EN 10312:2002/A1:2005

Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions

This document amends the wording and content of EN 10312:2002 as scheduled in the following text, to enable the combined document to be used as the basis for regulatory marking.

Geschweißte Rohre aus nichtrostenden Stählen für den Transport von Wasser und anderen wässrigen Flüssigkeiten - Technische Lieferbedingungen

Dieses Dokument enthält im vorgelegten Text Vorgaben zur Änderung von Wortlaut und Inhalt der
EN 10312:2002, um das geänderte Dokument als Grundlage für gesetzliche Kennzeichnung benutzen zu
können.

Tubes soudés en acier inoxydable pour le transport d'eau et d'autres liquides aqueux - Conditions techniques de livraison

Le présent document modifie la rédaction et le contenu de l'EN 10312:2002 comme indiqué dans le texte suivant, pour permettre l'utilisation du document amendé comme base pour le marquage réglementaire.

Varjene nerjavne jeklene cevi za transport vode in drugih vodnih tekočin – Tehnični dobavni pogoji

General Information

• Status: Published
• Publication Date: 31-May-2005
• Withdrawal Date: 30-Dec-2005
• ICS: 23.040.10 - Iron and steel pipes
• Technical Committee: ECISS/TC 110 - Steel tubes, and iron and steel fittings
• Drafting Committee: ECISS/TC 110 - Steel tubes, and iron and steel fittings
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Jun-2005
• Due Date: 26-Nov-2005
• Completion Date: 01-Jun-2005
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/131 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on pipes, tanks and ancillaries, not in contact with water intended for human consumption
• Ref Project: SIST EN 10312:2003/A1:2005 - Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions

Relations

• Amends: EN 10312:2002 - Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 10312:2003/A1:2005
01-september-2005
9DUMHQHQHUMDYQHMHNOHQHFHYL]DWUDQVSRUWYRGHLQGUXJLKYRGQLKWHNRþLQ±
7HKQLþQLGREDYQLSRJRML
Welded stainless steel tubes for the conveyance of water and other aqueous liquids -
Technical delivery conditions
Geschweißte Rohre aus nichtrostenden Stählen für den Transport von Wasser und
anderen wässrigen Flüssigkeiten - Technische Lieferbedingungen
Tubes soudés en acier inoxydable pour le transport d'eau et d'autres liquides aqueux -
Conditions techniques de livraison
Ta slovenski standard je istoveten z: EN 10312:2002/A1:2005
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
SIST EN 10312:2003/A1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 10312:2002/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2005
ICS 23.040.10
English version
Welded stainless steel tubes for the conveyance of water and
other aqueous liquids - Technical delivery conditions
Tubes soudés en acier inoxydable pour le transport d'eau Geschweißte Rohre aus nichtrostenden Stählen für den
et d'autres liquides aqueux - Conditions techniques de Transport von Wasser und anderen wässrigen
livraison Flüssigkeiten - Technische Lieferbedingungen
This amendment A1 modifies the European Standard EN 10312:2002; it was approved by CEN on 25 April 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 10312:2002/A1:2005: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 10312:2002/A1:2005 (E)
Contents
Page
Foreword.3
1 Scope .4
2 Modification to the Title .4
3 Modification to the Foreword .4
4 Modification to the Introduction.4
5 Modification to Clause 1 .4
6 Modification to Clause 2 .5
7 Modification to Clause 3 .5
8 Modification to Clause 6 .5
9 Modification to Subclause 6.1 .5
10 Modification to Subclause 9.3 .5
11 Modification to Subclause 11.4.1 .5
12 Addition of Clause 15 .5
15 Evaluation of conformity.6
13 Modification to Annex ZA .
...