EN ISO 7817-1:2024

Building Information Modelling - Level of Information Need - Part 1 Concepts and principles (ISO 7817-1:2024)

This document specifies concepts and principles to establish a methodology for specifying level of information need and information deliveries in a consistent way when using building information modelling (BIM).
This document specifies the characteristics of different levels used for defining the detail and extent of information required to be exchanged and delivered throughout the life cycle of built assets. It gives guidelines for principles required to specify information needs.
The concepts and principles in this document can be applied for a general information exchange and while in progress, for a generally agreed way of information exchange between parties in a collaborative work process, as well as for an appointment with specified information delivery.
This document is applicable to the whole life cycle of any built asset, including strategic planning, initial design, engineering, development, documentation and construction, day-to-day operation, maintenance, refurbishment, repair and end-of-life.

Bauwerksinformationsmodellierung - Informationsbedarfstiefe - Teil 1: Konzepte und Grundsätze (ISO 7817-1:2024)

Dieses Dokument legt Konzepte und Grundsätze fest, um eine Methodik für die Festlegung der Informationsbedarfstiefe und von Informationsbereitstellungen für die Anwendung von Building Information Modelling (BIM) in einer konsistenten Weise aufzustellen.
Dieses Dokument legt die Ausprägung verschiedener Stufen fest, die bei der Definition der Detaillierung und des Umfangs von Informationen angewendet werden, die über den gesamten Lebenszyklus von Bauwerken ausgetauscht und geliefert werden müssen. Es gibt Leitlinien für Grundsätze, die für die Festlegung des Informationsbedarfs erforderlich sind.
Die Konzepte und Grundsätze in diesem Dokument können für den allgemeinen Informationsaustausch angewendet werden und sorgen für eine im Allgemeinen vereinbarte Weise des Informationsaustauschs zwischen den Parteien in einem kollaborativen Arbeitsprozess sowie für eine vertraglich festgelegte Informationsbereitstellung.
Dieses Dokument ist während des gesamten Lebenszyklus einer baulichen Anlage anwendbar, einschließlich der strategischen Planung, des Erstentwurfs, der Ingenieurtechnik, der Entwicklung, der Dokumentation und der Konstruktion, des Betriebs im Alltag, der Instandhaltung, der Modernisierung, der Instandsetzung und des Lebensdauerendes.

Modélisation des informations de la construction (BIM) - Niveau du besoin d'information - Concepts et principes (ISO 7817-1:2024)

Le présent document spécifie les concepts et les principes permettant d’établir une méthodologie de spécification cohérente du niveau du besoin d’information et des livraisons d’information à l’aide de la modélisation des informations de la construction (BIM).
Le présent document spécifie les caractéristiques des différents niveaux utilisés pour définir le détail et l’étendue des informations qu’il est nécessaire d’échanger et de livrer tout au long du cycle de vie des actifs bâtis. Il donne des lignes directrices sur les principes requis pour spécifier les besoins d’information.
Les concepts et les principes énoncés dans le présent document peuvent s’appliquer à un échange général d’informations et, dans le même temps, à un mode communément accepté d’échange d’informations entre des parties dans le cadre d’un processus de travail collaboratif, ainsi qu’à une désignation accompagnée d’une livraison d’informations spécifiée.
Le présent document s’applique à la totalité du cycle de vie d’un actif bâti, y compris la planification stratégique, la conception initiale, l’ingénierie, le développement, la documentation et la construction, l’exploitation quotidienne, la maintenance, la réhabilitation, la réparation et la fin de vie.

Informacijsko modeliranje gradenj - Raven informacijskih potreb - 1. del: Pojmi in načela (ISO 7817-1:2024)

Ta dokument določa pojme in načela za vzpostavitev metodologije za dosledno določanje ravni informacijskih potreb ter posredovanja informacij pri uporabi informacijskega modeliranja gradenj (BIM).
Ta dokument določa lastnosti različnih ravni, ki se uporabljajo za opredelitev podrobnosti in obsega informacij, potrebnih za izmenjavo in posredovanje v celotnem življenjskem ciklu zgrajenih sredstev. Podaja smernice za načela, ki so potrebna za določitev informacijskih potreb.
Pojme in načela v tem dokumentu je mogoče uporabiti za splošno izmenjavo informacij in, medtem ko se izvaja, za splošno dogovorjen način izmenjave informacij med strankami v sodelovalnem delovnem procesu ter za sestanek s posredovanjem določenih informacij.
Raven informacijskih potreb zagotavlja metode za opisovanje informacij, ki se izmenjujejo v skladu z zahtevami glede izmenjave informacij. Zahteve glede izmenjave informacij določajo želeno izmenjavo informacij. Rezultat tega procesa je posredovanje informacij.
Ta dokument se uporablja za celoten življenjski cikel zgrajenega sredstva, vključno s strateškim načrtovanjem, začetnim projektiranjem, inženiringom, razvojem, dokumentiranjem, gradnjo, vsakodnevnim delovanjem, vzdrževanjem, obnovo, popravilom in koncem življenjskega cikla.

