/TC 290 “Dimensional and geometrical product specification and verification”
the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2020, and conflicting national standards shall be
withdrawn at the latest by July 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 16610-61:2015/Amd 1:2019 has been approved by CEN as EN ISO 16610-
61:2015/A1:2020 without any modification.

INTERNATIONAL ISO
STANDARD 16610-61
First edition
2015-07-01
AMENDMENT 1
2019-12
Geometrical product specification
(GPS) — Filtration —
Part 61:
Linear areal filters — Gaussian filters
AMENDMENT 1
Spécification géométrique des produits (GPS) — Filtrage —
Partie 61: Filtres surfaciques linéaires : Filtres Gaussiens
AMENDEMENT 1
Reference number
ISO 16610-61:2015/Amd.1:2019(E)
©
ISO 2019
ISO 16610-61:2015/Amd.1:2019(E)

© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

ISO 16610-61:2015/Amd.1:2019(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of nati
...