General Information

• Status: Published
• Publication Date: 02-Jul-2024
• ICS: 35.240.67 - IT applications in building and construction industry
• ICS: 91.010.01 - Construction industry in general
• Technical Committee: CEN/TC 442 - Building Information Modelling (BIM)
• Drafting Committee: CEN/TC 442/WG 2 - Exchange information
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 03-Jul-2024
• Due Date: 02-Jan-2025
• Completion Date: 03-Jul-2024
• Ref Project: SIST EN ISO 7817-1:2024 - Building Information Modelling - Level of Information Need - Part 1 Concepts and principles (ISO 7817-1:2024)

Relations

• Replaces: EN 17412-1:2020 - Building Information Modelling - Level of Information Need - Part 1: Concepts and principles
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2024
Nadomešča:
SIST EN 17412-1:2021
Informacijsko modeliranje gradenj - Raven informacijskih potreb - 1. del: Pojmi in
načela (ISO 7817-1:2024)
Building Information Modelling - Level of Information Need - Part 1 Concepts and
principles (ISO 7817-1:2024)
Bauwerksinformationsmodellierung - Informationsbedarfstiefe - Teil 1: Konzepte und
Grundsätze (ISO 7817-1:2024)
Modélisation des informations de la construction (BIM) - Niveau du besoin d'information -
Concepts et principes (ISO 7817-1:2024)
Ta slovenski standard je istoveten z: EN ISO 7817-1:2024
ICS:
35.240.67 Uporabniške rešitve IT v IT applications in building
gradbeništvu and construction industry
91.010.01 Gradbeništvo na splošno Construction industry in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 7817-1
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2024
EUROPÄISCHE NORM
ICS 35.240.67; 91.010.01 Supersedes EN 17412-1:2020
English Version
Building Information Modelling - Level of Information
Need - Part 1 Concepts and principles (ISO 7817-1:2024)
Modélisation des informations de la construction (BIM) Bauwerksinformationsmodellierung -
- Niveau du besoin d'information - Concepts et Informationsbedarfstiefe - Konzepte und Grundsätze
principes (ISO 7817-1:2024) (ISO 7817-1:2024)
This European Standard was approved by CEN on 18 June 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7817-1:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 7817-1:2024) has been prepared by Technical Committee ISO/TC 59 "Buildings
and civil engineering works" in collaboration with Technical Committee CEN/TC 442 “Building
Information Modelling (BIM)” the secretariat of which is held by SN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2025, and conflicting national standards shall
be withdrawn at the latest by January 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 17412-1:2020.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 7817-1:2024 has been approved by CEN as EN ISO 7817-1:2024 without any
modification.
International
Standard
ISO 7817-1
First edition
Building information modelling —
2024-06
Level of information need —
Part 1:
Concepts and principles
Modélisation des informations de la construction (BIM) — Niveau
du besoin d’information —
Partie 1: Concepts et principes
Reference number
ISO 7817-1:2024(en) © ISO 2024

ISO 7817-1:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
ISO 7817-1:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General . 3
5 Framework to specify the level of information need . 3
5.1 General .3
5.2 Consider the purposes .4
5.3 Consider the information delivery milestones .4
5.4 Consider the actors .4
5.5 Consider the objects within a breakdown structure .5
6 Definition of level of information need and its subdivision . 5
6.1 General .5
6.2 Geometrical information .6
6.2.1 General .6
6.2.2 Detail .6
6.2.3 Dimensionality .9
6.2.4 Location .10
6.2.5 Appearance .10
6.2.6 Parametric behaviour .11
6.2.7 Relationships of aspects of geometrical information and prerequisites . 12
6.3 Alphanumerical information . 12
6.3.1 General . 12
6.3.2 Identification . 13
6.3.3 Information content . 13
6.4 Documentation . 13
6.5 Relationship diagram on level of information need .14
7 Verification and validation . 14
Annex A (informative) Overview of the main concepts related to information exchange .16
Annex B (informative) Examples of methods to specify level of information need .18
Bibliography .23

iii
ISO 7817-1:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as wel
...